SD stands for Single Dart. Also when you got the 96 FPS reading, you loaded the dart before you primed. All of the other lower values afterwards, you primed before loading the dart. I'm not sure if that makes a difference, but priming when the dart is in the barrel may suck the dart in further to create a better vacuum seal and give you consistent 90+ FPS.
@@2-Way_Intersection I mean, they'd be cool if they gave something to put on it, rather than having one rail attachment released every 50 or so blasters designed
They’ve probably spread themselves too thin. Rival, elite, zombie strike, ultra, etc plus a potential brain drain and their designers might have all left
The Volt can actually be disassembled, but the internals lack proper springs, the trigger and catch just use plastic tension, which will wear out over time.
It's honestly baffling how they missed such a big opportunity with the 2.0 line. Even just the opportunity to make Accustrike the new standard or to at least just add another dang vent hole on the regular Elite darts to equalize drag in flight. They could pretty easily alter existing molds to make that little change. The whole 2.0 line has basically been Hasbro doubling down on being stingy, which is the exact opposite of what the brand is supposed to represent.
I agree. Therefore CS is Clip System (as Hasbro calls it Clips instead of Magazines/Mags) Echo CS-10, Phoenix CS-6, Turbine CS-18 and Rapidstrike CS-18 for that matter. Commander RD-6 and Shockwave RD-15 Revolver Dart. Trio TD-3 Three Dart. Warden DB-8 Double Barrel Dude Bro lol
I actually just brought myself this Blaster Today and thought that having the extra two rounds in the grip was pretty cool and i like the Tactical light, which works pretty okay for what it is
The battery, switch and LED are all close together saving on wire: Hasbro is really cheaping out on the Elite 2.0 series, but not passing on the savings to the consumer. Side note - a momentary switch on the "laser sight" is better, tactically, than having it on all the time IMO.
I always preferred the separate trigger for the light on the Firestrike because whenever I tried to use the half trigger pull on the Nitefinder, I’d always end up pulling it too far and firing the dart.
LOL. We made this blaster a couple months before any of the photos were leaked :) Including the light switch for a real flashlight inside the trigger well.
nite finder -->firestrike -->volt. it's hard to screw up the same Same Design when you've been recycling it for this long. also SD1 - Same Design, 1 shot.
I used to have a storage tote full of probably more than 50 nerf blasters. The ones I remember most were the Vulcan, 2 regular recons and one crimson walmart one, a OG blue longshot, a stampede, a bunch of furyfires and stormfires, an iron man magstrike, a raider, an OG long strike, and my first nerf blaster my Maverick that I got when I was like 8. my parents convinced me to let them sell them all as a lot for $35 at a yard sale about 5 years ago and I kick myself so much for it.
Lord Drac Fantastic look at the Volt. Thanks for showing us the pros and cons. I agree this may be the bet of thr 2.0 line. Its kinda sad that. Single Dart blaster would be the best of thr bunch. Keep up the great work. Yes Mod Guide Please.
In my opinion I love the 2004-2015 era of Nerf N Strike Blasters, the blasters looked nicely designed and more tactical, Nerf imo went downhill with Elite in 2016 as the paintjob and looks of the blasters dont look cool anymore
Is the light/laser brighter than on the Firestrike? Or does the video just make it look brighter? I enjoy a modded firestrike, but its light is VERY disappointing
the realization that Nerf employee's not using pistols in office wars is terrifying. Given recent developments, it might be that office wars may no longer be a thing is even more terrifying...
SD stands for Single Dart, I wish they sticked with the EX and IX codes for blasters like these. Also its msrp is $9.99 not $14.99, walmart strikes again
![[REVIEW] Nerf Elite 2.0 Turbine CS-18 | The New Rapidstrike](http://i.ytimg.com/vi/ySE-8bu_ffA/mqdefault.jpg)
SD-1 probably stands for single dart, but a more apt abbreviation would be “sorry drac” in regards to its lack of modding options
*Maybe its talking about its future mod potential SD "Short Dart".....*
and the 1 stands for its the first one their going to disappoint him with
@@samuelburnham4515 Oh, it's not the first.
