For the age of that Johnson it looked excellent! on the outside, some carb clean up, some seafoam in the cylinders, I bet it runs like a champ👍, new impeller, prop serviced, it'll be good as new.😎. The boat has a weak transom. Look at the aluminum angle transom cap and you'll see at each Outer End is not against the boat, shows that the top of the transom is leaning out.
Those mid 70’s Johnson’s are strong ! Disconnect the fuel line and get a 6 gal. Boat tank and mix your gas at 50:1 , you could run stable with it or a carb cleaner but don’t run it without water ! You WILL take the impeller out and you don’t want that ! Good luck on your project ! Tri-hulls are known for stability on the water !
tri-hulls are stable boats for fishing. that old,1977 140 you have was a real power house. i had one on an old,16ft checkmate. ran around 60mph. i just built a 15.6 glastream, tri hull. has a 90hp yamaha. runs almost 50mph.
I got mine for $100 i got it running no problem I have the same motor 1978 Johnson V4 2 stroke on 1978 Thunderbird Bird Signa 17 Tri Hull, it runs strong 💪 I have a lot fun and shes 43 years old
11:00 A tree growing out of a pillow - now I've seen it all in boat restorations. BTW: engine been sitting still for a long time? First check compression. If ok continue by replacing the impeller and check & change the gear oil. Cleaning the carb is also advisable.
Hey Justin, looking forward to following along for the restoration! One of my best friends had a Invader, different style but still always look out for them now. Some good channels to follow for stuff like this are; ruclips.net/user/EricsFarmvideos ruclips.net/channel/UCcDqQAcQi-DSLK8Wv9iTtiAvideos And for fishing boat builds and electrical and bait wells; ruclips.net/user/TH3TITAN360videos
For the age of that Johnson it looked excellent! on the outside, some carb clean up, some seafoam in the cylinders, I bet it runs like a champ👍, new impeller, prop serviced, it'll be good as new.😎. The boat has a weak transom. Look at the aluminum angle transom cap and you'll see at each Outer End is not against the boat, shows that the top of the transom is leaning out.
Those mid 70’s Johnson’s are strong ! Disconnect the fuel line and get a 6 gal. Boat tank and mix your gas at 50:1 , you could run stable with it or a carb cleaner but don’t run it without water ! You WILL take the impeller out and you don’t want that ! Good luck on your project ! Tri-hulls are known for stability on the water !
Do you recommend them, if you can get them for cheap?
Camron Ramsey I do if the price is right ! Those fiberglass boats around here are either super cheap or free !
Thank you!
tri-hulls are stable boats for fishing. that old,1977 140 you have was a real power house. i had one on an old,16ft checkmate. ran around 60mph. i just built a 15.6 glastream, tri hull. has a 90hp yamaha. runs almost 50mph.
I got mine for $100 i got it running no problem I have the same motor 1978 Johnson V4 2 stroke on 1978 Thunderbird Bird Signa 17 Tri Hull, it runs strong 💪 I have a lot fun and shes 43 years old
They are good motors for sure! Thanks for watching!
Pt.2 please! I just got an old mfg and need advice on how to replace the floor boards
Just picked up a very similar boat! excited to see what you do with it!
Thanks for watching! How does yours run?
recently got one that we had to pull out of the field, very similar to the one here only mine has a 120 hp Mercruiser.
I have nearly the same boat a 1977 arrow glass cheetah that came with a 1977 Evinrude 140
I bet that ole Johnson 140 was still good 👍🏻, I have an 81 Johnson 115 that is a trooper. Ran great for over 12 years now
Looking back, I wish I’d kept it. Hindsight I suppose. Hopefully the guy I sold her to got it running again.
Couldn’t believe you got this thing for $150. Then I saw you climb in with the shovel!
Good start so far. Waiting on part 2. #antcity
11:00 A tree growing out of a pillow - now I've seen it all in boat restorations.
BTW: engine been sitting still for a long time? First check compression.
If ok continue by replacing the impeller and check & change the gear oil.
Cleaning the carb is also advisable.
Good advice. Thanks for watching!
Donnie Baker gonna be pissed he realizes his boats gone .
How it’s going so far?
I can't find the other vids
Get used to it life's ruff 🤣
Gotta teach them while they are young. Haha.
#antcity
And I have no tips but anxious to see the transformation 😊
Tana Weld Flash will be excited to see the comment! Lol
@@MrJustinWheeler I am almost certain that was even my first ever hashtag, lol
When will there be more videos
Just asking ... are you down in Oklahoma ? I’m in Minnesota just wondering !
LMAOO get used to it lifes rough. That kid is gona achieve things
Part 2 please😁
What happened to the boat!!! Lol
It’s coming! Update video in the next couple days!
I guess this was a no go?
You find any critters inside? Lol
Just worms, earwigs, and spiders. Lol
Part 2 ?
#antcity
Hey Justin, looking forward to following along for the restoration! One of my best friends had a Invader, different style but still always look out for them now.
Some good channels to follow for stuff like this are;
ruclips.net/user/EricsFarmvideos
ruclips.net/channel/UCcDqQAcQi-DSLK8Wv9iTtiAvideos
And for fishing boat builds and electrical and bait wells;
ruclips.net/user/TH3TITAN360videos
#ants
###Antcity###
#ants