This is a real work of art, if you need to restore tail light of a collectible car or motorcycle, this is the Master to do it, technic and quality result with no doubt. Congratulations for the excelent video. Greetings from Brazil.
@@stankozan на видео стопы от япошек 70-80х годов, контрактные запчасти на них даже в России можно приобрести, а уж судя по прищуру мужика на видео, у него прям за домом на разборе такие же можно купить.
For newer cars I don't think this would be economical it's very labour intensive and a new replacement part would be cheaper, but this guy could make a fortune repairing lights for older classic cars for which replacement parts are often very expensive and difficult or even impossible to find.
Admiro pessoas que reparam as coisas. Mas este homem tem uma habilidade sensacional, além de gostar daquilo que faz. Só posso dizer meus parabéns pelo belo trabalho!
Эпоксидка и рядом не стоит с изделиями из поликарбоната. Мы на производстве 3 года пытались сделать копию стекла от фары. Бюджет был у нас грубо говоря не ограничен. Материалы подбирал преподаватель сопромата из МГУ. На солнце эпоксидка нагреется и станет мягкой, будет произвольно деформироваться. Со временем, любая эпоксидка желтеет. Та из которой льют столы держится 5-7лет но потом тоже желтеет.
@@povorotnetuda2019 а то что он использовал уф-при затвердевании? Нет... У них показатели теже? Зы в данном случае думаю это раритет на гаражное хранение, так что главное вид. Под лаком и в окраске вряд ли быстро или вообще заметна будет желтизна. А вот про столы заливают.. Да. Как не колеруй это смешение цвета будет и полировка не поможет...
Fine skills like these are passed down through the generations from father to son. His father taught him the ways of the 3d printing pen, silicones and resin, ancient techniques at its finest. On a serious note though, nice work from planning to execution, patience is key (and the appropriate tools).
Se volvio un maestro, muy bien , aprendi a arreglar de todo creo que en el fondo queria arreglar lo que no comprendía perp con los años me sievio para sobrevivir, Gracias
I could probably not pick a few small things but, was clever and pretty damn good. I even picked up a few tricks a d saw a few of my own ideas that I've never tried done here as well. hats off.
Really nice work. It takes so long time that suitable only for those parts which can not buy any more but today those parts can be made by using 3D scanner and plastic printer. This way might be made stronger parts
i must say today it is really important to know how to repair things, and this video show once more to know your skills and knowledge. Why always we have to buy everything new. For this i pay for the service and work for what he have done. Very nice and satisfying.
A lot of engineering goes into light assemblies. They must diffuse light evenly from the bulbs, they must breath but not leak and work in extreme temperatures. He's restoring these functions.
Конечный результат небезупречен - объективно, есть косяки. Но, учитывая основательность процесса восстановления и сколько сил и времени человек потратил на это, критиковать работу уже не хочется. Молодец, одним словом!
Подошли с умом, вместо того чтоб купить новую или бу фару, решили востоновить и сломать другую целую фару, логига на 100% работает, давай говорит востановим одну фару, а другую сломаем.
Final repair part looks better than original. Kudos and lots of respect for the passion and knowledge you have, Sir.
Если необходимо востановить ретродеталь, то да почёт и уважение. Но если существующее авто, то проще купить новый фонарь.
Предполагаю, что это и рассчитано на редкие детали, либо на те, что стоят как чугунный мост!)
Это скорее, копирование.
Дорогостоящее, довольно- -таки
@@user-jt7kf1uw6q Я соглашусь с вами. Если доставка и цена превышают предел рентабельности, лучше обратиться к такому профессионалу, как в этом видео.
Просто потрясающе. Приятно знать, что в наше время кто-то занимается такими вещами.
Рентабельность...
@@user-yu5by7nb8r Реставрация...
This is a real work of art, if you need to restore tail light of a collectible car or motorcycle, this is the Master to do it, technic and quality result with no doubt. Congratulations for the excelent video. Greetings from Brazil.
Достойно уважения! 👍
A very skilled and well educated master to such abilities. He certainly can duplicate any type lens assembly for most any vehicle it seems. Thumbs Up!
The skills of this gentleman are truly sick. Very well done, _very_ impressive.
Don't forget about instruments, with out of them he can't do anything
@@martrus1659no shit sherlock
It's great to see such a fine craftsman at work. Many of these skills have been lost over time. Thanks for sharing them with us.
@@repairman8299can I send you a taillight to repair? I'm from United States and have I taillight that I can not find here that needs repair.
Вот уж действительно, воскрешение и клонирование!..... Браво!
This man is not a man, he is a God, a creator, that skill, knowledge and technique, have my respect, if only I could be his disciple.....
@moshe7019should with small "g"
@moshe7019only believers can blaspheme. We, who don't give a thought to illusionary magical beings are immune.
God created him
This blew away my head, so incredible skill! I just wish he showed the original part and his repaired part installed on the car.
Никогда бы не подумал что руками можно такое сделать! Awesome! Arigato Godzaimasu!
