Lol it's not even a speaker mount, but if you wanted to run natural gas through it well there you go. Such a hack. But he says he's doing it right. I feel sorry for the people that eat this crap up and think Ryan is a custom God.
@@jwsagar4 Why would we want to hear from someone who is so critical and possibly has no experience himself...You will find the ones who are the most negative are usually mad that they didn't think to do something. Those are pure haters, alomg with a few other choice words but why waste the energy...
I like that you post your miscalculations and screw ups instead of just editing it all out. It was perfect timing too. I just sat down wondering when is Ryan posting another video and a couple seconds later the notification popped up.
U should of put a sound box with 4 prv 10" speaker with tweeters and drivers the sound quality is good and loud they are also strong with Banda amps or taramps
I love how you think just completely out of the box. Like wet sounds in a Tahoe on a custom mount out of some pipe from Home Depot, powdered cherry to match everything else just so sick & so unique I love it! And good call feeding the wire through the pipe, keeping it clean af! I know im a little late lol catching up now that I have the time again. Can’t wait to see what’s going on with the Banana ram!
Just a vital point to everybody watching this,an important part of customizing and modifications is mock up do you don’t run issues like this, Ryan I’m not raging on you, just slow down a little, it’s part of the process, Great video,
My exact thought I have actual wet sounds speakers in my jeep and on my families boat and it makes me cringe every time he calls them Wet sounds and not just “tower speakers”
You could cut the threads on the bar to have the bar flush mounted into the fittings. Just a thought. I think it would make it look cleaner. Looks great tho
Dude you have to be careful when adding speakers to factory head unit without putting an amp in!!! First of all these speakers are 200 watts not 300. They are 300 watts PEAK which is all BS. But 200 watts RMS or what they are able to handle actually is still pretty good. When tapping into your rear speakers is when a problem can happen. These are 4 ohm speakers and their impedance depends on how you wire them. If wired in parallel the resistance or impedance will be cut in half. So now the speaker is 2 ohms which gives them more power but this can cause a fire if the wiring and radio can’t handle that low of resistance. If wired in series the ohms double. I don’t know exactly how you wired the speakers but be CAREFUL!! I really think you should get a 4 channel amp just for those added speakers. With the factory radio each speaker is only getting around 10 watts each. Those speakers you added you can apply up to 200 watts to each of them. My advice, leave the original speakers connected to radio and don’t connect new speakers to it. Get a 4 channel amp that can give you 100-200 watts rms not peak to each speaker and use it for just the new speakers. Remember to look on how many ohms the amp can handle. Most 4 channels can handle 2 ohms but not 1 ohm. Please consider this for safety!!!!!
Bro you need to do this in a shop and I bet you would make millions! I can’t believe what you can do with your bare hands in one driveway. Hat goes off to you my bro 🤙🏽
Love the builds, love seeing how put your personal touch on everything....would be awesome if could do a more in depth run through on your wiring. Speakers and how you set up your relays for rock lights
I think its pretty cool that you come up with these ideas and the fact that you do all the work yourself. I read some of the comments and I understand that you will get critiqued but for everyone that's hating, put up a channel and let's see the what YOU wouldn't Do's. It's the only way to say Hey you know what he's right or wrong. Continue to stay Positive Ryan.
Why not switch out the side posts for ones that are shorter? This way you could mount the speakers on the upside and have them face out the window as you originally wanted, plus you would gain more room to move the brackets further part and I'd be willing to bet all 8's would fit. And remember, measure once, cut twice!
I have two of those in the bed of my truck will be adding 2 more and moving them under the truck tucked where the spare was but you definitely want a amp on them I have them switched so I can turn them on and off as I please
The acoustics on tower speakers are meant to throw sound a long distance, I can’t for the life of me figure out what good they would do in the back of an SUV. Even if you intended for them to be like a tailgating thing(the only real option) the speakers are still designed to throw the sound really far away, they are not normal speakers, they have an intentional purpose, unless you’re hanging out about 50 feet away from your vehicle I don’t understand why put those in.. I get they’re inexpensive, they’re also just impractical. I’m 2 mins into the video and I know by the end you’ll talk about how good they sound, but I just find that incredibly hard to believe. Not hating, I think they look cool and it’s a cool project, just very impractical in my eyes.
