Hey Ryan welcome back i been missing your video like crazy u definitely my favorite RUclipsr i am glad you are back and making awesome videos keep up the great work that Cummins be a great daily driver
Im pretty sure your neural safety switch is bad i had the same issue buying a flooded 5.9 cummins it would start driving in second not third Only to realize that the neutral safety switch/ sensor had not water but transmission fluid inside of the sensor what happened is its inside the trans and theres a seal that seals the internal of the sensor overtime from heat cycles or additives being added to the trans they send to swell up and soften up to the point where it lets fluid in And thats where your trans starts to act up Sometimes you wont even get a code and when you put it in park it slams hard sometimes. Hopefully yours is as simple as that but if thats the case id fix it quick because 2 weeks later my torque converter went out i did full rebuild and realized no clutches were bad but kept the new parts in with a new tc since i had them bought anyways
Ryan I’m in canton ohio. I got an 03 3rd gen rust free I’m selling. I do want to keep the bed for my cummins. But it’s got a rust free cab, doors, and front end. Rust free frame. 5.9 gasser that runs. Tranny issue so will need trailerd. After it warms up it just revs and won’t drive. So can pull on a trailer. I’m taking the bed then I’d give you the rest for $1500
I saw it coming removing that liner. It feels like 99.999999999% of those beds are shit. At least in Michigan lol I had no luck finding one anywhere when I had my 07.
ABOUT TIME!!!
Omm
My guy pops up once every 4 months and drops a lil 15-20 recap lol 😂
I think a custom flatbed build would be awesome on that dodge, make it a badass daily driver/work truck
I normally wouldn't be too excited about that truck, but knowing what you can do to it makes me excited.
Dude literally clicked on this as soon as the notification came through miss your videos but love when they come out
You haven’t had time my dude you haven’t been posting come on my guy love the content
This truck would look bad ass dually swap in the rear and a custom flat bed! 10 lug conversion too!
Dually swap flat bed 🤔🤔🤔 might have to be
i forgot about you man glad to have you back please tint the pink truck
Ayyyyy my dude! Swear I need a Cummins to build here on my channel 😂 absolutely love my 6.0 but a 3g would look nice sitting next to it 🤔
Glad to see that you are back an it’s always good to see what badass stuff you can do. Can’t wait for more to come
Hey Ryan welcome back i been missing your video like crazy u definitely my favorite RUclipsr i am glad you are back and making awesome videos keep up the great work that Cummins be a great daily driver
Glad to see you back on youtube man hope you post often can’t wait for this build!
When I first got into youtube Ryans channel was literally the first I ever Subscribed to!!!!!
Can't wait for the next Cummins upload! See you in 3 months 🙃🤭
the goat back pls stay !!
That’s the plan 😎
Finally we miss your videos hope you post more.
Build a flat bed for it. Would look sic. Welcome back. More content please.
It's really nice to watch a video of yours again thanks for blessing us with your presence
More to come ❤️
Glad ur back
Thought you quit RUclips. It's been a while.
Soo nice to see you posting again,welcome back
Man I would love that bed cover for my 96 f150
Dually / Flatbed conversion!!!
Is this video a joke? No nothing about whats been going on for months? Seriously....you were my favorite youtuber for a long time.
Glad ur back ryan can’t wait to see what u do with the 3rd gen. God bless from Rochester NY
Looking forward to this build. I'm slowly piecing together a 2004 ram 2500 4x4 Cummins myself love the truck
Good to see you post again
Yeah he’s back but where is the first gen build I am still waiting on that build
I agree, flatbed tow 🐖 would be a fun build...
always a good day when Ryan uploads
Wondering where you been at! Happy to see you post
He’s alive!! Always need more truck building motivation
Honestly should just do a flatbed. glad to see you back
Holy crap he's back
You know what would be cool paint your new ram detonator yellow and the left kit Chrome with some black wheels
Please ryan make it banana ram 2.0
Gave it an instant like to show support so you’ll post more 😂
Ryan, Buddy! Where have you been? Going into withdrawal here! Keep the videos coming, I need some new ideas for my Rebel.
I think it’s been dunked in the ocean. Can’t wait to see what’s next.
