TBS CROSSFIRE NANO SUPER SIMPLE SETUP
HTML-код
- Опубликовано: 8 сен 2024
- Super simple setup for the TBS Crossfire Nano.
Hello, if you like my content please consider supporting my channel with the links below. Or you could Buy me a Coffee 👉 www.buymeacoff...
AFFILIATED LINKS
DRONE AUTHORITY - droneauthority...
BANGGOOD - uk.banggood.co...
=========================================================
BELOW IS A LIST OF MY FAVOURITE GEAR TO RIP WITH
MICRO QUADS / ALL SUB 250g
GEPRC CinePro 4K HD www.banggood.c...
GEPRC GEP-CX CYGNET 145MM www.banggood.c...
GEPRC GEP-PX3 www.banggood.c...
UK/US 65 WHOOP www.banggood.c...
=====================================================
5INCH QUAD
GEPRC GEP-KX5 www.banggood.c...
=====================================================
ON MY HEAD
SKYZONE GOGGLES www.banggood.c...
ORT MICRO PATCH www.banggood.c...
======================================================
MY FAVOURITE TRANSMITTER
THE TANGO 2 www.hobbyrc.co...
======================================================
SOME MORE AWESOME FRAMES TO CHECK OUT
GEPRC MARK 4 www.banggood.c...
GEPRC CINEEYE www.banggood.c...
GEPRC PHANTOM TOOTHPICK www.banggood.c...
GEPRC MARK 4 HD5 www.banggood.c...
Thanks for dumbing it down for me. Thanks again. 😊
No worries!
Really appreciate these simple sort of walkthrough videos, thank you mate. Everyone forgets how difficult and intimidating that first time setting up can be before everything kind of clicks in the mind,.
Glad to help, I try to made this type of video Super simple for new pilots because I remember how complicated it can be. Thanks buddy glad you liked it...
Thank you no more paying someone to do this. The Uar6 and changing to CRSF was key, soldering was easy I was just missing the tabs part. Thank you
👍👍👍 You're welcome buddy
Spent so much time to learn this and you explained it so simply thankyou so much 👍👍
Thank you, glad you found it useful.
Just got crossfire last night and I'm exciting to switch crossfire from xm plus receivers! This is really great tips and thank you so much! 👍🏼
Glad you liked it
The best simplest nano rx video ever !!!! 👍👍👍👍👌👌👌👌👌👌 thank you I just got my Tango 2 4 days ago have updated tx just trying to get it wired up now. I have the succex E F 405 FC.
Thank you, very much appreciated. you should be fine with that Iflight board, good choice
AWESOME THANKS A LOT!!! I was struggling with with the UART port setup in betaflight Thank you...
Glad it helped!
Looks good mate - very handy for pilots who are new to installing these - good stuff mate
Thanks Bro
Subbed! Finally someone who really dumbed it down. My question is due you loose latency by going SBUS? You mentioned you at least get to keep RSSI what about smart audio? :)
Hi, thanks for the Sub. No, you won't lose latency, and yes you can still get smart audio if you have a smart audio pad on your flight control board. But you will have to wire it, from a spare pad on the TBS Nano, then select the channel in the ports tab. To find out which channel you're using on the nano if you google ( pinout for tbs nano ) so you know which channel your using see link
and go to page two. www.team-blacksheep.com/tbs-crossfire-nano-quickstart.pdf
This reads more complicated than it is to do ( Sorry about that ) It's basically adding another wire from the Nano to the smart audio pad then telling Betaflight which channel you put it on.
However, If you have a spare RX/TX pad on your flight control board it's much easier to wire it up the first way and get full Crossfire in one go. Hope this helps
@@GeorgeCooper_LoneWolf Excellent explanation! This makes perfect sense. I'll have to watch your archive videos. I'm sure there's more Intel that I can learn from. Thanks for doing this for us "new" people 😁🤙🙌. One question I did have you can't share a pad for smart audio correct? I have a stack that connects to each other and I'm pretty sure its being used within that pin connector.
@@armani007E55 Happy to help. What stack are you using ? if you're not sure because you have a ready to fly quad, just let us know which quad you have and I will look it up and get back to you.
Great class George..cheers!😎👍
Thank you buddy
Good video. Can I use the normal way to hook up to flight controller (rx,tx) . And still use channels 3,4 (pwm)for like servos( independent from the flight controller )
I believe so... Sorry about the late reply
Hello from north Carolina just found your channel thanx for the info im about to make the swap from frsky to crossfire and your content was very helpful.
Thank you, your very welcome I'm glad you found it useful.
Same wiring on the Nano Diversity? And thank you!
Yes, just the same mate.
( CH 1 = TX goes to RX on the flight board)
( CH 2 = RX goes to TX on the flight board)
Great video 👍
cheers buddy
Thank you so much
Your very welcome, glad you enjoyed the video
Got a new subscriber 👍👍👍👍
Awesome thank you!
nice thx:-)
cheers
Hi George, just came across this video as I am switching to crossfire. Great video indeed!
