I am surprised by how many people out there can't understand easy instructions. I think you did very well! There are other videos out there if you don't like this one. The nice lady was kind enough to try to help you.
Very helpful, I had the strokes within the first four minutes of your video. Thank you so much for showing this, because my daughter and I will make this to hold her school badge
Oh Wow! I can't tell you how many times I have attemped this braid. But with this video, I can really see what I am supposed to do. Thank you so much! Notw to run to my stash and find my cording :D
Not sure why everyone is hating this video, firstly we should be pleased to be getting free help of this kind, & secondly I could follow it perfectly fine, I think she explained it very well and DID show by using the 4 colors the most important parts we need to know, I’m in my 40s, I’ve never done braiding of any type, so if I can ‘get it’ in under 2 mins i can’t see why anyone else is having issues. Thank you so much for the free good help 👍😘😘
VioletSkye19: Doesn't matter your age, whether you are 40 yo or 100 yo, or if you are Donald Trump, or if you got it done in 30 seconds; this kind of work needs to be explicit visually, especially to the first time doer. This is the kind of skill you need to have clearly explained, and if not, I can understand the frustration. The lady might have explained it perfect to you, but the average watcher got confused and irritated. How about simply trying to record the same work, but with the camera further up? as simple as that. I simply went to another video and got it understood.
I found this easy to follow after the first braid. Apparently most the people in the comments belong on the short bus? Thanks for showing. Now I can see what this would look like with satin cord as a pendant necklace.
It will vary with the exact cord you're using and with your tension, but I've found that I lose about half my length in this braid. So to start with, try a little more than double your finished length.
It is very simple, the camera should be aiming at the work from the top, perpendicular to the work in process. From a side, especially with the hands partially covering some of the steps is very confusing to the eyes, trying to follow the movements. The end result is perfect and the hands are nice looking, but I kind of ''lost the thread'' too because of the angle from which the camera was aiming.
I think the best way to describe the method is "under two and over one"...the way you were saying it didn't seem to be what was being done. Super cute round braid though...
Great Video - I easily got it right on my first try. The camera angle could have been a bit better but I had no problem following what you were doing. Thanks so much.
Thank you I just started doing this and i have a lot to learn and your video was easy to understand .. i have the 4 strand box braid down and another round braid and I am Hooked this is very relaxing for me
Yep, for beginning braiders and beginning RUclipsr too! This one's pretty early days for us, but we're glad it's still helping some folks. Thanks for watching!
This video was helpful, but hard to tell what was happening at some points because your hands were over the braid. Overall helpful but a little confusing! Thanks for posting 🙂
Thank you! Your video was the first one that actually made sense 😂 I was able to get the pattern down fairly quickly, tho tension took a few more tries haha
Happy we could help! Tension is always the trickiest part of these sorts of braids and it's also something that's difficult for us to show on camera, glad to hear you kept going and found it easier with practice!
Gorgeous braid. Meant only as a rid-bit of constructive criticism, I will convey that describing as an move UNDER the middle two strands with subsequent move OVER between them would more correctly describe this movement. Also, in explaining the importance of bring each piece into place, the wording might be best understood by describing it as keeping it FLUSH. Again, a beautiful braid and one I am anxious to try. Thank you!!
Thanks for your request, we'll add it to our request list. Please keep in mind, however, that this is a pretty specific application, and we do try to fulfill requests for more generally applicable techniques first.
Make your braid a little longer than you need it to be. Then, when you're done, tightly wrap a piece of tape around the end while you hold it together. The tape should be right above where the braiding stops, so that it has a nice round, braided piece within the taped part. Then, use a pair of flush cutters to cut across the taped part, leaving enough tape to hold the ends together, but a short enough piece that the tape will be hidden by the cord end.
Feel free to experiment with different types of cord. Keep in mind that it will not keep it's flat sides if you use a round cord instead of a flat cord.
take the leftmost and bring it around the middle two and through the center of them what middle two? what center?? if your using colors say the colors name fgs
Really? All of you had trouble following that? OK, it may have been a little tough for the first couple, but if you just keep watching, you'll pick it up. It took one viewing, and I'm doing this myself now. Oh, and I'm a 38 yo male, who has never done anything like this before.
