Ceiling Start to Finish Full installation walkthrough Gypsum (framing vents boards) Gipso montavimas
HTML-код
- Опубликовано: 27 апр 2024
- Installing dual layer easy to level metal carcass for two gypsum board layers to be installed with slim deformation gaps around and then installing two players of gbp gypsium plaster board on the ceiling with Edma lift and automatic makita screw gun.
Knauf CD-05 used to hang ceiling construction with fireproof KNAUF DECKENNAGEL 6mm concrete nails, for perimeter used profiles Rigips Ultrastil UD 30/27,
main studs Knauf CD 60/27 0.6mm and Knauf CD-09 to connect CD profile X crossections. Held by Knauf CD-14( up to 20 cm) and CD-05 adjustable anchors. 25mm screws for first layer and then 41mm for second, all screws goes to metal studs.
Using Bosch GLL 3-80 CG professional green line bluetooth enabled laser with handy fit options like Stabila ground to ceiling telescope that I bought for that purpose as extra.
Nail gun model that I used here is MAKITA GN420CSE (drives nails to bricks, plaster, concrete, so can be used to fix perimeter profiles.)
I could also mention high quality Edma tools that I really like, in this video I used Edma stud cutter and board Lifter, this tool can also cut other size drywall studs for other constructions
#drywall #knauf #edma #construction #series #tobecontinued #ceiling #professional #makita #bosch #altrex #sola #stabila #framing #studs #gypsum #plasterboard
Гипс Потолок Гіпсокартон Каркас Резка Профиль أسقف مستعارة سقف معلق أسقف معلقة أسقف ثانوية جبسم بورد Abgehängte Decke Abgehängte Decken Gipskarton Gipsas Gipso Kartono Plokštė Gipso Lubos GKP GKB GKBW Knauf White Karkasas Montavimas Remontas Šešėlis Šešėlinė Rekuperatorius Difuzorius Viniakalė Gipso Montavimas mdeko Pilnas gipso lubu sumontavimas nuo iki 
Хобби
Do you attach the 2nd sheet to 1st sheet or use longer screws which reach the metal studs?
hey, for first layer i use 25mm screws and for second layer 41mm, longer ones yes, and much more of them, when you hit ceiling with fist it sounds very solid without any metal rattle sounds !
and all the screws go into metal studs
@@mdeko-apdaila Thank you!!
@@Visionist feel free to ask any questions, thanks for viewing! I will upload more work on this ceiling later, work around corners, inlayed leds, MUCH work to do alone now.
Why two sheets though?
one reason is better sound insulation, ceiling is stronger, joints will never crack, better for inlayed LED profiles it makes no gap when you cut places for led profiles or inlayed curtain rails that this ceiling will have. as you can see vents are designed for two layer system
gali zinot kokia turi buti maksimali dregme sienu (Cementinis tinkas), kad butu saugu deti gipsa? Dabar rodo 25%
apie 3% skaitosi išdžiūvęs, tai dar gerai padžiovint reiktų pas jus