How to Replace CV Axle Shaft 2002-2006 Honda CR-V
HTML-код
- Опубликовано: 31 июл 2024
- Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ib/1AACV00044
This video shows you how to install a CV axle shaft on your 2002-2006 Honda CR-V. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 22mm Socket 1aau.to/oa/1AXAA00266
• 36mm Socket 1aau.to/oa/1AAST00006
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Copper Anti-Seize
• Liquid Thread Locker
• Brass Punch
• Drain Pan 1aau.to/oa/1AXAA00320
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Honda CR-V 2002-2006 2nd Generation: • Honda CR-V 2002-2006 2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Amazing video. I know it takes time to place cameras, check & adjust if required, ensure lighting, narrate and edit the video etc. These sorts of videos are immensely helpful in giving us novices the confidence to take on these very do-able jobs at home. Want you to know the efforts are appreciated. Cheers from NZ!
What about the one on the passenger side that doesn't go directly into the transmission but into the intermediate shaft instead?
on point! more 2002-2006 Honda CR-V videos please?
You make it all look so easy. Thanks for that. And you covered every problem spot. Thanks for that too.
Excellent job. Thanks for all the time you put into creating this!
Man that was so much better (simpler) than I was thinking it would be!
Thank for the video.
Expert advice! I will buy parts from you.
Good God!!! You make it look so easy, as taking candy 🍬 from a baby!
Thanks for sharing your knowledge.
God bless you and yours.
thanks for sharing!
Thanks! I had this done to my 2005 crv yestetday. How do I make sure all these steps were followed? It's driving ok.
Aaaahhhhh alright, time to hit up O’Reillys. Big help appreciate the visual representation
If you have an old water hose I would cut about an inch to an inch and a half off of it and use those to put on your lug nuts to keep from marring the threads with the pry bar
UGH Im having a time lining up the strut bolts...Mine looks much tighter in between then this one...any advice?
Where do you refill the axle oil that comes out I can’t find
The plug
Apparently there is a difference between rear axles for a car made in Britain vs Japan. I know mine is made in Japan but is there a difference between the left and right?
If I want to extend the width of my crv, can I replace the axle for a longer one, Instead of using spacers?
Do you think this would translate well to a 2000 CRV?
Does the axel have to be flush with the transmission??
What about fluid replacement?
hey is this Francis ! :)
I replaced my passenger side cv axel. My car shakes about 15 mph and stops at around 25. Anyone know why?
Did you need an alignment after doing this ?
Подскажите пожалуйста, у меня на Honda CR-V 2004 года вибрация при старте и на 60 милях, меня крестовины кардана, шаровые, гранаты. не помогает
Is this similar to 07?
For anyone replacing the axle, its also best to replace the ball joints
all of my bolts were seized, had to grind the 36 mm one off, was very difficult to take the axle out of the rotor , and to place it back in was even harder. took me about 3 hours in total lol
+adam m Thanks for the feedback! 1aau.to/m/Shop-TRQ
The other side isnt that simple! much harder to remove from the half shaft!
Такая коррозия везде, видимо климат так влияет
Drivers side is easy. What about the passenger side?
What I did was I raised the vehicle so that I can have a enough room to swing a small sledgehammer onto the axle and it worked. The pry bar method was no help
Aftermarket axles are going to vibrate
mine a great. got them from napa.