So true lol
They need to cancel elite 2.0 and ultra
The nite finder was my first blaster I ever had. The fact that nerf still focuses on it is just amazing.
Same, but I also had a Strongarm and The jolt but it has a slide.
Mine was fire strike
Mine was original elite jolt
Yeah I had two normal nite finders and a red "dart tag" one
FOCUSes XD
SD stands for Single Dart. Also when you got the 96 FPS reading, you loaded the dart before you primed. All of the other lower values afterwards, you primed before loading the dart. I'm not sure if that makes a difference, but priming when the dart is in the barrel may suck the dart in further to create a better vacuum seal and give you consistent 90+ FPS.
Why has nerf just decided to be like “let’s just make the same blaster but more expensive and useless tac rails”
Don’t forget the lack of screws, too.
Also, if Hasbro was honest the answer would probably be:
“Money!”
tac rails are cool alright
@@2-Way_Intersection I mean, they'd be cool if they gave something to put on it, rather than having one rail attachment released every 50 or so blasters designed
They’ve probably spread themselves too thin. Rival, elite, zombie strike, ultra, etc plus a potential brain drain and their designers might have all left
Worse production quality, "rails" and shitty colour and ergo compared to elites
The Volt can actually be disassembled, but the internals lack proper springs, the trigger and catch just use plastic tension, which will wear out over time.
And I assume that because they rely on plastic tension we can't just machine sturdier parts in their place, right?
IKR
@@flametitan100 to save penny’s-_-
a fellow Xavier viewer i see
@@IcarusActual , science
It's honestly baffling how they missed such a big opportunity with the 2.0 line. Even just the opportunity to make Accustrike the new standard or to at least just add another dang vent hole on the regular Elite darts to equalize drag in flight. They could pretty easily alter existing molds to make that little change. The whole 2.0 line has basically been Hasbro doubling down on being stingy, which is the exact opposite of what the brand is supposed to represent.
They need to save pennies
@@TheOnlyPedroGameplays they *want* to save pennies, not need. This is Hasbro we're talking about.
@@stevenbobbybills toy company's are struggling right now, because of the virus.
@@TheOnlyPedroGameplays I bet Hasbro is doing just fine, they have enough in the bank to keep chugging along for years, I'm sure.
@@stevenbobbybills blaster sales are helping them a ton, but that's the thing, they're losing sales to dart zone.
Nerf: Here is some blasters we recycled
Dart Zone: Here is some god tier blasters for you for dirt cheap
Come on, don't be that mean.
He’s not being mean he just stating the obvious
fei xu I love nerf but recently they’ve been slacking
@@qdfishtail the truth stings sometimes.
Ok nerf is not *that* bad, but dart zone blasters are really good.
SD = Single Dart?
I guess so
Sad Drac
That’s what I was thinking
I agree. Therefore CS is Clip System (as Hasbro calls it Clips instead of Magazines/Mags) Echo CS-10, Phoenix CS-6, Turbine CS-18 and Rapidstrike CS-18 for that matter. Commander RD-6 and Shockwave RD-15 Revolver Dart. Trio TD-3 Three Dart. Warden DB-8 Double Barrel Dude Bro lol
@@CollectionTHX1138 a bunch of the auto blasters had ECS, with the E being electronic, and the revolvers sometimes had REV back in the day.
Most people: I WISH FOR MONEY
Nerfers: *i wish for 2.0 to be good*
I wish 2.0 didn't exist. Just give us more regular new inivative elite blasters
Nerf xtreme. Blasters hit 150 to 200 fps.WE NEED IT
@@clone734 with a red theme
M.Nasywan S.M yes. Red strike
@@clone734 i was thinking a red and black checker pattern with some other colours
I like the extra dart storage of the old one and the hook on the pull tab so you could dual wield much easier.
I actually just brought myself this Blaster Today and thought that having the extra two rounds in the grip was pretty cool and i like the Tactical light, which works pretty okay for what it is
The battery, switch and LED are all close together saving on wire: Hasbro is really cheaping out on the Elite 2.0 series, but not passing on the savings to the consumer.
