How To Wake Up your Paint
HTML-код
- Опубликовано: 7 фев 2025
- How to decontaminate your car paint fast and easy for ceramic coating, wax, sealant & prep
Watch The Dogma & DIY Collab • Detailing with Yvan La...
✅ Pressure Washer : amzn.to/4eLFqNr
✅ Foam Cannon amzn.to/4hRa7TR
✅ DIY Detail Products used in this video : bit.ly/3WyJ7R6 ✅
=======================================================
🔥 Save 5% on CARZILLA Use Code: "DOGMA" ☞ carzilla.ca/?r...
🇺🇸 USA 🇨🇦 Canada FREE Shipping [High End Detailing Products]
=======================================================
🧽 SAVE 10% on DIY DETAIL Products 🇺🇸 bit.ly/3WyJ7R6
Use Code ''DOGMA'' to save $$
=======================================================
🧤 SAVE 10% on ARMOUR DETAIL Supplies 🇺🇸 armourdetailsu...
Use Code ''DOGMA'' to Save $$
=======================================================
🇦🇺Australia Audience SAVE 5% at Detailing Shed use CODE : DOGMA 🇦🇺
bit.ly/4eSowh3
=======================================================
In this video I explain, showcase 3 easy steps to bring back the gloss, paint smoothness and contamination free without harming the paint, wash the paint, decontaminate the car, remove water spots on paint using DIY Detail products.
=======================================================
Favorite Foam Canon : amzn.to/4cPahaI
Favorite Ceramic Coating : carzilla.ca/co...
Favorite microfiber : carzilla.ca/pr...
Favorite Soap : carzilla.ca/pr...
Favorite Iron Remover : carzilla.ca/pr...
Favorite APC : carzilla.ca/pr...
Favorite Pre-wash : carzilla.ca/pr...
Favorite Interior Detailer : carzilla.ca/pr...
Favorite Wash Mitt : carzilla.ca/co...
Favorite Drying Towel : carzilla.ca/co...
Favorite Wheel Cleaner : carzilla.ca/pr...
Favorite Heavy Compound : carzilla.ca/co...
Favorite Polish : carzilla.ca/co...
SUBSCRIBE / @detailing_dogma
Thanks for your support
To reach out, inquiries and info 🔎 detailingdogma@gmail.com
This video is not SPONSORED. Some of the products shown have been sent to me free of charge.
If you complete an order using my affiliate links I might receive a small commission that is reinvested in the channel for content producing.
✅ DIY Detail Products used in this video : bit.ly/3WyJ7R6 ✅
=======================================================
🔥 Save 5% on CARZILLA Use Code: "DOGMA" ☞ carzilla.ca/?ref=dogma
🇺🇸 USA 🇨🇦 Canada FREE Shipping [High End Detailing Products]
=======================================================
🧽 SAVE 10% on DIY DETAIL Products 🇺🇸 bit.ly/3WyJ7R6
Use Code ''DOGMA'' to save $$
=======================================================
Using too many wast mitts is not a crazy thing. It saves a lot of water since you get rid of the other bucket. Especially for those who wash their cars in wash bays like me, this is the best option as it is faster. Besides it is safer compared to two bucket method as you never convey any dirt from panel to the soapy solution in the bucket, wash mitts are always clean. Promote to one bucket with multiple wash mitts instead of two buckets :)
I agree 100%, especially as a business i prefer this way. Promoting a higher priced wash alone it only makes sense to be efficient and do what’s right in the end.
wow, couldn't have explained better! Appreciate you my friend. Cheers
I’ve never tried the multiple mitts method yet but I agree it makes total sense
Using two buckets you essentially reuse the mitt, so it’s efficient .. using one bucket with many mitts you increase speed but to the cost of many mitts. So what if you do a lot of cars a day, how many times would you use the one mitt or every other car another mitt? No method is better or worse its just a trade off and every use case is different
@@ivo7597 Like anything in life its a trade off, but if you're charging for premium washes you want efficiency and less chance of scratching. To get your mitt truly clean its not efficient the amount of time it takes and being mobile you're in a race against time aka the sun. In the end its best you work as quick as you can.
You are becoming one of my favourite handful of detailers that I watch on RUclips. 🇨🇦👍👍
Wow, thanks Eric that means a lot. Appreciate you!
Excellent, excellent video!! Thank you so much for sharing, I really learned a lot and wow, that water spot remover total game changer!
Glad you enjoyed it my friend! Appreciate you taking the time to let me know here. Cheers
Perfect method always made great results! Thank you for sharing this with us,thumbs up from France.👍👍
Merci mon ami! À Bientôt
Well done. I also use multiple wash media and one bucket. Rather be extra safe
Right on! I agree better safe than sorry. MF material holds on the dirt.
Absolutely!!!
“Nothing better than fresh and shiny door jambs”…..made me grin.
mandatory clean door jambs crew ✌
Good Job Francois.
Thank you
Great video. I agree too that the DIY water spot remover is the best. I just revived a coating that hadn’t been maintained in a year using the same method as you.
I too have been using detail popo microfibres, great value for the price.
Hey Steve, glad we like the same stuff! I just wish popo would have something similar to TRC 365 edgeless and their line would be the only thing I use. Cheers my friend!
Recently switch to one bucket always using a fresh washmitt and I really like it !!
Hey Joshua, glad we have the same mindset, makes more sense than 2 bucket 1 mitt regardless! cheers my friend
Great Video, really appreciate you talking about the project while you were actually doing the process. Especially Love your BMW, definitely a Sharp Ride.. 🔥🔥🔥
Hey man thanks for watching, appreciate you! Glad you liked it!
Thanks for sharing Frank.