Miss you dawg
Can’t wait ti see you build this truck !!!
Dude !!! you're back. Wooohoo!!
Welcome back buddy!!!
12:50 you could've thrown that bed liner on marketplace
So glad you came back
🔥🔥🔥
Duuuuuuuuuuuuuuuude, long time no see, great to have an upload; you're definitely missed.
Glad to see your back
Im pretty sure your neural safety switch is bad i had the same issue buying a flooded 5.9 cummins it would start driving in second not third
Only to realize that the neutral safety switch/ sensor had not water but transmission fluid inside of the sensor what happened is its inside the trans and theres a seal that seals the internal of the sensor overtime from heat cycles or additives being added to the trans they send to swell up and soften up to the point where it lets fluid in
And thats where your trans starts to act up
Sometimes you wont even get a code and when you put it in park it slams hard sometimes. Hopefully yours is as simple as that but if thats the case id fix it quick because 2 weeks later my torque converter went out i did full rebuild and realized no clutches were bad but kept the new parts in with a new tc since i had them bought anyways
that trans probably just needs new gov. pressure solenoids. "BD upgraded electronics" fixed mine.
Awesome videos I always check everyday to see if you posted a new one
I have a 8ft flatbed if your interested
Welcome back or 2 the channel. Definitely Would like more videos
We need more of the goat 🐐, love your vids man
Always good to see you post man!
Welcome back brother.
just build a sick flat bed setup! Just as good and can throw some stake sides on it
Man it's been a while Ryan...miss the videos
YOU’RE ALIVE!!! 🤣🤘🤘
I know u haven't posted much but what's up with the bronco an jeep my two favorite builds of yours
Glade your back been missing your videos
Glad your back🥳🎉👍🏻
Finally make a video restore this one like you did the ford please I would love to see this
Do a flat bed build!
Good to see ya buddy
I honestly thought you quit without saying anything
Loved the video man so glad your back
Welcome back 🙏
Been wondering where you’ve been lol glad you’re back. Can’t wait to see how that limo build comes along too.
It’s going to be insane!
Well shit welcome back man missed your channel that 5.9 I have a feeling it’s going to be a total sleeper awesome content as always
Flat bed the 3rd gen and make it the tow rig
Color matched flat bed!!!
Where you been lol
Would be great to see content on new projects...keep it up👍
Where you been 👻
Ryan I’m in canton ohio. I got an 03 3rd gen rust free I’m selling. I do want to keep the bed for my cummins. But it’s got a rust free cab, doors, and front end. Rust free frame. 5.9 gasser that runs. Tranny issue so will need trailerd. After it warms up it just revs and won’t drive. So can pull on a trailer. I’m taking the bed then I’d give you the rest for $1500
It’s a short bed anyways so wouldn’t work for you
You can’t tell your viewers miss you can you 😢🤣. We do
I saw it coming removing that liner. It feels like 99.999999999% of those beds are shit. At least in Michigan lol I had no luck finding one anywhere when I had my 07.
Who uploaded!?
Are you ever gunna do a live??
Been waiting for a new vid!
Would you ever sell the pink truck
Love 3 Gen Ram 3500 5.9 Cummins Turbo crew cab Ryan Love your Green Ram 2500 6.7 Cummins Turbo Diesel Trucks
Good evening Ryan
About Time!
Yellow?
Long time no see!!
Mad AF I didn’t get the notification for this video!!
Me too!
Another one getting uploaded today/tomorrow!
What’s up Ryan 👋🏻
How is everything I havent seen you in a while
About time miss the videos
Put a flat band on that ram you bought
Bed
Make it a flatbed
GET THE ATS SHIFT SELONOD GREAT UPGDADE
I eventually wanna build the entire trans
But gonna do the solenoids first!
Where the he11 you been at
Leave it stock height
Ryan isn't a RUclipsr anymore. He'd rather work on other peoples' junk.
Honestly no 😂😂😂 I wanna work on my own stuff
My mans
See you in a few months or so again.
I have 3 videos ready to go 😘 and more on the way
Make it into a flat bed.!
Glad too see back Ryan . How about the Bronco 🇺🇸👍🏻