Nothing about this build screams audiophile to me, nothing about this is done "correctly" if he wanted truly concert quality imo best thing is replacing all with ipad dash kit into digital audio converter to your amps then for speakers relocate tweeter to aiming towards face and aftermarket car audio speakers of choice then for subs I always do a 6th order bandpass for equal hz across the sound spectrum
My dream sound system is surround sound where if you blast the music you can’t hear anything and your car is shaking more than it should but the music is still hearable And also to have room in the vehicle to actually use it
So dope bro I am the quality insurance inspector at Bentley pontoons high end boats and we install wetsound speakers in our 70 to 80,000$ elite boats sometimes our fish boats and sometimes our admirals and bro they hittttttt soooooo hard and loud and we have Amps connected to them as well also we have tower wetsounds as well so I believe ima install some in my vehicle as well plus I get employee discount on them too 💪🏾
how on earth are you getting a 12" to fit behind the 3rd row seat in a tahoe? mine has about 6inches of space behind the seat?? is that a suburban ? or are the 3rd row seats straight up and down instead of leaned back?
Nice set up. Definitely remove the fourth speaker. Get an amp for the wake board speakers. You already have hi level input for signal in the rear so just run the power. Make nice little amp rack.
You should have test fit before the powder coating because you could cut and weld that so is goes back at an angle and if you just needed it shorter The Home Depot has a pipe threader right there at least our store does and it's supposed to be like the second smallest store in either the us or texas
I would have just gotten shorter side pipes, re-powder coated them and then used all 8" speakers across the top. Then you could possibly still blast them out the back with glass up. All in all, looks good though.
When and where will you be in NC? Big fan and love to see the big lime beast in person and chat a bit. I had a lifted truck a long time ago and decided to build one again after watching your channel.
Killer sound system Ryan. That is one awesome looking Tahoe. Great work. You have some of the most bada** vehicles around. You've put alot of time and effort into having awesome vehicles.
I have a question I’m trying rebuilding a suspension on 99 Durango 4x4 myself what steering assist done you recommend for me brother from Medford Long Island 🌴 what’s up Tahoe sick love it
also i wonder if it’s a bitter sweat when you finish a project like yay it’s done looks awesome but at the same time damn what am i gonna do for the next video ? lol
I have a question to ask you. I did a big boo-boo and took my car to the car wash on my way home I noticed I had a small scratch on my windshield what can I do to get that scratch taking off? Hope you can help
Hey Ryan, those speakers aren’t upside down. That’s actually how they hook up to the bars. That’s how my wet sounds work on my Supra wake boat. Ur good man.
Do u recommend 2 smaller tube subs for a crew cab silverado. I want my bass to be equally distributed. So i figured to smaller subs to fit under seat. Suggestions from anyone please
Why didn’t you just make the speaker bar shorter and put wet speakers where the top glass is. I can’t really see on camera but it looks like it would fit that way. Either way it sounds good 👌 👍
love how he calls it a roll bar when it’s a speaker mount😂
Is it not a roll bar though?
Lol it's not even a speaker mount, but if you wanted to run natural gas through it well there you go. Such a hack. But he says he's doing it right. I feel sorry for the people that eat this crap up and think Ryan is a custom God.
Greg D so explain what would you use in this situation
@@jwsagar4 Why would we want to hear from someone who is so critical and possibly has no experience himself...You will find the ones who are the most negative are usually mad that they didn't think to do something. Those are pure haters, alomg with a few other choice words but why waste the energy...
He was talking about the Jeep you dumb assess
I like that you post your miscalculations and screw ups instead of just editing it all out. It was perfect timing too. I just sat down wondering when is Ryan posting another video and a couple seconds later the notification popped up.
Add red LED LIGHTS in the back with the speakers
Color match the interior trim on the Tahoe it would look so dope with that red
This isnt the carolinas and we arent poor
These should get a dedicated amp, I wouldn't stress your stock amp they already struggle/ don't have very good power.
U should of put a sound box with 4 prv 10" speaker with tweeters and drivers the sound quality is good and loud they are also strong with Banda amps or taramps
I love how you think just completely out of the box. Like wet sounds in a Tahoe on a custom mount out of some pipe from Home Depot, powdered cherry to match everything else just so sick & so unique I love it! And good call feeding the wire through the pipe, keeping it clean af! I know im a little late lol catching up now that I have the time again. Can’t wait to see what’s going on with the Banana ram!
