Sony Xperia 10 Plus Disassembly Teardown Repair Guide. Screen easier than Galaxy S10?
HTML-код
- Опубликовано: 10 сен 2024
- Sony Xperia 10 Plus Disassembly Teardown Repair Guide. Screen easier to pry off than the Galaxy S10?
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com...
Smallest Smartphone Thermal Camera: www.amazon.com... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupp...?acc=c5ab0bc60ac7929182aadd08703f1ec6
Thanks couldn't find a better detailed video.. Watching this from a xperia 10 cracked
Your welcome
The screen replacement is as easy as 123 now.
Before on the Z5 and Z3, replacing a screen was like studying the labyrinth of the minotaur.
This phone actually looks pretty sturdy and well built. Nice teardown.
Thanks!
Hey thanks for the very very detailed video. This video helped me fix the lcd screen on my Sony Xperia 10. Again thank you very much.
You're welcome, glad it helped :)
Woww. No more plastics bracket that they used to on their Z5 and XZ series.
Really amazing skills
Thanks!
Very good video, you can see every step perfectly 👍. adhesive strips for the accu and adhesive film for the display is also buyable (original Sony)
Brilliant video.. I'm looking to replace the screen on my Xperia 10. I'm wondering how the screen stays in place as at the end of the video you can just lift the screen part up. Is it as simple as just clicking it in? Many thanks for your awesome video, Stephen.
yeah i'm wondering that too. maybe some new adhesive is needed..?
Very useful to replace the battery, thanks !
You're welcome :)
Great
Please, Xperia xa2 plus H4493 teadown . I searched any video but, Not found thank you.
Nice
Does anyone know where I can get a new battery for the Sony Xperia 10?
At the moment no idea, they will probably pop up after a few months
@@PBKreviews Thanks for making this video. I have got the phone to the point where the red light is flashing but i can't get the phone to boot up, and Xperia companion can not restore is not detecting the device yet. Any ideas would be appreciated.
@@cortezforever Have you tried manually flashing the stock firmware by connecting the phone to the computer and flashing it from the computer.
@@PBKreviews I am actually researching flashing now. I will update.
@@cortezforever sounds good. Let me know.
Leave it to Sony to make the charger port a pain to replace. I got a loose connector (and no it's not dust or lint) and I was hoping this would be a quick fix.
lol yep not the easiest.
hola yo tengo un problema con mi xperia 10 plus ya qué no quiere funcionar el auricular frontal superior de llamadas e incluso ya lo cambie por uno nuevo y no quiere responder qué puede ser?
Make sure the earpiece and midplate are seated properly in place. Because the contacts on the back of the earpiece speaker need to touch and make a connection with the gold contacts on the flex cable which is on the frame underneath it.
Nice video bro,keep it uppp
Thanks!
Would you, please, give me advice, i`m going to replace display module to the original one which is pre-glued, so, do i have to use adhesive or glue such as B5000/7000, or it`s not necessary if the frame of the original LCD is already pre-glued ?
well its best to always get a complete screen assembly that is already attached to the touch glass panel. Aside from that, if the assembly doesn't come with pre installed adhesive, would be best to use adhesive tape instead of those glues. You can use either smartphone red tape or 300LSE adhesive tape amzn.to/2FPskki
Im struggling to find anything for the 10 ii screen replacement is this similar?
here is a link for one on amazon (amzn.to/3zdxvEL) and some on ebay (www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=xperia+10ii+lcd&_sacat=0&LH_TitleDesc=0&_odkw=oneplus+nord+n10+lcd&_osacat=0)
Hi @PBKReviews, have you heard the touch screen issue about this phone? A lot of us experience an issue with this phone after the last software update patch, I am not sure anymore if I need to have this phone open or just go to the repair store and have them check it, my problem is that the phone was purchased from Taiwan and I am from Manila Ph 😭 any idea if a software update can fix the issue? I did the software repair but it's the same thing.
Hi, I have not herd anything about that, but if a software update caused the issue, then it would not be a hardware issue and would not need to open the phone. I would wait till a newer update patch comes out to update software or see if you can flash the old software on there but usually going backwards in software would require the phone to be bootloader unlocked and so forth.
Hey, can Xperia 10 plus battery fit on Xperia 10?
hello I have an xperia 10 plus and there was a problem with the card and I wanted to know where I can get another card to fix my phone.
would be very much with the help that they can offer me
what card are you referring to?
@@PBKreviews OPS IN TRUTH I AM REFERRING TO HIS PLATE, WHERE I CAN FIND A PLATE FOR THE XPERIA 10 PLUS
Cannot remove the original battery. The adhesive is too strong and the rear cover the battery is attached to is too thin. Any ideas? Thank you.
try using some isopropyl alcohol
@@PBKreviews Thank you: your advice worked fine!
No heat sink or thermal paste that's awkward, I believe they only put thermal pad inside shield
Yep, they are just using that copper spreader on the back
What to do? After peeling off, the charger cable does not stick to the end, the tip peels off on its own
Its ok for the cable not to be firmly attached to the housing. The charger port itself seats into the housing opening for the charger port and later when you screw the midplate back in place, it holds the charger port in place and when you put the battery back in, it would hold down the cable for it as well.