The cords are 1.4 x 3mm Diameter. You can get the supplies featured in our videos on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Wow, I don't get all of the griping. I can see just fine what you're doing. Yeah, your hands cover the work at times, but after each step you move your hands and the step becomes visible. Really like the look of the demo color combo used. TFS the colors. Suppose this would work with a narrow grosgrain ribbon? How do you calculate how much lacing to use for a specific finished braided link? Don't remember you saying how much you used for the necklace or for the demo piece. Please advise.
The instructions for adding a cord end cap to this type of braid would be the same as for kumihimo. Check out our video: How to Tie Off and Finish Kumihimo Braid Ends for two different methods.
Hima Nyeni Erie G I have personally not seen a 4 strand braid pattern for kumihimo. You can give it a try and experiment, but I am not sure what would anchor your braid to the disk if you only had 4 strands (with 8 strand kumi, at least 1 strand is always present at the 4 main points on the disk).
Does the faux leather have a smooth side and a rough side, like kangaroo leather? Also, can you tell me the best way to "finish" a braid that has a snap at the end and a handle at the other end? I want to make a dog leash...thanks!
We have a video that covers this technique in the following link: ruclips.net/video/rDr9VtEV4T4/видео.html The project in the video is for beaded Kumihimo, but it will show you how to add a bead in the center of your braid. Thanks for watching!
You can get Microfiber Faux Suede Cord on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Hello. Can you let us know what the length of each strand was before and what the final length of the product came out too be? I want to gauge how much I should cut for each strand to fit a certain length of the final product. Approximates is an ok as well. : ) Another thing... is it possible to have an extra round strand to go through the middle to sort of bulk it up?
For this tutorial, we cut a random length for demonstration. Generally, you want to add 1-2 inches to your desired length for each strand. This will help with the knots at each end. Although we do not have a tutorial on it, you could potentially braid the 4 cords around a 5th cord that goes down the center. Thank you.
The faux suede does not have a rough side, no. I'm not sure how you'd attach a snap to this sort of braid. I'm also not sure that you'd want to use it for a dog leash, it may not be strong enough.
Very helpful Thank You! As a child, I used to make the 4 strand Square ones; but haven't tried any recently. Do you have tutorial for that one please?😄
We do not have a video showing how to make a leash using this type of braid. Our expertise is in jewelry making, and our supplies are intended to be used for that purpose. I'm not sure how strong this type of braid with these materials would be for making a leash.
I thought I had seen a video of you demonstrating how this process is performed (ending the 4 cord and applying the ends), but I cannot find it. Do you have a link for this video you can share? Thanks!!!
Hello! Can you tell me what size end cap you used for this project? I am going to try to make one out of leather for a friend (he specifically wanted leather) and I would like to get the correct end caps on the first try. Thanks!
Also, I am going to be using black and two shades of brown...how would you recommend arrange the strands so it makes a symmetrical pattern? Or does it matter? I was thinking of using two black and one of each brown.
EowyntheFair88 The necklace I show as an example in the video is the Talia Necklace, and there's a link to the instructions for it in the video description. The instructions list all of the materials I used, including the end caps. I can't guarantee that it will fit exactly the same if you use a different cord. I haven't tried to make a braid like that with three colors, I would suggest doing some experimenting with the placement to see how it comes out. You can always take it apart and try again.
Thank you so much everyone else was either not talking or not doing it how I needed it
Thanks, always nice to see an old video like this still helping people!
I am surprised by how many people out there can't understand easy instructions. I think you did very well! There are other videos out there if you don't like this one. The nice lady was kind enough to try to help you.
Thank you!
Very helpful, I had the strokes within the first four minutes of your video. Thank you so much for showing this, because my daughter and I will make this to hold her school badge
Best video on RUclips on this topic. Thank you!
That's great for para cord!!!!! A lot easier than a lot of those videos!! Your awesome THANKS.....
Oh Wow! I can't tell you how many times I have attemped this braid. But with this video, I can really see what I am supposed to do. Thank you so much! Notw to run to my stash and find my cording :D
I had a hard time following other methods and yours got through to me, so thank you!!!
thanks, you helpt me out 2 years ago. and today you helpt me out again.
