Y'all have to admit that this is a very talented man. It is really hard in some countries to get stuff that we could easily order online here in the US. I believe this man should be working at Honda or any other car monster company.
hocam bu nasıl bir başarıdır ya bence yavaştan fabrika kurman lazım yurtdışına ihracat bile yaparsın videolarının dünyanın dört bir yanından gelen ilgisini hep beraber görmekteyiz...
This process is convoluted, you are highly skilled though, cant even begin such a project despite all the wonderful instructions and music, yes, I dont feel like it.
Тоже обратил внимание на то что, блоки светодиодов , в случае деградации последних, заменить будет не просто. Вот если бы была возможность в случае чп, просто сняв фару, хотябы сзади подобраться к светикам, не вскрывая всю фару.
I've customized street bike tail lights with a similar effect. By taping off the design I wanted (on the inside of the tail light lense, and painting it (on the inside only) with flat black paint. You keep the smooth shiny red surface on the exterior of the lenses, but get the design you want illuminated. I.E., I made two circles, side by side on a rectangle light, instead of a rectangle it illuminated as two red circles. I think I did a series of horizontal lines on a square lense once, kind of a strobe effect. Taping can be meticulous sometimes on tail lights because of the diamond shaped texture on the inside but it's not hard. I think I pushed down some tiny areas with a toothpick and got clean sharp lines on finished product. Some are just smooth, with no diamond texture. So those are easy to tape off on the inside, and produce fine lines when painted.
Eu não falo a língua desse rapaz so sei que vejo videos dele sempre que ele posta algo top assim aliás todos feitos por ele ate hoje são todos uma beleza parabéns muito talentoso BH MG
Cara o trabalho do profissinal que faz essa parada tem que ser muito bem valorizado, que baita trabalho que tem. Ficou muito bacana o projeto, parabéns
Sanatkar adamın hali başka. Hayranlıkla izledim böyle adamlardan çok kalmadı ülkede alıştık çin mallarına helal olsun. İlk görünce yabancı biri sandım. Tebrik ederim
Hocam elinize sağlık bu işin vakkosu sizsiniz. Şimdi, Allah Korusun ama kaza durumunda araba önemli değilde, ya stoplara bişey olursa diye aklımdan geçirmeden edemedim.
@@emreabiniz01 beyaz katılarak fiberin araya döküldüğü madde, yani ışık veren kısım pleksi tarzında oldu. Fiberin ne olduğunu biliyorum. Zamanında Irak a giden kamyonların kasasında mazot getirdiği büyük depolar fiberden yapılırdı. Yani sene 90 lardan beri fiberin ne olduğunu biliyorum 😉
@@emreabiniz01 reçine zaten kardeşim. Malzemeden ziyade, güzel bir akılla pleksi tarzında bir iş çıkarması güzel olan. Ben o noktaya değinmek istedim. Pleksi de kesip koyabilirdi ama sıfırdan imal etti. O yanı güzel yani
I always thought the major area Honda lacks is in the style department and this proves it. A world of difference due to lighting and this ultra technical lighting actually compliments the design queue of the Civic. Well done on the design! Honda engines, design and reliability are Fantastic but due to lacking style, other Trendy manufacturers like Hyundai, Kia, MG, European brands etc getting more recognition and increasing market share.
Put the parts’ quality aside, use of IC socket as well as no applying anti-damp coating to PCB and soldering points would shorten the lifespan of all parts, as those lamp modules are designed to allow moisture staying in and get evaporated repeatedly. About the craftsmanship, it is pretty awesome.
Amazing...this man should be in bmw... Mercedes...jaguar.... Company as a chief designer for such tail lights....these companies deserves such talented and dynamic man ❤️🔥
...somewhere in the U.S this idea will be stolen, imitated, eventually patented and raped with investor's then sold off to the highest bider like everything and everyone else. When in doubt you have a great and marvellous idea perhaps it'll be wiser to keep it for personal use avoiding the tube market. Overall the light is cool.