Just a vital point to everybody watching this,an important part of customizing and modifications is mock up do you don’t run issues like this, Ryan I’m not raging on you, just slow down a little, it’s part of the process, Great video,
When he calls me wet sounds. Ya they not even wet sounds like 😂😂
Yeah they are junk Rockville 100 dollar speakers he can’t afford to roll with the big boys
@@reidmorin7984 have you seen his sema truck like 🤦🏻♂️he has the money I’m sure he just didn’t wanna spend that much on speakers
@@reidmorin7984 you sound dumb. Dude has a hellcat and a sema truck don’t be that guy
Why do you keep calling them Wet Sounds when they are Rockville.
My exact thought I have actual wet sounds speakers in my jeep and on my families boat and it makes me cringe every time he calls them Wet sounds and not just “tower speakers”
I know.
He should ditch those rockville speakers and put some real "wet sounds" in there.
If he thinks rockville sounds loud he is missing out.
@@samochoa6733 completely agree wet sounds is the best marine speaker you can buy in my opinion crystal clear music at extremely high volume
@@Wavy_lifestyle yeah they are 100 dollar speakers worst flex ever a deflex
@@samochoa6733 Rockville is junk he must be broke should of waited and got real speakers
Tahoe needs paint matched tow mirrors
You could cut the threads on the bar to have the bar flush mounted into the fittings. Just a thought. I think it would make it look cleaner. Looks great tho
Ignore the hate comments, if you like it then enjoy it!
“I love it when a plan comes together”
All the youngsters tryna get the joke: 👁👄👁
Dude you have to be careful when adding speakers to factory head unit without putting an amp in!!! First of all these speakers are 200 watts not 300. They are 300 watts PEAK which is all BS. But 200 watts RMS or what they are able to handle actually is still pretty good. When tapping into your rear speakers is when a problem can happen. These are 4 ohm speakers and their impedance depends on how you wire them. If wired in parallel the resistance or impedance will be cut in half. So now the speaker is 2 ohms which gives them more power but this can cause a fire if the wiring and radio can’t handle that low of resistance. If wired in series the ohms double. I don’t know exactly how you wired the speakers but be CAREFUL!! I really think you should get a 4 channel amp just for those added speakers. With the factory radio each speaker is only getting around 10 watts each. Those speakers you added you can apply up to 200 watts to each of them. My advice, leave the original speakers connected to radio and don’t connect new speakers to it. Get a 4 channel amp that can give you 100-200 watts rms not peak to each speaker and use it for just the new speakers. Remember to look on how many ohms the amp can handle. Most 4 channels can handle 2 ohms but not 1 ohm. Please consider this for safety!!!!!
Bro you need to do this in a shop and I bet you would make millions! I can’t believe what you can do with your bare hands in one driveway. Hat goes off to you my bro 🤙🏽
You should build illusion purple bed rack for ram with spare tire holder and those wake speakers
That would be dope as hell
No not those junk 100 speakers some real JL wet sounds or ds 18
Sweet. I'm a old guy now I have zero use for that many speakers. But you do you. Ignore any haters. Do what let's you sleep at night. Great videos.
Enybody else think that the big announsment is a shop
100%
Looks great! You should blast the hell out of all the "Karen's" in the neighborhood! LOL 😀
Your vids are fire bro I’ve been here since 30k keep up the good work
SOMEONE TAKE THE SOLDERING IRON AWAY FROM THIS MAN PLEASE 😂😂😂 this is why I don’t buy used modified vehicles 😂
Love the builds, love seeing how put your personal touch on everything....would be awesome if could do a more in depth run through on your wiring. Speakers and how you set up your relays for rock lights
I think its pretty cool that you come up with these ideas and the fact that you do all the work yourself. I read some of the comments and I understand that you will get critiqued but for everyone that's hating, put up a channel and let's see the what YOU wouldn't Do's. It's the only way to say Hey you know what he's right or wrong. Continue to stay Positive Ryan.