Not sure why everyone is hating this video, firstly we should be pleased to be getting free help of this kind, & secondly I could follow it perfectly fine, I think she explained it very well and DID show by using the 4 colors the most important parts we need to know, I’m in my 40s, I’ve never done braiding of any type, so if I can ‘get it’ in under 2 mins i can’t see why anyone else is having issues. Thank you so much for the free good help 👍😘😘
VioletSkye19: Doesn't matter your age, whether you are 40 yo or 100 yo, or if you are Donald Trump, or if you got it done in 30 seconds; this kind of work needs to be explicit visually, especially to the first time doer. This is the kind of skill you need to have clearly explained, and if not, I can understand the frustration. The lady might have explained it perfect to you, but the average watcher got confused and irritated. How about simply trying to record the same work, but with the camera further up? as simple as that. I simply went to another video and got it understood.
What are you 2 talking about? Every comment I've seen are praising her for how clear this instruction video is.
Just like challah bread! We used to make friendship bracelets like this in early grade school arts/crafts.
I found this easy to follow after the first braid. Apparently most the people in the comments belong on the short bus? Thanks for showing. Now I can see what this would look like with satin cord as a pendant necklace.
It will vary with the exact cord you're using and with your tension, but I've found that I lose about half my length in this braid. So to start with, try a little more than double your finished length.
Your voice is quite soothing and relaxing. Excellent tutorial
Great video. You just saved me about $300 on a hat band!
Glad to hear this could help!
Thanks for sharing this technique. This is really useful
Thank you...I couldn't do this braid before the video; I can do it now...Mission Accomplished..Good Job!
Thanks so much! Glad we could help!
Please... somebody mention her hands are in the way :-) I thought it was OK.
Straight and simple, thanks.
THANK YOU for showing what you promised! You have no idea how many videos that claim 4 cord braids only use two....
Very handy for making custom cables and wires too! Thanks :)
Thankyou, possibly not the desired purpose but this is the perfect braid for simple whip making and i couldn't work out how to do it!!! Tar
Easy to follow, thank you.
your instructions were very easy to follow. thank you very much I always wanted to know how to do the round braid
It is very simple, the camera should be aiming at the work from the top, perpendicular to the work in process. From a side, especially with the hands partially covering some of the steps is very confusing to the eyes, trying to follow the movements. The end result is perfect and the hands are nice looking, but I kind of ''lost the thread'' too because of the angle from which the camera was aiming.
Easiest tutorial I’ve found. Thank you!
Glad we could help, have fun!
great job Megan! the other vids of this one where confusing but you are a great teacher!
good to see you added the subtitle here.
I need to re watch again everytime i want to make the braid. thank you
You have beautifully proportioned hands.
I think the best way to describe the method is "under two and over one"...the way you were saying it didn't seem to be what was being done. Super cute round braid though...
Great Video - I easily got it right on my first try. The camera angle could have been a bit better but I had no problem following what you were doing. Thanks so much.
Thank you I just started doing this and i have a lot to learn and your video was easy to understand .. i have the 4 strand box braid down and another round braid and I am Hooked this is very relaxing for me
Everything is a bit fidgety until you learn it. Huh? 💕💕💕 Love here!
Yep, for beginning braiders and beginning RUclipsr too! This one's pretty early days for us, but we're glad it's still helping some folks. Thanks for watching!
Haters will be haters... I think she did a great job. Don't blame her if you can't follow simple instructions.
Thank you Peter...I hate to think everyone is angry and critical, but a lot are...Maybe Bead Beadaholique can Block some viewers...
I think a better description for this braid is - each side under 2 to the centre / then over 1.
saying over when she went under was driving me crazy haha
Thanks! You just gave me so much inspiration!!
I've wondered for years how this was done!! Came upon this vid after watching something else .... so glad I found it! Thank you so much!!
This video was helpful, but hard to tell what was happening at some points because your hands were over the braid. Overall helpful but a little confusing! Thanks for posting 🙂
Thank you! Your video was the first one that actually made sense 😂 I was able to get the pattern down fairly quickly, tho tension took a few more tries haha
Happy we could help! Tension is always the trickiest part of these sorts of braids and it's also something that's difficult for us to show on camera, glad to hear you kept going and found it easier with practice!
