And SOOO glad the new Typhon has a center diff. May have to sale my previous Typhon to get one. Tired of it sounding like it's whining. 😁 And tired of slippers. I mean I wear slippers but my RCs need to run diff - erent steel toed boots. 🤙
SWEET!! Now you got me wanting to get one. I got a Mamba 8s ESC laying around so I’ll definitely pick up a 2-3s Typhon and switch out that ESC and stick the 8s Mamba ESC in it. I will do a little grinding to just see if I can fit a slightly bigger pinion gear in it to get closer to that 100mph? Thank you brother for another awesome video.👍👍💯💯💯👌👌🙂
It's a solid car to do 100 with! Already did the grinding, can't go any further with the gear that's currently in there. Have to somehow drop the center diff out and run a smaller diff. Except the bearings are larger than a standard 2-3s housing. So it'll be difficult!
Awesome !👏 thanks for doing this . I wouldn’t have been able to not to do the same and prefer the RC s modded OP like 4s combo for 3s , 6s combo for 4s and 6s with max6 combo type stuff . I’m getting my first buggy soon hopefully . I need to try the racing and speed side of RC
Need a little advice please, i want to run the stock set up, but i want to reach speeds over 50 mph what size pinion gear should i run? It comes with a stock 16 pinion gear.
@InnovationRC ok cool, man thanks. I came to check out the RC store but Jay said you were no longer there. I wish I could've met you in person man. Thanks again 👍
Hey brother where did u get the tie rod ends on vision front and back especially the front because I removed my springs and I don’t wanna mess with the dwrop screw? I kno I didn’t spell that rite however I don’t wanna mess with it I don’t see the cents in bending parts of the driveline from doing that on to the frame 😂so this is why I wanted to ask u because I wokld like to do the same 🎉nice video by the way
@InnovationRC if it does, this can go beyond 100mph on 4S. drivetrain seems sturdy and because the chassis is light, it might hold together and become feasible.
Dang that is Fast! You are really putting out the content. Great stuff!
I appreciate that! Doing the best I can
That thing is MOVING! 🔥🔥🔥
Thank you for sharing a good video with a nice car! 💯👍👍
See I knew you was gonna show the assumeness of this rig you never disappoint great stuff
And SOOO glad the new Typhon has a center diff. May have to sale my previous Typhon to get one. Tired of it sounding like it's whining. 😁 And tired of slippers. I mean I wear slippers but my RCs need to run diff - erent steel toed boots. 🤙
Never have to worry about slipper clutch issues ever again with this one!
The only time when "i think its in there" is not frowned upon😁 good run mate👍🏻
Absolutely agreed 😂
Wow! That’s fast for that small size. Excellent 😊
Good job getting it to 92 mph!
Thanks on that!
SWEET!! Now you got me wanting to get one. I got a Mamba 8s ESC laying around so I’ll definitely pick up a 2-3s Typhon and switch out that ESC and stick the 8s Mamba ESC in it. I will do a little grinding to just see if I can fit a slightly bigger pinion gear in it to get closer to that 100mph? Thank you brother for another awesome video.👍👍💯💯💯👌👌🙂
It's a solid car to do 100 with!
Already did the grinding, can't go any further with the gear that's currently in there. Have to somehow drop the center diff out and run a smaller diff. Except the bearings are larger than a standard 2-3s housing. So it'll be difficult!
I think these drones swarming around may have taken your hat. Time for a foil one. 🤣
The Gold standard!
WOW 🤯 Insane passes 🙌🏽🙌🏽💪🏽💪🏽🫡🫡🔥🔥🔥
Thank you! 🙏
I ran 6s on stock motor over 100mph on the v3.
Super Cool
"We can fit a 6S in there?!?" omg pls dont i love the Typhon so much and i dont wanna see one turn into a rolling ball of lipo battery fire lmao.
Nice, dude!
keep pushing those limits bro 🚀🚀💯💯
Thank you!
Is that the MIKE TYPHON buggy 🤣🤣🤣 .
What pinion and spur gear did you use?
Great Bro
That's super impressive
Thanks I appreciate that
How do you wire the motor into the esc bullet connectors that looks like a perfect set up for me thanks
A little bit of soldering. Just solder the ends on the stock motor to 6.5mm bullets that go to the esc
Can u show how u got the big pinion gear in it what is the spur gear size as well pls thank u
Wow! Thats faster than my felony🤣
A stock felony yes, but you have the ability to fly right past that even then so!
Dammnnn Kidd!!
Sheeeeeeesh!
Cough, cough how you got this already I've had to pre order can't get until December ❤
Yessssir 💪🏾💯
Coach! 🙏💪
Awesome !👏 thanks for doing this . I wouldn’t have been able to not to do the same and prefer the RC s modded OP like 4s combo for 3s , 6s combo for 4s and 6s with max6 combo type stuff . I’m getting my first buggy soon hopefully . I need to try the racing and speed side of RC
Droop screws, taller foam tires, and ice packs between runs for 100+?
223s... 322 backwards. Funny stuff. Good old Skull & Bones number
Wow, I'm totally impressed. Now start playing with timing and lower it if you haven't already, but I bet you can get 100 mph. Also, hv lipos
Does it not have AVC?
What gear configuration is in that Typhon?
Any way you could do an ESC fan install and diff removal and install for us new people?
Just got s223 v4. Please
Try It on 6s, also I have seen a custom center shaft and you can run any mod 1 gears
Need a little advice please, i want to run the stock set up, but i want to reach speeds over 50 mph what size pinion gear should i run? It comes with a stock 16 pinion gear.
I'd go with a 20t pinion gear at least. Then the sky is the limit!
@InnovationRC ok cool, man thanks. I came to check out the RC store but Jay said you were no longer there. I wish I could've met you in person man. Thanks again 👍
I'm glad you did that 46 just isn't fast enough
I agree!
Hey brother where did u get the tie rod ends on vision front and back especially the front because I removed my springs and I don’t wanna mess with the dwrop screw? I kno I didn’t spell that rite however I don’t wanna mess with it I don’t see the cents in bending parts of the driveline from doing that on to the frame 😂so this is why I wanted to ask u because I wokld like to do the same 🎉nice video by the way
You can use any rod ends. Traxxas links, Arrma links. Etc just adjust them to your liking. I'd get a short and a long pair of rod ends
@@InnovationRC thanks a lot.
Where's the Vendetta reissue? We are all waiting!
Nice runs man, what wheels did you use?
GRP belted tires
Will the motormount fit a 4274 motor?
It might. Going to try out some fitting options next week
@InnovationRC if it does, this can go beyond 100mph on 4S. drivetrain seems sturdy and because the chassis is light, it might hold together and become feasible.
5s time
I agree!
Put a mod1 spool in
I need to find one
@InnovationRC can you not make one like on the first car it's quite simple
You did say something was coming . Let's rip the new creation & oohhhh my hat lol ( telecomandos intro)
Haha yessir!
Run that motor on 6s
100mph please. 🚙 🚙
Next Saturdays video! I'll try my best! Already maxed out with gearing
I have the blx typhoon grom that is not a grom to big
I never said it was a Grom
@ I never said what it was and u know calling it a 223 come on man really
Colour scheme on these are bad.
I agree!
@ new wheels would look good on the old typhon though