@@MichaelWilliams-ng4kc I don‘t have another battery connection. I Use AS150 connectors. You can plug just one battery for 6s or 2 batteries for 12s :)
@@GrimesRic thanks for all the information , i only have one more question ... what main gear and tail ratio were you running ? Was ith the stock gearing that came in the kit ? I have the 700 v1 and im trying to see if i can do the same thing... just need to know if its stock and i can look it up. Im assuming your running governor around 90% ?
@@MichaelWilliams-ng4kc hey michael, you can easyly do the same thing! the higher main pinion the better. I used the stock pinion (11 teeth). You pretty much have to use 100% flat out curve to have flyable rpms...
Habe schon mehrere Videos von dir angeschaut. Mir gefällt vor allem das weiche und präzise Knüppel-Management, Top 👍
Freut mich sehr! Danke dir :)
Love your style, 6S is great!
Thanks! Yeah 6S in a 700 is fun but there is really absolutely no power especially with my 480kv motor and 11 tooth pinion setup
Wow!! This inspires me to try with my Gaui R5, for a change.! 😁
yeah do it! It‘s fun for 1 or 2 lipos
Nice flight. What pinion and pitch are you running?
Very nice flight! The tail is holding ok at such low rpm?
thanks!! …yeah the tail was okay but keep in mind that i used 115mm tail blades
Was this heli a 12s setup and you just used a single 6s for this flight ,, if so how did you do that ?
I only put a 6S lipo in an it works fine! But it‘s only running at half the headspeed
@@GrimesRic thank you , did you use a jumper for the other battery connection ?
@@MichaelWilliams-ng4kc I don‘t have another battery connection. I Use AS150 connectors. You can plug just one battery for 6s or 2 batteries for 12s :)
@@GrimesRic thanks for all the information , i only have one more question ... what main gear and tail ratio were you running ? Was ith the stock gearing that came in the kit ? I have the 700 v1 and im trying to see if i can do the same thing... just need to know if its stock and i can look it up. Im assuming your running governor around 90% ?
@@MichaelWilliams-ng4kc hey michael, you can easyly do the same thing! the higher main pinion the better. I used the stock pinion (11 teeth). You pretty much have to use 100% flat out curve to have flyable rpms...
So what changes did you have to do to run on a 6s @1050?
Nice flying by the way!
Thank you :) no changes at all... just put i n a 6s lipo and fly
hey it's nice! 12 min of flying with a single 6s is impressive ! if you targetting 3-4min of flying could you push the RPM at 1400-1600 ?
Hey! I don't really know but i think so yeah. 3 to 4 minutes should be possible
So thats a 12s setup on a single 6s , how did you do that ?
This is with 6S 5000mAh?
Yes! But honestly the power ist really weak
@@GrimesRic then 7S should be fine, haha
@@cutefoxRC hm i really only fly 12s also for low rpm :D
More like scale flying .
Nice low rpm flight
wiuh 🤙