The clay towel looks interesting, I’ve never used one yet, it’s always been mild clay bars for me so far, if it really doesn’t marr then that’s great.
You see a lot of mixed reports with various clay towels so it’s hard to decide.
I’ve had mixed results with water spot removers, one time I used Carpro but maybe did something wrong, as it completely killed the coating where I applied and nothing since has ever brought it back in that area, it’s flat as a pancake 🤔
Hey Ally thank you for taking the time to write your thoughts and experience!
Honestly I've had marring, marks from every piece of clay or synthetic media before, for some reasons the DIY towel is the 1st that doesn't do that, even with rinseless only as lub. I guess the magic is in the material they use.
I have carpro spotless in my cabinet and unfortunately it never did much for me. They don't advertise it as a tool to bring back coating either 😏. I have to get more DIY mineral deposit remover this stuff is addicting. Cheers!
Love the blue color, nicely done sir 😁👍
Thank you Dave as usual! Yes San Marino Blue is quite something!! cheers
Nice work. I used the DIY decon towel with BH Korrosol (i emailed to make sure it was solvent free) and the experience and results are superb.
Definitely looking to get more DIY stuff.
Thanks again
Thank you.
Hey Pigeon thanks tuning in as usual, glad you did your homework, we should mention to others that some other brands Iron remover destroy clay and synthetic decon media. Thanks for watching my friend!
I get all my TAC SYSTEM products from Carzilla 👍. I also use a Detail POPO 2 liter electric sprayer and I’ve used Detail POPO rinseless wash before.
Good stuff David, thanks for watching, love carzilla!
Thank you for the vid Dogma!
Happy that you like it John, thanks for the usual support!
Salut Franck! Excellent tutoriel pour faire revenir une céramique comme au jour 1 de l'application.
Tes mags sont un enfer à laver, pauvre toi!
J'utilise un spayer avec du rinseless wash pour faire mes overtures de porte mais ta
méthode est excellente
DIY Water Spot Remover is the best, j'attends avec impatience le format gallon
J'avais un vieux Mazda 3 1991 qui était laid comme de la m... et les enfants le
surnommait "bazoupoutpout" comme disait Ti-Brin dans les vieux épisodes de
Passe-Partout, mais je pense que tu es trop jeune pour avoir écouté cette émission!
merci Jean-Marc pour ton support habituel! Oui c'est plus simple de rinseless les doorjambs, c'est une bonne methode effectivement. Le waterspot remover c'est addictif mets-en 😎 passe-partout sa jouait dans mon temps mais j'écoutais deja les films d'action mouhah! Bon week-end JM!
Amazing results my friend, your car is awesome, nice paint 👍 👍. 🤜🤛
Thank you so much Mario 😀 . Mario is a top commenter on the channel thank you brother!
@@Detailing_Dogmayou’re welcome
Can’t wait for the people saying that water spot remover has a beading agent in it to get here!
Yeah I need a gallon like asap.
Mouhaha I thought the same and expect it, wouldn't work well to apply their coating afterwards if it was the case. The product has a clear acid smell, similar to other waterspot remover but I tested carpro spotless wouldnt do the same but has definitive ''in the family'' kind of scent.
Cheers brother thanks for watching as usual.
Gallons on the way
😂 avec son bazou ... great video , very detailed , lache pas 👍
merci mon ami, j'apprecie tes encouragements et merci de prendre le temps de le faire! Cheers
Lets go Frank, just as I was looking to decon my car as well! 👌🏻 I'm as crazy as you when it comes to washing with a thousend mitts, I even fold the cuff in on itself so it won't scratch or get in the way #tip
yeah right on Rowland! We're not alone brother, on really curvy panel like the bumpers and trunk I like using it as mitt from time to time. Good tip, Cheers man
Dear Dogma, to me it makes no sense to spray a protectant on the wheels before you wash your car? I would wait until the final rinse of the entire car? Does that makes sense to you?
Hey hartland, I always did it this way because i'm not gonna use the same product for the paint in this particular scenario and I wanted the wheels done right away. I dont think it would change much of anything to apply the wheel sealant before or after the paint wash. Both methods would yield the same result imo. Cheers and thanks for watching
@@Detailing_Dogma Thanks for your reply! Whatever works for you, Do It!
thanks brother! @@hartlanddetailer5670
Nice vid! At this point, roughly how long had the ceramic coating been installed on the BMW? A couple weeks ago I installed DIY Detail "The Stack". Absolutely love it!
Hey viper, thanks for tuning in once again! I had installed Gyeon CanCoat in July 2023 if im not mistaken, but constantly topped it a variety of products trying to get it going after winter. Glad you love the stack, you 8 +3 or the 5+ 3?
@@Detailing_Dogma I put on the 8+3 "Big Stack" and not looking back! 😂👍
amazing@@viperrcr
Hi François, which microfibre towels are best to apply a drying aid? Thanks
Hey Yzer thanks for watching as usual, check out my MF towel video here, I have top 3 towel, 1 of them does everything ruclips.net/video/FqPIHFDGbKY/видео.html
Merci, do you think the Armour products are better than DIY as per most YT detailers are saying?
Yay!
May i ask where you gor the cargo pants?
Greetings from Belgium !!
Thanks for tuning in and taking the time to leave a comment, love reading it. Cheers
I Subscribed 👍
Appreciate you my friend! Glad to have you
First!!!
you got it brother!
Great job Frank!
@diydetailofficial thank you 🤙
Sir just came home from Quebec we visited the old city. Super great we were impressed specially the oldest hotel.🙏🫡❤️
Excellent John, happy that you liked Quebec! Beautiful area and excellent food. Thanks for taking the time to let me know. Cheers