Why not switch out the side posts for ones that are shorter? This way you could mount the speakers on the upside and have them face out the window as you originally wanted, plus you would gain more room to move the brackets further part and I'd be willing to bet all 8's would fit. And remember, measure once, cut twice!
Can’t you paint the wet sound speaker outer plastics?
Love watching the Tahoe build! Can’t wait to get to some sound upgrades for my 6.0 and F150 I’m building on my channel!
I have two of those in the bed of my truck will be adding 2 more and moving them under the truck tucked where the spare was but you definitely want a amp on them I have them switched so I can turn them on and off as I please
The acoustics on tower speakers are meant to throw sound a long distance, I can’t for the life of me figure out what good they would do in the back of an SUV. Even if you intended for them to be like a tailgating thing(the only real option) the speakers are still designed to throw the sound really far away, they are not normal speakers, they have an intentional purpose, unless you’re hanging out about 50 feet away from your vehicle I don’t understand why put those in.. I get they’re inexpensive, they’re also just impractical. I’m 2 mins into the video and I know by the end you’ll talk about how good they sound, but I just find that incredibly hard to believe. Not hating, I think they look cool and it’s a cool project, just very impractical in my eyes.
Nothing about this build screams audiophile to me, nothing about this is done "correctly" if he wanted truly concert quality imo best thing is replacing all with ipad dash kit into digital audio converter to your amps then for speakers relocate tweeter to aiming towards face and aftermarket car audio speakers of choice then for subs I always do a 6th order bandpass for equal hz across the sound spectrum
My dream sound system is surround sound where if you blast the music you can’t hear anything and your car is shaking more than it should but the music is still hearable
And also to have room in the vehicle to actually use it
Love the Tahoe build it’s so sick! Also you should do a giveaway with the Tahoe so many entries for buying your merch.
So dope bro I am the quality insurance inspector at Bentley pontoons high end boats and we install wetsound speakers in our 70 to 80,000$ elite boats sometimes our fish boats and sometimes our admirals and bro they hittttttt soooooo hard and loud and we have Amps connected to them as well also we have tower wetsounds as well so I believe ima install some in my vehicle as well plus I get employee discount on them too 💪🏾
Maybe an aftermarket roof rack and bumpers?
Do you bake the parts in your kitchen oven? Or do you have one in your garage?
What kind/size tires you have on your truck and what size lift kit
U might get noise having the RCA's zip tied to the power cables
He’s never been to Louisiana it’s in literally every Tahoe and Yukon 😂😂
You need to paint that blue rockville logo red to match!
Sweet setup! You could also run 4 x 6.5s on top (and use those 4 on the Ram) and still have more than enough volume.
I never want your videos to end
This is exactly what I commented on the last video to do. Glad you took the idea came out amazing
with a Kenwood double din u can get a data link and will give u gauges on the double din back up camera tpms check engine light codes
You should get tow mirrors it would look sooo goood
Hey man just a tip when you ground your grounds you wanna grind away the paint 1st to get a solid metal connection
This is making my monday alot better.
Rockin' it Bro! Can you give some more info about the Jeep rack system that mounts to the roll bar? Need one for my Wrangler.
how on earth are you getting a 12" to fit behind the 3rd row seat in a tahoe? mine has about 6inches of space behind the seat?? is that a suburban ? or are the 3rd row seats straight up and down instead of leaned back?
Good job Ryan
Kate's channel actually introduce me to your channel but honestly both of your guys channels are great
Do another budget truck build. The Silverado was awesome
did you have any problems with your automatic steps for the rear. for some reason i am having issues with mine its a 07 gmc yukon.
Nice set up. Definitely remove the fourth speaker. Get an amp for the wake board speakers. You already have hi level input for signal in the rear so just run the power. Make nice little amp rack.
You should have test fit before the powder coating because you could cut and weld that so is goes back at an angle and if you just needed it shorter The Home Depot has a pipe threader right there at least our store does and it's supposed to be like the second smallest store in either the us or texas
Also might I recommend cutting the side bars and just moving the speakers on the top of the bar so you can open the back glass if you want
I have the same sub and tower speaker set up on my 19 1k rzr
don't take that 4th speaker out, are you able to rotate them a bit so they all fit? Looks SWEET!
I would have just gotten shorter side pipes, re-powder coated them and then used all 8" speakers across the top. Then you could possibly still blast them out the back with glass up. All in all, looks good though.
