Nice one , I wish if you can do a video showing from the design process to how to prepare the file in 3d to engraving to the finishing touches . it will be an amazing video
Bom dia, sou de santa lucia, estado de sao paulo brasil, queria te dar os parabéns pelo trabalho magnífico que você faz, eu assisti todos seus vídeos anteriores e agora com o sininho ativado não perco nenhum vídeo novo, novamente meus parabéns pelo trabalho, magnífico, abraço e que Deus te abençoe com muita saúde paz e tudo de melhor para que você possa continuar fazendo seu trabalho.
Are these for real life use? seems the inlay got some air pockets, if you look they are rising a bit above the board it self when glued and placed? besides that it looks awesome.
Wow, your work is always so inspiring. Thanks for showing some bits of the process and clean up. I've been looking to invest in CNC for my shop partly due to watching the incredible things you make. Awesome work as always!
I think it is actually respectful to use it unless it was intended for art. It is like buying a Lamborghini to have it sitting in your garage. If I could afford a lambo I would make it my everyday car until I trade it just like any other.
@@cliffphillips9952 Actually I think he has said in a few of the videos. I want to say it was 6 or 7 mm. If I find the right video I will share his answer.
@@bstanga I think so, I dont see how you would get that detail that deep without a really steep bit. I think hes answered that question too in the past. 20 or 15 sounds right
Hi! I apologize for the strange question and what kind of boards are these? (I have been watching your case from Ukraine for a long time but I still don't understand ...)
Amazing video but the music was awful. I hit the mute button the second that broad started singing with the little piano thing. kinda makes you want to puke uggh!
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
I'd love to see a full video of your workflow from art to cam.
I could watch your videos all day. Thanks for sharing.
Титаническая работа!!! Уважение за такой труд!!!
оборудование всё сделало
Nice one , I wish if you can do a video showing from the design process to how to prepare the file in 3d to engraving to the finishing touches . it will be an amazing video
Bom dia, sou de santa lucia, estado de sao paulo brasil, queria te dar os parabéns pelo trabalho magnífico que você faz, eu assisti todos seus vídeos anteriores e agora com o sininho ativado não perco nenhum vídeo novo, novamente meus parabéns pelo trabalho, magnífico, abraço e que Deus te abençoe com muita saúde paz e tudo de melhor para que você possa continuar fazendo seu trabalho.
Love your work. Been watching many of your videos. Hope to order one soon
Are these for real life use? seems the inlay got some air pockets, if you look they are rising a bit above the board it self when glued and placed? besides that it looks awesome.
Wow, your work is always so inspiring. Thanks for showing some bits of the process and clean up. I've been looking to invest in CNC for my shop partly due to watching the incredible things you make. Awesome work as always!
Wow!
Great job, congratulations!!
Can you please advise the router bits that you are using on the amazing work
please check video description. Thank you!
Lindo trabalho 👏👏👏
Quanto tempo demora para fazer uma peça desde o projeto?
Every time watching these videos leaves me wondering who would want to use knife on these boards.
He used a knife on one he made for himself and I use a knife on one I made but it is not as nearly as good as his
I think it is actually respectful to use it unless it was intended for art. It is like buying a Lamborghini to have it sitting in your garage. If I could afford a lambo I would make it my everyday car until I trade it just like any other.
@@johnwesley6929 completely agree with you there no point not using it
Valerie, Christian, Adan, Marcella and Mary, I don't know who you are, but I wish you all the best in this world.
nice video, what are you using for a router and like your waste board
Красивая работа!
Pergghhhh cantik cun melecun aaiiihhh
Крутая идея! 👍
Wow amazing job here🤩, where do you find your v-curve tool? 30degres? Have a nice day 👌💪
This looks like the Whiteside SC 50 carving liner that I use. It is a 22 degree.
Which cnc machine do you use?
What CNC machine are you using? or is it custom built?
P.S. Love all of your work! I watch all of your videos :)
As always amazing beautiful job! 👍 thumbs up bro !!!
Great videos but one question, why do you use a band saw to cut the blocks rather than a table saw which would give you a better finish?
Maybe to reduce wasting material as a table saw blade is much thicker. Also the top will get milled anyway
holy v-carve!
Не подскажете что за порода дерева жёлтая?
another great piece, what depth do you inlay? how deep?
A lot of people ask that question but it must be a trade secret because he never gives an answer.
@@cliffphillips9952 Actually I think he has said in a few of the videos. I want to say it was 6 or 7 mm. If I find the right video I will share his answer.
@@garynorwalt6140 thats what it looks like 1/4" or so, the key is that 20 deg carving liner bit
@@bstanga I think so, I dont see how you would get that detail that deep without a really steep bit. I think hes answered that question too in the past. 20 or 15 sounds right
@@garynorwalt6140 I did this the other day ruclips.net/video/IWPhA_0czOs/видео.html
This is cool
Awesome
Yes
Would it be possible to get links to the bits you use?
Very cool)
👌👌👌
Beautiful work.
What software do you use to do the artwork?
it's adobe illustrator. But to my understanding he will need to convert it to CAD file for the cnc machine.
@@dhanniekristanto No an SVG from Illustrator will work fine.
LIKE ad, hope in the future ad will have a video about product western and eastern chess board :v
What is the species of wood that you are using that has the yellow tint?
Should have read your description below your video. Osage orange. Got it.
What finish did you use on this?
Hi! I apologize for the strange question and what kind of boards are these? (I have been watching your case from Ukraine for a long time but I still don't understand ...)
There butchers blocks and chopping boards
My son was watching with me and recommended a cutting board with a knife pocket in the side of the board, say like a fish or sashimi knife....
Tell him to get to makin one.
👍
i am first
Гравировальная фреза на сколько градусов.
I am Third :)
Image trace broo
Да станок классный. Но зачем ты показываешь как работает станок. Делай руками и пиши видео, а так хвалишься станком, а не мастерством.
вообще не хвалюсь
Так говорят только те, кто ни разу не работал на ЧПУ станке, и думают что он сам все делает тоит только кнопку нажать
Amazing video but the music was awful. I hit the mute button the second that broad started singing with the little piano thing. kinda makes you want to puke uggh!
That's the good thing about a mute button