I just have a question. You mention nano rx can be hooked up to an sbus pad on the FC but usually sbus pads are inverted uarts for Frsky sbus and I understand that in this particular case the nano rx will not work. Can you please confirm you need a non inverted pad (or a regular non inverted uart) to make it work? Thanks!
If you wire the TX from the Nano to the Sbus pad on your FC you should have no problems. However, don't forget you need to select Sbus in betaflight on the configurations page "NOT" CRSF and change from crsf to sbus in your radio.
If you still have problems tell me what FC board your using and your Transmitter / Crossfire set up, so I can try and help more. Also, don't forget to update your Nano & Crossfire in TBS Agent X
@@GeorgeCooper_LoneWolf ok thanks I will try this and get back to you. Interesting as I understood it would not work on an inverted sbus dedicated uart. By the way my FC is a mamba F4
@@GeorgeCooper_LoneWolf it works! Thank you so much!
@@erich7431 😃 Great news buddy, glad you got it working
Hello George, i need help: my tbs crossfire nano lost the antenna when flying, after that the rx keeps flashing, after I bind the receiver is connected but disconnected again after the battery is removed. Is my RX broken? thank you
There's a chance the nano got damaged after the antenna came off. However, you may be able to sort it with a firmware update. Download the latest virion of
(Agent X ) from the TBS website "Take the props off" your quad then plugin your TBS transmitter/module to your PC and plug in a battery and power up the Quad whilst running Agent X first of all update the nano then update the transmitter with the same firmware version you updated the nano. Normally you would do this the other way around but try it. If this does not work then it may be damaged beyond repair and you will need a new one SORRY. Hope this helps buddy...
@@GeorgeCooper_LoneWolf thank you so much, George. very much appreciated 🙏❤️🥃🥃
@@doktordrone Your welcome buddy
Hi, i have also the tbs tango 2 and its says sometimes "sensor lost" having 99% rssi.... what that means?
First thing don't panic (Not a big problem) More of a pain to your ears than anything ells, and don't worry about the RSSI as long as your getting a good signal your fine.
Now assuming you have no lose wires on your receiver, this can sound off because of a glitge and a firmware update will sort it out so try that first. Now if that dose not work, as funny as it sounds you can simply remove the Sensor loss sound your getting, Hears step by step how to do it on the Tango 2.
#1 Press and hold the menu button to get into Radio settings
#2 Press the page button once to get to the SD Card tab
#3 Scroll down to sounds and click enter (on the scroll wheel)
#4 Select ( en ) = English and click enter
#5 Now find your sensor sound ( you can click enter to play the sounds to find the right one, and once you have you can either Rename it witch should stop it from sounding off, or Delete it, however if you rename it you can always reset it up again if needed for any reason ( so make a note of the original name )
hope this helps.
I'm new to the hobby, is this the only receiver that I need for using tango 2 controller. I'm using dji fpv system but want to use crossfire for radio controller.
The Tango 2 can only be used with any TBS Crossfire revivers. But this is the best. But you can't use this receiver with the DJI Transmitter
George Cooper would you mind if you can guide me what receiver should i get or link ? I appreciate it. 🙏 thank you
@@kevinfuentes1325If you want a receiver for the Tango 2 get this one But if you what a receiver for the DJI transmitter. That's built into the
( DJI FPV Air Unit )
@@GeorgeCooper_LoneWolf Thank you ! is tango 2 good for long range too and better than dji transmitter? Also, to wire up this tbs crossfire nano.. I have to wire it up for sbus right just the 5v, ground, and then sbus? I really appreciate it.
@@kevinfuentes1325 The Tango 2 will give you plenty of range ( between 2 / 15 miles ) depending on where you fly. I don't know if it's better than the DJI Transmitter because I don't use one. As for Nano and how to wire it up all the information is in the video. Hope this helps.
is this same goes with tango 2
I'm using the Tango 2 in the video
@@GeorgeCooper_LoneWolf did you used any other VTX , Does crossfire nano rx built with receiver and transmitter for audio and video
@@anweshdevkota7044 Yes you can get (Smart audio) for settings setup, as for the VTX that has nothing to do with the receiver
Hi there anyone can help me with the setup please!!! I got cinepro4k with tbs crossfire nano rx installed on it and have a taranis x9lite s with tbs crossfire micro tx and i cant fly((( they are actually binding but in the betaflight the taranis is not seen and the drone doesnt fly???any help is appreciated
(Don't look for Taranis) In betaflight go to the configurations tab. scroll down to
the Receiver tab and select ( Serial based receiver and under that
select CRSF ) hope this helps
@@GeorgeCooper_LoneWolf thx George! But i actually did that! Taranis sees it! But the drone doesnt fly!
@@nomadexperts432 OK then matey let's try something ells. Take the props off goto the motors tab in betaflight plugin a lipo and power up the motors using the onscreen slider. you will have to turn on the switch that says you understand the risk. ( let us know if the motors spin or not )
@@GeorgeCooper_LoneWolf sorry!they spinn now they work! Tbs crossfire rx and tx are binded onneted in between them, but the drone is not accepting commnds from the taranis
@@nomadexperts432Right so the motors spin in the motor tab great. Now go to the receiver tab and check if any stick combined works (do any of the BARS move)