Update log 10/10/19 Wrx -added engine -recorded new noises for the wrx Other -tape added around the battery of the impact gun to stop the battery falling out glitch -added the cleanest shirt ever +10 Armor points
Dude... you’re KILLING IT! I’ve been watching for a few years, back to the Subbie days, and I’m really impressed with what you’ve done in such a short time. Looking forward to your next video. 👍🏻
Steel disc 50cm from your knees coming loose at 8000rpm and slicing both you and your car apart Scary thought, hmm? *Should've torqued those bolts boi*
Gingium!! That’s just fuel in your oil! When you want to crank to build oil pressure you have to disable the fuel pump and not the spark, cause the whole time fuel was just dumping into the motor
Yo gingium, ive been watching and supporting your channel for a few years now and your doing a sick job dude, all your videos are perfect with no crap content, i ask one thing of you, A TOOLBOX TOUR, we need to see what tools you use on a daily basis! Keep up the good work!
I remember when you were beginning welding. You've come so far my guy, I know it sounds sappy but I'm proud to see you just being like "aight iamma pull the engine" casually. Keep up the great work man, it's obvious the passion is there.
He mistakingly had a shot of it a few weeks ago in a video, then pasha showed it too I think. He said in the live stream he did fixing this engine again where he said hes waiting on trim peices, then it will get a video when its actually done exterior wise.
things i got from this video -flywheel is going to take off like a rocketship -the wrx/miata swap will probably never happen -pasha needs new pants -bearded man had magic hands -subarus leak a lot
Really recommend running 10w40 motorcycle oil in that thing absolutely no detergents and it's a nice heavy weight oil. Once you're done with break in switch to 10w40 Valvoline ej's love that oil.
Look at Caleb using a vice to fabricate like he knows what the fuck he's doing! You've come a long way since I subscribed during the shop move. I'm proud of you.
If you look at the rear corner panels and the tail lights it's obvious that this is the body of a 2004 to 2005 STI... So you have a blob eye STI with the bug-eye front conversion kit and the JDM built motor... Cool
number 4 cyl water by-pass and re-plumb the fuel line ! = 2 very important mods = Fuel pressure regulator ! a better way = great video thanks = my 2001 sf5 forester STI swapped ej207 and all the gear .
FYI: if you have coolant in oil, your oil will actually gain viscosity compared to oil that isn't contaminated with coolant. The other giveaway that an oil analysis will catch is high levels of potassium in your oil from the coolant.
Awesome G. Still don't think swapping to the Miata will fit. Gut the Subaru and lift it, Molly's old motor goes in the Rally Miata when Molly gets the hot motor you bought.
Maybe fuel made its way passed the rings while cranking the engine to build oil pressure, causing the oil to be thin after the first start Idk if the ecu injects fuel with the cam/crank sensors unplugged.
Lol the window switch starting working after hitting it, I will have to try the same thing as I went and looked at a 2004 Subaru Impreza yesterday and the passenger side window switch didn't work either so if I end up buying it I will have to try that. 😂 But what can you expect as the window switches are actually made by Nissan which I found out yesterday. Nice video and keep up the great content!
That long block is beautiful brother. So simple yet so clean! Excellent job. This is the first video that I'm watching of yours. What are you going to be running for a turbo?
Personally, i would rather want to see an actual rally miata build, not an offroad one or just a rally subie. Still gonna watch whatever you are gonna do
I've used that method on my wheel covers. They are just plastic bolts but you need to turn them like 5,000 times before they go tight so I get lazy. :P
8:52 Prolly cause the intake manifold wasn't connected to the turbo. Without the intake tract complete, the amount of air entering through the throttle body isn't the same as the MAF reading.
