@@sictransitgloriamundi7033 Bull shit. This robot is not smart enough to totally replace and QC products. The point of industrial welding robots is almost always as a way to increase productivity. You take a good welder and teach him programming and give him a robot or two with one of these swivel jigs and he can double his productivity by setting up the material in the jigs and tacking it together for full welding. And when the robot runs out of wire or gas or gets a gummed up nozzle or whatever he's there to fix it for the robot.
@@mwanikimwaniki6801 I'd go so far as to say the vast majority of the time robots ONLY work when a human is around. Most industrial robots are glorified CNC machines,(no feedback or logic, just machine paths and error sensors) somebody still has to babysit, even under the best case automation scenario.
This is the kind of welding I could do. I can know the theory as much as needed. But my arms aren't going to move properly and where they need to go, (I blame that lack of ability on also not knowing how to draw). I'm sure I can program a bot.
Yes, of course. Let us know if you have any questions about robotics systems or automation at www.kuka.com/en-ca/about-kuka/contact/contact-form or in a direct message on Facebook at facebook.com/KUKAGlobal/
+capnthepeafarmer It is slow because it is in teach execute mode which is about 25% of full auto speed. The delay between the 2 is usually because with synchronised robots one is the master, the other the slave so the master controls everything and gives the start signal and you can get a slight delay from the slave robot receiving it.
there is a small delay on the beginning of the second robot, i guess no matter what there would always be a lazy guy at work.
Muito profissional essi robotico
coolest one yet.
Do robots make robots?
Do kuka bots weld on kuka bots??
I'm Kookoo for kuka puffs!
+justin gray They do have a vid somewhere of Kuka robots assembling new Kuka robots.
kuka robot know how work perfect
The company I work for bought two of these about 2 years ago and they've never successfully produced a single part.
anarchomarko that's the programmers fault... Gotta know how to weld too.
christopher, are u a kuka programmer
messaoud bernia nope but I have experience on troubleshooting robots and I've been welding for 5 years
If you're not a welder don't even try this
Sounds like two bumblebees on high octane.
Is it aluminium?
you can put 1 mm pendulation , bcuz the arcweld sound wery on the limit.
what is the worker function does this make it easier for the welder
Its goal is to replace not help
@@sictransitgloriamundi7033 Bull shit.
This robot is not smart enough to totally replace and QC products.
The point of industrial welding robots is almost always as a way to increase productivity.
You take a good welder and teach him programming and give him a robot or two with one of these swivel jigs and he can double his productivity by setting up the material in the jigs and tacking it together for full welding. And when the robot runs out of wire or gas or gets a gummed up nozzle or whatever he's there to fix it for the robot.
@@kkknotcool exactly. Robots work best when a human is around
@@mwanikimwaniki6801 I'd go so far as to say the vast majority of the time robots ONLY work when a human is around.
Most industrial robots are glorified CNC machines,(no feedback or logic, just machine paths and error sensors) somebody still has to babysit, even under the best case automation scenario.
This is the kind of welding I could do. I can know the theory as much as needed. But my arms aren't going to move properly and where they need to go, (I blame that lack of ability on also not knowing how to draw). I'm sure I can program a bot.
gredangeo or maybe knowing how to weld would be a start...
From the shadow))
Can it be customised according to our usage ?
Yes, of course. Let us know if you have any questions about robotics systems or automation at www.kuka.com/en-ca/about-kuka/contact/contact-form or in a direct message on Facebook at facebook.com/KUKAGlobal/
is it acr welding method using TIG technology ?
it's MIG/MAG method
ok thank's
Why is it so slow on the approach and retract movements? And why for the delay?
So they don't put much stress on the servo motors?
+capnthepeafarmer It is slow because it is in teach execute mode which is about 25% of full auto speed.
The delay between the 2 is usually because with synchronised robots one is the master, the other the slave so the master controls everything and gives the start signal and you can get a slight delay from the slave robot receiving it.
👍
Way steadier than a human
Can someone explain what is function of commutation in robotics
eyyy du olle
sumac kasan
dos
Anil kumar
Sounds like a bunch of cats dying
Hanzhen harmonic gear ,robot gear reducer, over 30 years experience
Kuca cai cc
First
👍