Side note - a momentary switch on the "laser sight" is better, tactically, than having it on all the time IMO.
Yee
In the UK the firestrike seems to be a good seller. This looks like a good blaster. SD could stands for "Subservient to Dartzone".
I feel like dart zone hired all the good nerf designers and hasbro suffered a giant brain drain which left all the less talented workers behind
The SD stands for super disappointing and it is for the 2.0 line as a whole
Best 2.0
Literally jolt reskin
Great
"The best elite 2.0 blaster yet"
The only reason i could think of using the light is to find your way to the trash
So true
OHHH BURRRN
SD = Standard Definition. Because it’s “Elite” (HD) but actually gets N-Strike performance
I always preferred the separate trigger for the light on the Firestrike because whenever I tried to use the half trigger pull on the Nitefinder, I’d always end up pulling it too far and firing the dart.
LOL. We made this blaster a couple months before any of the photos were leaked :) Including the light switch for a real flashlight inside the trigger well.
You know you messed up when your new lines best blaster is a worse nightfinder
Any chance at a 3d printer farm update video, lessons learned, opinions on current printer options, etc?
If only this actually had screws
nite finder -->firestrike -->volt. it's hard to screw up the same Same Design when you've been recycling it for this long. also SD1 - Same Design, 1 shot.
When is the tour of castle drac coming
Sd stands for spring design
Pd stands for pump design
CD stands for clip design
Rd stands for rotary or revolver design
Yeah. I think we all want a mod guide on this solvent welded sin
At least this one can be god damn opened to actually fix it's inherent flaws, it's clipped together like an Alpha Strike blaster.
The red hurricane in the background
Agreed.
Drac, do you think it has better performance than the Firestrike and is worth buying over the Firestrike?
Not drac but honestly no
I used to have a storage tote full of probably more than 50 nerf blasters. The ones I remember most were the Vulcan, 2 regular recons and one crimson walmart one, a OG blue longshot, a stampede, a bunch of furyfires and stormfires, an iron man magstrike, a raider, an OG long strike, and my first nerf blaster my Maverick that I got when I was like 8. my parents convinced me to let them sell them all as a lot for $35 at a yard sale about 5 years ago and I kick myself so much for it.
sd obviously stands for "Secure Digital"
Ah yes, “introducing the all new, elite 2.0 volt secure digitally!”
Anyone remember when Nerf used to be decent and the go to for anyone?
Thanks for the tip on the battery compartment i definetly will use it
I got my first night finder at goodwill a couple days ago for $1 and a retaliator with no mag for $2
That's fine about The Blasters it's the one blaster that doesn't break on you in the middle of a game play
I just saw one of these irl at Walmart and the color looks better than in the pictures
I’m excited to see a mod guide for spectrum
“No here to yuk your yum” - Drac
Can someone get that on a t-shirt, best quote ever!!!
They need to do a tactical theme with LMGs and AR's, and lights and optics and shet.
That used to be Modulus and Elite. Used to.
@@stevenbobbybills yeah
So with the firestrike, is this a re-re-release
SD - single dart RD - rotating drum CS - clip system TD - Triple Dart DB - Double blasting
It's more like the firestrike than the night finder, if you ask me. 🤷♂️
Lord Drac
Fantastic look at the Volt. Thanks for showing us the pros and cons. I agree this may be the bet of thr 2.0 line. Its kinda sad that. Single Dart blaster would be the best of thr bunch. Keep up the great work. Yes Mod Guide Please.
You should do a hammershot mode to make it look like a Batman grapling hook.
More expensive with worse ergo ... but let's slap an extra rail on the bottom! I guess it evens out ... into a trip to Goodwill for a Nite Finder.
My thrift stores charge a bit much for them. A bag of 2 for 6.99 not bad but I got a secret shot two for 4.99
forget night finder i had the kenner nerf max force eagle eye is the OG and where it is at
Maybe SD means Single Dart? As in single dart firing?
lmao my nightfinder had batteries included and they still work to this day
I think it's just a firestike just 2.0 colour and a bit of difference (like of the places of laser trigger), just imo
Yeah but were do you put the batteries?