I dropped my xperia 10 (not plus) and the volume down button has been depressed/stopped working. It now is stuck in safe mode. Will I have to repair this? (the volume up button works fine but the down is just jammed but doesn't turn my phone actually down)
Ya you would need to take apart the phone and unscrew the backplate holding the buttons in the frame to see if it fell out of position and re position it in its place and reassemble. If the frame is damaged causing a dent that's depressing the button then you would need to try and unbend it or shave some off around the button to be able to have the button seat properly. Either way the button being pressed down will yes put the phone into recovery mode etc with power button .
@@PBKreviews OK, thanks for your help/response. I really appreciate your advice.
@@DanceySteveYNWA no problem
my finger print sensor broke and the phone wont boot up, is there a work around that ?
You would probably have to replace the power button/finger print sensor since that would be the only way to power it on.
Hello, I reassembled the phone and the speaker does not work after. Do you have an idea of what I might have done wrong with the reassembly?
Hi, if your referring to the loud speaker, make sure the bottom small board is seated correctly in place and screwed down properly since it has gold contact points which make a connection to the loud speaker to give it power/signal. Also make sure the cables are connected and not loose.
@@PBKreviews thank you so much for your reply! I tried reseating the bottom small board and still cannot get the speaker to work. Maybe if I explain the full issue, you can help me with that too.
I originally disassembled the phone to replace the charging port and ribbon because the phone stopped charging. After ruling out cable/charger issues, I thought the charging port may be the problem because it seemed a little loose. The speaker still worked, though. But, after I disassembled the phone, replaced the charging port and ribbon and reassembled it, then the speaker stopped working and the phone still does not charge. I'm afraid I may have broken the bottom small board, or maybe I just still cannot get it seated properly, I am not sure.
If you have any insight you could share on what else I could try to get the phone to work properly again, I would very much appreciate it! Thanks again for the tip and for the great video!
@@RSanchez111 Ya not too sure. Make sure you didn't break any of the resistors on that small board or bend any of the gold pins. Since two of the gold pins make contact with the 2 gold spots on the flex cable that leads to the loud speaker.
Question: Can you still keep your current data, apps, and pictures after doing this?
Of course. Why would they be affected?
Hey do you really have to take all that off, for the fingerprint scanner
Hi, pretty much ya, since you would need to remove the battery and the main board to gain access to removing the bracket holding the fingerprint reader in place.
What part of this phone makes it an i3223 or an i4293?
Usually it's different models to specify for different regions since some versions come with different antenna bands or antenna assembly in the phone etc. But from the looks of it on this phone, the i4293 also comes with 2GB more ram.
Is there one speaker or two?.. It has two holes... But it only looked like one
There is one loudspeaker, the other hole you are seeing is probably the one for the microphone to pick up your voice.
maaaaan , i was chilling in my bed around 7am till i came across ur video , and tought to myself why not open it and clean the back camera since mine was a bit blurry , WORST DECISION EVER !! now my screen is fu*ced , i guess leave this kinda stuff to pro's
sorry to hear it got messed up. Ya usually best not to pry a screen off if its not already broken, or if you don't absolutely have to since there is always a risk of the screen getting damaged. Would have been better if this phone was designed to be disassembled from the back instead of the front to eliminate that risk.
What do you think, is this phone at least splashproof, if not waterproof???
Depends on how big of a splash :)
does the smaller version of the xperia 10 look the same
outside look is pretty much similar, has a smaller screen size etc. Inside I would assume is similar as well just smaller body size etc.
On which platform you will announce giveaway results of Moto g7 power ?
will be posted in the description of the video
So does this mean the phone is a bit protected against light water & dust?
Yea should be
@@PBKreviews But have you noticed any sign of nano coating inside the chips? I also did not notice any rubber sealant around the ports (USB, volume rocker, 3.5mm jack). You think you could do a water test please? Or are you really certain?
@@TechNomadUK1 I didn't notice any coating but where the metal shields are on the main board, the holes were covered with something white in color underneath, as well as the adhesive around the connectors. The screens adhesive didn't really seem too strong and water resistant to me but the connector ones usually I don't see on many phones so that's a good sign of them trying to keep it somewhat dust and water resistant even though its not really advertised as a water resistant phone. I don't have any water resistant adhesive to reinstall at the moment to seal the screen back on to test that, so I'm sure it would probably ruin the phone so no point in doing it.
@@PBKreviews My main worry is the everyday use. If i use the phone in light rain or i accidentally threw it in the sink (say for 1-2 seconds) with the water entering all those tiny holes of the USB charging port, headphone jack, creases around the buttons, etc. ion your opinion will it not damage the internals to the point that the phone will be totally unusable?
@@TechNomadUK1 Since they don't advertise it as water resistant and the fact it didn't have gaskets around the charger port and headphone jack etc. If it fell in the sink I would presume it would possibly cause damage. But rain should be ok unless its under it for a long period of time. But ya I don't really see this phone being water resistant like a galaxy s8 or something
Looking at this and thinking why are phones expensive with all these small parts lol 😂
Gold dude gold all yellow strips are thin strips of gold
The name of this channel comes from someone hitting the head against the keyboard?
lol no, its an old username created many years ago which means powered by life
Good effort. Next time make your video in more lighting room. And decrease the size of the video to 8 to 10 mints. I only want to appreciate your work.
disassembly xperia 1
Haahhahhahhaa you have a certained skill
Thanks : )
Congratulation! You broke it.
No I didn't. Worked just fine after.
@@PBKreviews I had a question about this
Pull tabs on a phone that isn't an iPhone? Cool
👍
You dont need the pic to remove every single thing