Full service and fluid change for my 308 GTi!

Поделиться
HTML-код
  • Опубликовано: 9 янв 2025

Комментарии • 29

  • @neilyevomanayre6181
    @neilyevomanayre6181 7 месяцев назад +1

    I'm serving mine for the first time this weekend, and your video is really helpful. Thanks 👍

    • @xiolage
      @xiolage  7 месяцев назад +1

      Glad I can help!

  • @pjohnwilliams6941
    @pjohnwilliams6941 7 месяцев назад +1

    I did mine mate I used millers oil Peugeot spec of course, the air filter is a right pain in the arse. Great vid again 💯

    • @xiolage
      @xiolage  7 месяцев назад +1

      Yeah I’m wanting to change and build a custom induction kit just need to take some measurements! 🤩

    • @pjohnwilliams6941
      @pjohnwilliams6941 7 месяцев назад

      @@xiolage I just replaced with the standard OEM pug filter in the end I was going to get a BMC filter but the mixed reviews put me off haha, too much dirt entering the engine apparently 😂

    • @xiolage
      @xiolage  7 месяцев назад +1

      Let’s see how it fairs on the next oil change. Only one way to find out! 🤪

  • @stuarthumphrey6158
    @stuarthumphrey6158 6 месяцев назад +1

    Really good and helpful video. I've just bought a 308gti so appreciate you posting this. Are there any good forums for help on these cars?

    • @xiolage
      @xiolage  6 месяцев назад +1

      I haven’t really found any bar the Facebook groups (I don’t have Facebook so useless for me) 😂

    • @stuarthumphrey6158
      @stuarthumphrey6158 6 месяцев назад

      @xiolage no worries. In that case, I may be back in the future asking for help!

  • @Adeyspec
    @Adeyspec 7 месяцев назад +1

    is it a 7mm square drive for the gearbox plug? if you find yourself stuck, a interior door handle (from your house) is the same size.

    • @xiolage
      @xiolage  7 месяцев назад +1

      I'm not sure on the size, however sounds about right. Absolute life hack right there.. thanks matey!

  • @eccboy7
    @eccboy7 7 месяцев назад

    Great video mate! Had mine fully valeted with some detailing today. What are your thoughts on replacing the pistons with the stainless steel ones from godspeed? I also keep getting tempted by an ECU remap. There is a garage in Maidstone that do it and the stats are impressive- 263 to 295hp and 340nm to 380nm.

    • @xiolage
      @xiolage  7 месяцев назад

      Thanks mate, I have actually got a video of me replacing the pistons with the god speed ones.. would recommend. Regarding remaps etc, I'm going to upgrade as much hardware as I can before getting it mapped. 💪🏼

  • @BeetaDoopa
    @BeetaDoopa 19 часов назад

    Hi mate. When changing the coolant did you touch any bleed screws? Or did you just topped it up, left it running with cap off and went for a drive? Any issues with doing it that way? Thanks

    • @xiolage
      @xiolage  16 часов назад

      Hi mate, nope just drained and filled left the cap off. When i went for a drive i took the coolant with me, topped it up every 5-10 minutes. 😁

  • @9erner
    @9erner 7 месяцев назад +1

    👍👍👍👍

  • @rodrigozilla2602
    @rodrigozilla2602 7 месяцев назад

    Good work bro!
    And the oil filter?

    • @xiolage
      @xiolage  7 месяцев назад

      Yep, all changed. Struggled to film it as it was so tight between the inlet pipes!

  • @442thebestlineupever
    @442thebestlineupever 3 месяца назад

    Hi mate, did you change the sump washer when doing the service?

    • @xiolage
      @xiolage  3 месяца назад

      Yep!

    • @442thebestlineupever
      @442thebestlineupever 3 месяца назад

      @@xiolage was it a specific washer you got or just a standard one from shop? If you had the size that would be perfect!

    • @xiolage
      @xiolage  3 месяца назад +1

      I don’t have the exact size but the one that euro car parts matches up with the 308 is perfect!

  • @SpiritCrusher89
    @SpiritCrusher89 7 месяцев назад

    Hey man, what kind of oil dipstick is that? The stock one, as you mentioned, is impossible to read, I'd like to replace it

    • @xiolage
      @xiolage  7 месяцев назад

      That one is the stock one, it’s awful 😢

    • @SpiritCrusher89
      @SpiritCrusher89 6 месяцев назад

      @@xiolage the one my GTI BPS has is different and it seems even worse than that... Well, I guess I'll try to find a better one! BTW Nice videos, would have liked to buy a blue GTI but I found a black one, still an amazing car, have fun with it on the track!

    • @xiolage
      @xiolage  6 месяцев назад

      What year is your GTi? Could it be the THP vs PureTech engine difference?

    • @SpiritCrusher89
      @SpiritCrusher89 6 месяцев назад

      @@xiolage mine's 2021, an online search seems to prove my dipstick is the stock one (bloody awful) and yours is probably what the OG owner considered an upgrade, that's why I was asking you... Well, I guess I will have to take it out several times in order to clean the canal a bit before taking an actual reading

    • @xiolage
      @xiolage  6 месяцев назад

      @SpiritCrusher89 Oh right, yep the 2021 has a PureTech engine which i’ve heard is slightly different. Could involve a different dipstick!