Mestre dos magos! Sr. Miyagi dos faróis. Parabéns pelo trabalho inacreditável. ARIGATÔ!
FICO IMAGINANDO QUANTO ESSE JAPA COBRA PRA FAZER UMA OBRA DE ARTE DESSAS,INCRIVEL👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Восхитительная работа!!! Спасибо мастеру!!!
Потрясающе и завораживающе! Вот это результат!
Честно, и не думал, что можно восстановить так фонари, или же сделать копию. Браво)))
инструмент и материалы обойдутся дороже, чем заказать новую
@@Alexander-gb6oz согласен. Но при условии, что новые есть))
@@stankozan на видео стопы от япошек 70-80х годов, контрактные запчасти на них даже в России можно приобрести, а уж судя по прищуру мужика на видео, у него прям за домом на разборе такие же можно купить.
@@Alexander-gb6oz а вдруг это бурят 🤣
That XB tail light assembly came up awesome! Great work.
I thought it was an XB tail light too. The prices and rarity are probably at the stage where this is a good alternative.
His work is better than what comes out of the factory! Unbelievable craftsmanship and skill.
That tail light didn't com from the factory tho.
Поразительная работа! Пробовал все эти техники, но результатом не остался доволен. А здесь результат потрясающий!
Материалы скорее всего важны в первую очередь
@@andreyd.2138и голова с руками.
You, Sir, have some serious passion, patience, and SKILLS !! Awesome work !!
Can't believe the level of craftsmanship of this man. Amazing. Great job💪🏼
Браво, великолепно!
я тоже так могу, просто не хочу))
@@musbg3461ха три раза.
With this level of craftsmanship, he help owners of rare cars with unobtainium lens sleep well at night.
Such patience and attention to detail - amazing!
I'm floored. Had no idea this level of restoration was even possible.
What patients he has lots of skill hope he charges good he is worth the money ..... I think it's easier to buy one but this Mas has talent 👍
For newer cars I don't think this would be economical it's very labour intensive and a new replacement part would be cheaper, but this guy could make a fortune repairing lights for older classic cars for which replacement parts are often very expensive and difficult or even impossible to find.
Дешевле купить фару для моих жигулей на разборке, чем восстанавливать у такого гуру мастера! 😊
Лучшее восстановление что я видел! Спасибо!
Гандоны он не штопает?
но есть еще раритетные ламбо, для которых нет производств и разборок
Просто шикарно, залип с первой минуты!
Admiro pessoas que reparam as coisas. Mas este homem tem uma habilidade sensacional, além de gostar daquilo que faz. Só posso dizer meus parabéns pelo belo trabalho!
This man is the tail lights Sensei 🥋👍🏻
This was the most intense taillight restoration I’ve ever seen in my life!!!!! Lol
That must be one hella rare tail light! Dude is a master craftsman!!
Hella ! .... I see what you did there :)
Hands up! This man is the master of plastics. 🙌👏👏👏
すげーな。
クリアのカラーは少しの深さ(厚み)で色が変わってしまうので、ここまで均等に同じ色にするのは不可能に違いと思う。
This level of craftsmanship does not exist in the US anymore. Incredible!
Pasión, paciencia, y amor por lo que sabe hacer!!!! Rayos increíble!!!!
A man makes with his own hands better than some car factories, respect for the master.👍
Совершенство, золотые руки. Подозревал, что кто-нибудь этим занимается, но чтоб такой уровень исполнения... Неожиданно и предельно возможно.
Эпоксидка и рядом не стоит с изделиями из поликарбоната. Мы на производстве 3 года пытались сделать копию стекла от фары. Бюджет был у нас грубо говоря не ограничен. Материалы подбирал преподаватель сопромата из МГУ. На солнце эпоксидка нагреется и станет мягкой, будет произвольно деформироваться. Со временем, любая эпоксидка желтеет. Та из которой льют столы держится 5-7лет но потом тоже желтеет.
@@povorotnetuda2019 а то что он использовал уф-при затвердевании? Нет... У них показатели теже? Зы в данном случае думаю это раритет на гаражное хранение, так что главное вид. Под лаком и в окраске вряд ли быстро или вообще заметна будет желтизна.
А вот про столы заливают.. Да. Как не колеруй это смешение цвета будет и полировка не поможет...
Nossa!! dimais o mestre dos mestre da restauração é um prazer ver sues videos
Absolutely superb craftsmanship, your knowledge and skills are outstanding.
I hope you can train others to pass them on.
Verdadeira obra de arte !!!!
Parabens pelo pelo trabalho!!!
Кропотливая, просто ювелирная работа мастера!!
That was great !! Well almost as good as what I would have done LOL. I wouldn't even know where to start !! THANKS FOR THE POST SIR !!
Genio de genios, no he visto nada igual en este canal, abrazo fuerte mi sensei
Вот это мастер!) 👍
When duplicate is better than the original. Amazing work
Always liked the Mustang tail lights with the amber blinkers. Nice work
Fine skills like these are passed down through the generations from father to son.