My daughter and I love the Volt blaster and we think it performs well and we been having fun with it though we got ours at target for $9.99 each
Please do a mod guide, I’m really curious to see if it follows the Nite Finder and Firestrike as excellent mod platforms.
SD probably means Single-Dart
On the bottom rail you can always put a bayonet
Hasbro: lets take old blasters make them look cool raise the price. Done
Hasbro: Hi, I like money!
Even then, alot of people dont think these blasters look good. purely subjective but on the objective side they are in no way worth it for anyone.
Have you done a review on the dark zone slingshot has anyone done a review on it????
The one thing I would change is that crappy light for something decent like a cree led.
The SD might be single dart?
will have to mod it for a 25kg medium trace spring ,like my fire strike
SD = Single dart
This applies to blasters that can only fire from 1 dart and it has other barrels for dart storage.
SD might stand for single dart. Possibly.
I just got it, it shoots super fast and it has good distance
Were so you put the batteries?
single dart, for single dart blasting. thanks for the vid drac!
Drac content =🔥🔥🔥♥️
In my opinion I love the 2004-2015 era of Nerf N Strike Blasters, the blasters looked nicely designed and more tactical, Nerf imo went downhill with Elite in 2016 as the paintjob and looks of the blasters dont look cool anymore
Is the light/laser brighter than on the Firestrike? Or does the video just make it look brighter?
I enjoy a modded firestrike, but its light is VERY disappointing
It’s basically a jolt with rails and a light
How u put batteries in the gun
A decent laser?
Elite 2.0: WE GOT MORE RAILS!
Modules: Am I a joke to you?
Dang missed the stream I’m curious how the tab on the battery tray differs from the Tool-less disassembly of the Pyara
the realization that Nerf employee's not using pistols in office wars is terrifying. Given recent developments, it might be that office wars may no longer be a thing is even more terrifying...
does adventure force nexus pro have an air restrictor
Captain Xavier has had a LOT of criticism of the volt, and he compares it to the firestrike
That’s the best pira- *jolt reskin* I’ve ever seen.
I got a nite finder for my birthday as my first blaster from my cousin
It can't be modded if you try to open it break by destroying the glue and salvent weld
Bro thx so much for this so I could use the light
Everyone forgets dart holders for extra tac rails, esp for single shots :P
I still have my original pre n strike nite finder and it’s still awesome
I am personally worried about the plastic tab they used instead of a catch spring wearing out. Really concerning.
I didn't realize you watched Drac, I just remember you from Captain Xavier!
Yeah. I watch a lot of people. Tbh i cant believe you recognized me!
@@JoltKing627 well, you DID feature a build in a featured fan builds episode where you identified yourself in the comments.
@@sambrown6426 that i did!
@@JoltKing627 I'm thinking of doing one myself when I get older.
I think the sd stands for single dart
sd as in super dull light
Sd is for single dart I think
yea sure that it does not have a good lazer pointer. the consept is still cool
Can you make a vid showing off your halo skills pls
the SD stands for Sub Draconical
Would much rather a mod guide on a Spectrum or Villainator as opposed to anything Meh 2.0
Love how forgotten the firestrike is he doesn’t even mention
Just bought one of these for $4.99 at Target. Good fun for the money
i bought it for 19.90 usd
SD - Single dart?
They are prob spending more gluing and welding these things shut than just slapping screws in them
This and the turbine might be the best elite 2.0 blasters.
When did we start calling the pro darts hornet darts?
Nite finder > Firestrike > Volt
It's Evolving, Just Backwards
Ya... I’m switching to dart zone. It is the elite 2.0 that we needed
It is hilarious how the best 2.0 blaster is a little single shot plinker.
SD stands for Single Dart, I wish they sticked with the EX and IX codes for blasters like these. Also its msrp is $9.99 not $14.99, walmart strikes again