The taillight issue is a ground wire problem, i know because i have a customer car that has the exact same problem, havent fixed it yet tho, i have to repair the whole front suspension first
Unless Subaru motors are different from every other engine then you definitely want to hold it at 1500-2500 for 30 minutes on the first start up to bed in the bearings and then a handful of mild pulls from 30-50 to set the Piston rings.
it doesnt like the MAF sensor at 8:50 because the intercooler is not present to complete the air flow path from the turbo to the engine. the mass airflow sensor is providing false data because any air being metered by the sensor is not actually entering the engine, it is being lost to ambient after the turbo. Since the engine doe snot know ho much air is entering the engine it doesnt run properly. When you completely disconnect the mass airflow sensor , the ECU is calculating the airflow via the MAP sensor on the throttle via a primitive speed density tune
Who remembers the wagon days 😭
F
F
F
F
F
Update log 10/10/19
Wrx
-added engine
-recorded new noises for the wrx
Other
-tape added around the battery of the impact gun to stop the battery falling out glitch
-added the cleanest shirt ever +10 Armor points
painted the dadsun ... as you can see in the back
zippyoya pretty much
@@klei_mouka9087 shhh, that is only in the dev build
-Zip ties to attach radiator
zippyoya I appreciate you
"it don't like the MAF"
*has turbo shooting air nowhere*
Oooh! The Datsun is painted!!
was looking for this comment. looks pretty dang good!
Right saw that right away
No it's not you don't see anything
@@VS666 yeah! Its gonna be great!
@@cccraigslist replay the video and you can see it in the beginning
We already know gingium is going to fall back in love with the wrx and never swap it into the miata...
Simon Villeneuve I’m okay with it
Wrx>miata
I wouldnt blame him tbh, id end up doing the same thing
Totally okay with that.
Let's hope. Bugeyes are kinda hard to get now.
Dude... you’re KILLING IT! I’ve been watching for a few years, back to the Subbie days, and I’m really impressed with what you’ve done in such a short time. Looking forward to your next video. 👍🏻
Thanks man!!!
Really hope you put loc-tite and torqued those flywheel bolts.....
I was also looking at that and wondering. What the heck
Flywheel gon' fly
He didn't and that's a scary thought. That flywheel shooting out
Steel disc 50cm from your knees coming loose at 8000rpm and slicing both you and your car apart
Scary thought, hmm?
*Should've torqued those bolts boi*
Jey how would you know? He doesn’t have to record doing that lol
Can't wait for
*_WRX Update: Pasha Blew the Clutch_*
Isn't Pasha like 3 for 3 on blowing clutches?
7:30 Damn That skyrim graphic mod sure improved the Graphics smithing looks so awesome now
😂😂😂
Gingium!! That’s just fuel in your oil! When you want to crank to build oil pressure you have to disable the fuel pump and not the spark, cause the whole time fuel was just dumping into the motor
But he unplugged the crank sensor which stops the injectors from getting a signal to fire
Gingium: Testing the horn
Pasha pants: Dislike this
subie owners be like:
2003 bug eye Subaru 289,XXX miles 5 speed $6500 I know how much it's worth no lowballs
welp u already fucked it up by saying bug eye after saying 2004... but ok.
jiffy pretty much lmfao
@@Jiffydewd huh
@@stevenschroder3428 good, you changed it to 03
@@cavecanem1741 yeah misclicked lmao
“Doesn’t like maf” has no Intercooler on 🤣
Yo gingium, ive been watching and supporting your channel for a few years now and your doing a sick job dude, all your videos are perfect with no crap content, i ask one thing of you, A TOOLBOX TOUR, we need to see what tools you use on a daily basis! Keep up the good work!
the Dadson looks sick in metallic black btw
The fuck is a Dadson?
@@Natschke_Family_Adventures you're new to the channel?
@@Natschke_Family_Adventures i'll explain, that is the Datsun project between Gingium and his Dad.
I remember when you were beginning welding. You've come so far my guy, I know it sounds sappy but I'm proud to see you just being like "aight iamma pull the engine" casually. Keep up the great work man, it's obvious the passion is there.
Thanks dood
7:43 looks like Chris Hemsworth has some competition 😂
No need for a datsun roadster color reveal video now 😢😭
Came in to the comments for this
Did i miss the painting of the dadsun or is that an upcoming video?