Thank you so much for this tutorial. I cant wait to start to try making one myself.
Thanks. I appreciate it. Now I know how to braid leather in four strands.
Gorgeous braid. Meant only as a rid-bit of constructive criticism, I will convey that describing as an move UNDER the middle two strands with subsequent move OVER between them would more correctly describe this movement. Also, in explaining the importance of bring each piece into place, the wording might be best understood by describing it as keeping it FLUSH. Again, a beautiful braid and one I am anxious to try. Thank you!!
This! She keeps saying “bring over” when she’s going under.
Suggestion: having the camera overhead would be better.
Thanks anyway though, nice and simple.
Thanks for your request, we'll add it to our request list. Please keep in mind, however, that this is a pretty specific application, and we do try to fulfill requests for more generally applicable techniques first.
Make your braid a little longer than you need it to be. Then, when you're done, tightly wrap a piece of tape around the end while you hold it together. The tape should be right above where the braiding stops, so that it has a nice round, braided piece within the taped part. Then, use a pair of flush cutters to cut across the taped part, leaving enough tape to hold the ends together, but a short enough piece that the tape will be hidden by the cord end.
I use E6000 to attach cord ends to braided and knotted projects.
You could make this braid with round cord, but it will look different. It would not have flat, rounded sides, but would be kind of bumpy.
Feel free to experiment with different types of cord. Keep in mind that it will not keep it's flat sides if you use a round cord instead of a flat cord.
Thanks, thats a great help!
I can see just fine. Great vid. TFS ❤️👍
Thank you very much !
Thanks, I got it first try also. Wondered how it was done
Could not see anything you were doing, your hands covered the cord
yea0h and she went to fast for me
take the leftmost and bring it around the middle two and through the center of them
what middle two? what center?? if your using colors say the colors name fgs
Pam Day dh
Really? All of you had trouble following that? OK, it may have been a little tough for the first couple, but if you just keep watching, you'll pick it up. It took one viewing, and I'm doing this myself now. Oh, and I'm a 38 yo male, who has never done anything like this before.
@@DarkKnightofThrones its a critique. If the poster is concerned about the content quality, they should consider these comments.
Thank so much for loading this. I have a good idea what to do with is. ^^
I was able to follow your video with no issues and was able to make my braid but where can I buy those clasps?
Thanks!!! From Spain. ^^
Great tutorial, thank you. :)
Thanks for the vid! It was really helpful.
Do you have a video showing how to make a handle like a leash?
Thanks
Very interesting!
Could you make a tutorial on how to make a hole on the edges of cloth and braid with using 2 color only thanks. Great video
So you have the braid completed, how do you attach the ends to the silver cord ends with it keeping its tension and not unraveling?
if you are using the 4mm diameter cord ends, how thick are the cords? are they the same diameter? Thanks.
thanks for the vid, good learning experience^.^
The cords are 1.4 x 3mm Diameter. You can get the supplies featured in our videos on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Wow, I don't get all of the griping. I can see just fine what you're doing. Yeah, your hands cover the work at times, but after each step you move your hands and the step becomes visible.
Really like the look of the demo color combo used. TFS the colors.
Suppose this would work with a narrow grosgrain ribbon?
How do you calculate how much lacing to use for a specific finished braided link? Don't remember you saying how much you used for the necklace or for the demo piece. Please advise.
The instructions for adding a cord end cap to this type of braid would be the same as for kumihimo. Check out our video: How to Tie Off and Finish Kumihimo Braid Ends for two different methods.
Would you know how to make a band out of this for a diy I watch band? Maybe it’s more braids I see ?
You can find our watch strap adapters here: www.beadaholique.com/catalogsearch/result/?type=simple&q=Watch+Strap+Adapters
i was wondering if i can use rounded cord instead of flat cord... will it work with same effect?
Is there any possibility to make this lovely braid using d kumihimo disk instead?
Hima Nyeni Erie G I have personally not seen a 4 strand braid pattern for kumihimo. You can give it a try and experiment, but I am not sure what would anchor your braid to the disk if you only had 4 strands (with 8 strand kumi, at least 1 strand is always present at the 4 main points on the disk).