No it still looks like pipe from home depot. That you painted.
You should put 2 facing up on the sides and 2 facing down in the middle ? I mean if it fits and like that it doesn’t really block the view
I like the pipe for mounting... I might do that for my k5
Switch the doors speakers 2 bryan to like a component setup
Are you running an amp for the tower speakers and did I see you wire all 4 speakers 8 wires into 2?
What was the name of the song you played on them speakers cuz it sounded halla good
When and where will you be in NC? Big fan and love to see the big lime beast in person and chat a bit. I had a lifted truck a long time ago and decided to build one again after watching your channel.
That looks sick!!🔥
Without an amp 4 seem pointless to me I doubt there would be much of a difference if there was only 2
What’s the name of the song that’s starts at 6:30?
Killer sound system Ryan. That is one awesome looking Tahoe. Great work. You have some of the most bada** vehicles around. You've put alot of time and effort into having awesome vehicles.
why wouldn't u just put like a kenwood or jvc double din radio in instead of fighting with the line out converter
What I was thinking
Drill splatter 😂😂
Do a setup like this in the ram and if anyone has any ideas where to put some extra speakers in a ram lmk
I have a question I’m trying rebuilding a suspension on 99 Durango 4x4 myself what steering assist done you recommend for me brother from Medford Long Island 🌴 what’s up Tahoe sick love it
Looking forward to seeing the truck in the Carolinas
also i wonder if it’s a bitter sweat when you finish a project like yay it’s done looks awesome but at the same time damn what am i gonna do for the next video ? lol
I'm still recommend adding a second battery under the hood for longer run time
I love that Tahoe... I might have to get one now
Atleast now you should be able to flip the two 6.5s and have them playing out the back glass. 👍
I have a question to ask you. I did a big boo-boo and took my car to the car wash on my way home I noticed I had a small scratch on my windshield what can I do to get that scratch taking off? Hope you can help
Hey Ryan, those speakers aren’t upside down. That’s actually how they hook up to the bars. That’s how my wet sounds work on my Supra wake boat. Ur good man.
Awesome idea on the speaker setup, with those 6.5”s it’s going to look so clean and badass, good shit man. That’s awesome 🤩🔊🔊🤘🏻🤘🏻
Except the fact that they are 100 speakers
Put the two 8’s behind the rear bumper on the ram
I would have just made the top bar’s wider. Looks like you have the room for at least 3 inches. But it looks awesome.
We’re u In Indiana Saturday or Sunday bc I saw a Tahoe just like urs
You could probably do 2 up and 2 down and keep those 8 inch speakers👍
When are the front brake covers getting redone?
Do u recommend 2 smaller tube subs for a crew cab silverado. I want my bass to be equally distributed. So i figured to smaller subs to fit under seat. Suggestions from anyone please
you should use the other 2 8’s for outdoor audio like under the tahoe
Can’t you mount a tower speaker on the vertical pipe on each side and then two in the middle on horizontal.
I’m about to get some of those speakers for my Jeep
They are junk don’t buy them you got to spend the money to roll with the big boys
@@reidmorin7984 Like I do with eight 8.8 JL Audio marine speakers and 3 1000 watt amplifiers in the truck bed.
@@Gigantortacoma4x4 hell yeah big pimpin, broke boys can’t fuck with the sound
Why didn’t you just make the speaker bar shorter and put wet speakers where the top glass is. I can’t really see on camera but it looks like it would fit that way. Either way it sounds good 👌 👍
Next up: cutting the roof of my tahoe cause fuck it, the trunk was useless anyways haha
When are you going to ask Katie to marry you? ( She didn't say to ask you ) lol
I’ve also been wondering this
Love the tail lights
I think those self tapping bolts securing that mount gonna vibrate itself loose
Very nice Greetings. From. Florida ☀️
Love the pipe man
As soon as I saw the notification in RUclips I said I bet it's Ryan
Mayer.
You could put the 2-8” speakers on the top of the pipe an have 6 total lol 😂
I’ve been a fan for sooo long!! How much would it take for me to drive my truck down to you and you paint it for me!!??
Damnnnn ryan rockin with dolph👀
Always!!
Can I ask why we are putting water proof marine speakers on a suv?