Upcoming huge spolier xDD
i was wondering the same thing
He mistakingly had a shot of it a few weeks ago in a video, then pasha showed it too I think. He said in the live stream he did fixing this engine again where he said hes waiting on trim peices, then it will get a video when its actually done exterior wise.
7:34
Wait, when did he actually mount his bench vice?
Months ago maybe a year now
like 5 months ago
That's a skillsUSA Lanyard. The good old days of competing and making many new friends are flooding back to me.
things i got from this video
-flywheel is going to take off like a rocketship
-the wrx/miata swap will probably never happen
-pasha needs new pants
-bearded man had magic hands
-subarus leak a lot
I love the color of the datsun
Gingium I like the Rotaryium Shirt
0:39 the datsun is painteddddd!!! hell yeaaaah
Look, never lose that wonderful wrench-microphone. Its great and its basically a staple of this channel now ;)
Really recommend running 10w40 motorcycle oil in that thing absolutely no detergents and it's a nice heavy weight oil. Once you're done with break in switch to 10w40 Valvoline ej's love that oil.
Look at Caleb using a vice to fabricate like he knows what the fuck he's doing! You've come a long way since I subscribed during the shop move. I'm proud of you.
thanks guy for your video. I come from New caledonia and continue to share us yours videos!
I thumbs up anyone getting dirty out there. Former bug eye owner here. Great job
My boy needs to be sponsored by Kellogg's asap!! He can be thier model😂🙏
Oooo production quality looking crisp.
i love how your channel has evolved over the years
Great you got the Soobaroo moving and on the road. Also error light at the dashboard that would be an instant MOT failure.
Our break in is u start it up. Let it warm up. If no leaks. Do 3 or 4 hard hits. Change the oil and thats it.
First thing i noticed is the dadson's paint. Looks amazing!
Who saw the datsun is already painted, am i missed something?
Well, I guess we know what color you painted the Datsun. I'm stoked for new videos on that one, definitely my favorite project going.
That’s pretty awesome. From a box of parts to a running driving engine. Must feel good.
Feels really good! Especially since this was the first time I built a motor 😁
Although let's be honest Zach built most of it...
If you look at the rear corner panels and the tail lights it's obvious that this is the body of a 2004 to 2005 STI... So you have a blob eye STI with the bug-eye front conversion kit and the JDM built motor... Cool
The throw out bearing stream was lit
Hell yeeeee
I must say bro, the jorts are POPPIN in this vid.
Everything's getting a motor before molly does, jesus the anticipation is killing me!
I havent seen someone wear Jean shorts in probably 10 years. Thank you
Hey caleb I’m a huge fan and was just wondering how you learned to understand what to when modding or fixing your cars and where you learned it
I learned by just doing it and messing up a bunch haha.
But seriously tho!
Whilst it is true there is no replacement for displacement. It is equally true there is no replacement for experience.
Is that a painted Datsun I see in the background
I just swapped my ej22 for a ej205 in my 97 outback love it
7:30 -7:45 Gingium be looking like Wilson Fisk trying to fight anyone lmaoo
That datson looks great in that color
i'm so stoked for this to go in the rallyata!!
For the love of god keep this Subaru and find a different EJ to drop in the rally Miata!
No
Take madik yes
@@rammithorn2654 no
@@rammithorn2654 it's not even a hatchback
Take madik if it’s not a hatchback it means it’s better
Dude that's sick I have a 05 impreza 2.5 rs that sadly doesn't have a built motor
Nice to see the datsun being painted
number 4 cyl water by-pass and re-plumb the fuel line ! = 2 very important mods = Fuel pressure regulator ! a better way = great video thanks = my 2001 sf5 forester STI swapped ej207 and all the gear .
nice and early. loving the content my guy. stuuu for dayz. when are you getting the built mx5 motor
Pasha mentioned in the stream that it was built in Florida and ready to be picked up.