Does the faux leather have a smooth side and a rough side, like kangaroo leather? Also, can you tell me the best way to "finish" a braid that has a snap at the end and a handle at the other end? I want to make a dog leash...thanks!
Would it be safe to assume that the wider the cord being used, the thicker the bracelet?
Jenifa Richards Yes, the wider the cord, the thicker the braid.
If I had a pretty bead I wanted to incorporate in the braid is that pretty easy to do?
We have a video that covers this technique in the following link: ruclips.net/video/rDr9VtEV4T4/видео.html
The project in the video is for beaded Kumihimo, but it will show you how to add a bead in the center of your braid. Thanks for watching!
thanks so much !
Do another video of this but, wrap it around a corded rope. Four strand braiding around a cord rope.
The braid is lovely, but cannot see what you are doing because your hands are covering up the work.
me too, I couldn't see what you were doing........do you have a video where we can see what you are doing with the strands?
Could you please show this type of braid with an added strong core added for a dog show leash?
Thanks so much for the suggestion!
How long do I have to cut if I want a 6 and a half inch long finished braid? Please answer.
Can we use diff types of string for this braid?
You can get Microfiber Faux Suede Cord on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Ok, you start by saying 'under two then back over one', then you change to 'over two, back kne', so, did you change the braidi g part way through?
Hello. Can you let us know what the length of each strand was before and what the final length of the product came out too be? I want to gauge how much I should cut for each strand to fit a certain length of the final product. Approximates is an ok as well. : ) Another thing... is it possible to have an extra round strand to go through the middle to sort of bulk it up?
For this tutorial, we cut a random length for demonstration. Generally, you want to add 1-2 inches to your desired length for each strand. This will help with the knots at each end. Although we do not have a tutorial on it, you could potentially braid the 4 cords around a 5th cord that goes down the center. Thank you.
The faux suede does not have a rough side, no. I'm not sure how you'd attach a snap to this sort of braid. I'm also not sure that you'd want to use it for a dog leash, it may not be strong enough.
Maybe if I could see it I would be able to do it
could you show me/ us how to end the braid with out using any metal bits please?! :) x
Thank you very much!! What's thickness of the strand you're using?
how thick will the bracelet end up being using 4 strands of 3mm cord?
The braid may be about 6mm thick. Thank you.
Does anyone know where I can get clear and concise directions on making a 4 strand round braid? So far not one video is making this any easier.
excelent work thanks for show my, care
I suppose it's possible, but I can't say for sure. I've got very short hair, so I haven't ever tried!
Very helpful Thank You! As a child, I used to make the 4 strand Square ones; but haven't tried any recently. Do you have tutorial for that one please?😄
I will pass along your suggestion to our design department.
@@beadaholique Thanks A Million!❤
What kind of glue do you use to attach the ends to the claps?
We do not have a video showing how to make a leash using this type of braid. Our expertise is in jewelry making, and our supplies are intended to be used for that purpose. I'm not sure how strong this type of braid with these materials would be for making a leash.
How much stonger is four strand braided compared to one strand is it * 2 x 3 times 4?
This technique is not really an issue of strength but rather of style and look.
We have two project videos called "How to Make a Knotted Round Braid Anchor Bracelet" and "How to Use Cord End Caps" that might help you.
could please make a vid tutorial on how to add connector???
Thank you! That was great.
I thought I had seen a video of you demonstrating how this process is performed (ending the 4 cord and applying the ends), but I cannot find it. Do you have a link for this video you can share? Thanks!!!
Sometimes all you can see is just your hands.
Hello! Can you tell me what size end cap you used for this project? I am going to try to make one out of leather for a friend (he specifically wanted leather) and I would like to get the correct end caps on the first try. Thanks!
Also, I am going to be using black and two shades of brown...how would you recommend arrange the strands so it makes a symmetrical pattern? Or does it matter? I was thinking of using two black and one of each brown.
EowyntheFair88 The necklace I show as an example in the video is the Talia Necklace, and there's a link to the instructions for it in the video description. The instructions list all of the materials I used, including the end caps. I can't guarantee that it will fit exactly the same if you use a different cord. I haven't tried to make a braid like that with three colors, I would suggest doing some experimenting with the placement to see how it comes out. You can always take it apart and try again.
Can you do this with your hair?