His father taught him the ways of the 3d printing pen, silicones and resin, ancient techniques at its finest.
On a serious note though, nice work from planning to execution, patience is key (and the appropriate tools).
Se volvio un maestro, muy bien , aprendi a arreglar de todo creo que en el fondo queria arreglar lo que no comprendía perp con los años me sievio para sobrevivir, Gracias
Truly insane! Where does one even begin to learn all these really...and passion can truly be seen from the work and effort!
At this point I wouldn't even want oem anymore, I'd be sending in completely custom designs 😁. Amazing. Looks way better than original
Super incredible craftsmanship and tech!
It must be only for super rare and expensive cars, though.
The best light restore process that I have ever seen, respect!!!
I could probably not pick a few small things but, was clever and pretty damn good. I even picked up a few tricks a d saw a few of my own ideas that I've never tried done here as well. hats off.
A true craftsman. Great job. Thank you.
Que trabalho incrível parabéns.
Really nice work. It takes so long time that suitable only for those parts which can not buy any more but today those parts can be made by using 3D scanner and plastic printer. This way might be made stronger parts
Zajebista robota 😁 Szacunek 👍
i must say today it is really important to know how to repair things, and this video show once more to know your skills and knowledge. Why always we have to buy everything new. For this i pay for the service and work for what he have done. Very nice and satisfying.
That is next-level recycling! Tremendous skill!
Потрясающая работа. Молодцы Японцы, есть чему поучится.
A lot of engineering goes into light assemblies. They must diffuse light evenly from the bulbs, they must breath but not leak and work in extreme temperatures. He's restoring these functions.
¡Sorprendente!
Es usted un mago y maestro en paciencia y dedicación.
Вот он кто тюнинг делает. Уважуха дядьке 👍
Восхитительно!
What is the address of your playce ,i want to send you lights to repair ..thank you ❤️🙋♂️
É o verdadeiro mestre ninja das reparações! Trabalho incrível! Parabéns!!!
I could watch this man perform his professional job for hours
Конечный результат небезупречен - объективно, есть косяки.
Но, учитывая основательность процесса восстановления и сколько сил и времени человек потратил на это, критиковать работу уже не хочется.
Молодец, одним словом!
Semplicemente bravissimo 👏👏👏👏💯 complimenti maestro.
It's such a pleasure watching skilled craft master work with passion. 👍👍👍
Incredible craftsmanship. Thank you for sharing!
Великолепно! Мастер дела своего.
Excelente trabajo maestro! 👏🏿😍👏🏿😍👏🏿😍👏🏿😍👏🏿😍👏🏿😍👏🏿😍👏🏿😍 Mis respetos para usted!
This is absolutely incredible. Mastery of a very unique skill. I wonder if he makes custom lenses?
Perfect, excellent professional restorer, congratulations, unparalleled
Simply said: Genius.
Bravo majstore 👍👌Respekt ❤ !
Отличная работа. Спаситель ретро автомобилей!!!
Просто невероятно восхитительно! Поклон мужику,мастер своего дела.
red paint what paint
Et toutes mes félicitations pour ce travail remarquable ❤congratulations ❤
Esse cara é um artista da velha guarda, parabéns
This is absolutely astonishing. What a superb craftsmanship.
Я такого подхода к восстановлению никогда не видел. Это какой-то уровень бога! Молотками для Тора он наверное по совместительству занимается.)
Красавчик! Смотрел видео не отрываясь! Никогда не видел подобного! Просто супер Мастер💪👍
Dear with out such sophisticated tools, skills n experience its not possible to repair with this quality.Respect to your skills n appreciated.
Nice job my friend you make this job for everyone ! My cressida have tailligths decolored
Брюс Ли по восстановлению оптики фар автомобиля . Профессионал.
Авто ювелир, молодец, терпение и мастерство отличные
Unbelivable craftmanship, respect and congratiolations...
So, thank you for fixing my taillights.
$3,500 dollars ?
That sounds reasonable...
Great work Of art and enormous skill, great only for parts that are discontinued and can't be sourced, otherwise it's too much time and effort
А знает кто он заливает это все акриловым пластиком или это эпоксидная смола ?
Подошли с умом, вместо того чтоб купить новую или бу фару, решили востоновить и сломать другую целую фару, логига на 100% работает, давай говорит востановим одну фару, а другую сломаем.
That is insane! top class work :D
Nice workmanship but it would cost me less to replace it than it would to buy the equipment and spend all that time doing it.
With what he is mixing the powder at minuto 2:11? i need to know plz
Great job, real artist, Amazing wooow
That's an amazing result, dude's a master, if I tried this I'd have to buy a new car
Очень красиво и класно 👍👍👍👍👏👏👏👏👏🙋♂️🙋♂️🙋♂️🙋♂️
Cara é um artista um mago da alquimia dos elementos..parabéns