FYI: if you have coolant in oil, your oil will actually gain viscosity compared to oil that isn't contaminated with coolant. The other giveaway that an oil analysis will catch is high levels of potassium in your oil from the coolant.
"Well I think that throttle cable works" has an engine runaway
great work gingium
I didnt get a notification just got the ping from your discord
Awesome G. Still don't think swapping to the Miata will fit. Gut the Subaru and lift it, Molly's old motor goes in the Rally Miata when Molly gets the hot motor you bought.
Maybe fuel made its way passed the rings while cranking the engine to build oil pressure, causing the oil to be thin after the first start
Idk if the ecu injects fuel with the cam/crank sensors unplugged.
I think you're right!
Lol the window switch starting working after hitting it, I will have to try the same thing as I went and looked at a 2004 Subaru Impreza yesterday and the passenger side window switch didn't work either so if I end up buying it I will have to try that. 😂 But what can you expect as the window switches are actually made by Nissan which I found out yesterday. Nice video and keep up the great content!
great work man, glad everything went pretty smoothly. I love bugeyes!
My man was really wearing jorts
Loving this build...also is the Datsun already painted in the background?
Love the colour on your dad's car
Love that your videos ain't like 25 mins long!!!
Datsun looking good
Another one back on the road! 👍
You should put the rally Miata's motor in the Subaru and daily it
Slowest subie in the world
That long block is beautiful brother. So simple yet so clean! Excellent job. This is the first video that I'm watching of yours. What are you going to be running for a turbo?
when are you getting Matt’s built 1.8 for molly?
Cool paintjob on the dadsun
Personally, i would rather want to see an actual rally miata build, not an offroad one or just a rally subie. Still gonna watch whatever you are gonna do
Great video. Whats the difference between ej-25 and ej-205
Rotella T6 5w40 for the win
That sound 😍😍 making me miss my Hawkeye
Datsun looks great !!!
0:49 proper torq specs on that is when the impact stops turning
😂 exactly
I've used that method on my wheel covers. They are just plastic bolts but you need to turn them like 5,000 times before they go tight so I get lazy. :P
7:43 me in full dragon bone armor and a dragon bone mace coming across a mud crab minding its business by a river
NICE FAB WORK BRO
First off, fuck yes now the ej is running. Woohoo! Second off, I love your choice in music. Thirdly, nice color on the datsun. 💖
Ik I ain't the only one who laughed the way he was hitting that metal to make the bracket😂
8:52
Prolly cause the intake manifold wasn't connected to the turbo. Without the intake tract complete, the amount of air entering through the throttle body isn't the same as the MAF reading.
earned yourself a sub my dude, keep up the good work!
The taillight issue is a ground wire problem, i know because i have a customer car that has the exact same problem, havent fixed it yet tho, i have to repair the whole front suspension first
Unless Subaru motors are different from every other engine then you definitely want to hold it at 1500-2500 for 30 minutes on the first start up to bed in the bearings and then a handful of mild pulls from 30-50 to set the Piston rings.
Damn the Datsun is looking fresh
What's the SkillsUSA lanyard for?
This is how many cars gingium have
👇
16?
Any chance of a full “assembly disassembly “ video? Clips from all as a sort of tutorial type thing, they usually get good views
it doesnt like the MAF sensor at 8:50 because the intercooler is not present to complete the air flow path from the turbo to the engine. the mass airflow sensor is providing false data because any air being metered by the sensor is not actually entering the engine, it is being lost to ambient after the turbo. Since the engine doe snot know ho much air is entering the engine it doesnt run properly. When you completely disconnect the mass airflow sensor , the ECU is calculating the airflow via the MAP sensor on the throttle via a primitive speed density tune
The Datsun is painted!!!!!
Bugeye FTW!!
Great oil to run after break in is Redline synthetic or amsoil is another good choice
Painted honda!!!! NIIIICEEEE
That horn test jarred me out lol.
Let new adventures begin!!!
Honestly. You should keep the WRX as your daily
If you used assembly lubrication, you will find some discoloration in your oil for the first oil change. No worries whatsoever.