In Modern Living Rooms Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
@@hansblackbullet2737, você diz esses LEDs que aparecem aos 5:50 do vídeo? Se sim, é conhecido como "Power Led", a parte preta no caso conhecido como "dissipador estrela". Podem ser comprados separadamente ou até mesmo conjunto que venha ambos. Só pesquisar por esses dois nomes mencionados que você acha. O autor do vídeo é da Turquia. Gente boa demais ele.
In an instant I love your channel lol. Man.. you deserve more subscribers and viewers. Neat customizations, love them! You just earned yourself a new sub 🤙🏼
Соглашусь, что прикольно, но очень ненадежно, как выглядит, так и в эксплуотации. Еще с сигналами торможения намудренно, очень маленькие и невнятные. В России с такими, точно пришлют сзади))))
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Y'all have to admit that this is a very talented man. It is really hard in some countries to get stuff that we could easily order online here in the US. I believe this man should be working at Honda or any other car monster company.
That’s one thing I told myself when the video got to 3:0 minutes ...mans probably working for Honda or is a former employee of a major brand
Indeed. Its some kind of art.
What will be the cost for Honda wrv
Plz share the details
You realise that you order them from these vary same countries, do you?
Ps: that's why people make jokes of americans brain capabilities. 😂😂
Ortaya çıkan bu iş gerçek bir ustalık ve sanat .Övgüyü fazlasıyla hakediyorsunuz.Tebrik ederim.
This is not a simple tail light modification job. It is an authentic work of art! Chapeau!
Vallahi helala olsun, bu işi ticaret maksadıyla bile yapıyorsanız , büyük emek var .
Impressionante o trabalho que você faz. Uma verdadeira mágica! Parabéns.
Vdd tem um desse branco fiquei loco por essa lanterna q ficou top das galáxias
Queria saber como que faz pra contratar seu trabalho, muito bom 😊
Aloooo @Carros de Baiano
@@wesley9966 sai dai o fico tesao pra caraio
Ficou Top viu!! Mas ele poderia ter dado uma escurecida nas da tampa tbm
Dünyaca ünlü nam salmış youtuberlar kadar kaliteli içerik üreten sayılı Türkler densin. Ellerine sağlık yolun açık olsun...
@SEALKING 69 turkish
hocam bu nasıl bir başarıdır ya bence yavaştan fabrika kurman lazım yurtdışına ihracat bile yaparsın videolarının dünyanın dört bir yanından gelen ilgisini hep beraber görmekteyiz...
Amazing work! When I 1st saw the lights I thought it looked good but after watching the amount of work and precision, I'm floored. Nice!
Don't go cheap on the LED's when you're going through this much work! Very nicely done!
1.00 leds should do the trick
bunu Dünya da yapan sayılı insanlardan biri olduğunu düşünecek olursak çok gurur verici:)
@@azccarstyle selamın aleyküm ustam 2013 symbol joy araca kaç tl yaparsınız bu islemi
@@azccarstyle Where do you live?
@@azccarstyle ne kadara mal olur ve bir oğul yaşar
This process is convoluted, you are highly skilled though, cant even begin such a project despite all the wonderful instructions and music, yes, I dont feel like it.
Просмотрел на одном дыхании, видос супер, работа проделана колоссальная, всё сделано грамотно и аккуратно! Респект!
Следующий хозяин будет приятно удивлён, особенно когда захочет поменять перегоревшую лампочку
Тоже обратил внимание на то что, блоки светодиодов , в случае деградации последних, заменить будет не просто. Вот если бы была возможность в случае чп, просто сняв фару, хотябы сзади подобраться к светикам, не вскрывая всю фару.
I've customized street bike tail lights with a similar effect. By taping off the design I wanted (on the inside of the tail light lense, and painting it (on the inside only) with flat black paint. You keep the smooth shiny red surface on the exterior of the lenses, but get the design you want illuminated. I.E., I made two circles, side by side on a rectangle light, instead of a rectangle it illuminated as two red circles. I think I did a series of horizontal lines on a square lense once, kind of a strobe effect. Taping can be meticulous sometimes on tail lights because of the diamond shaped texture on the inside but it's not hard. I think I pushed down some tiny areas with a toothpick and got clean sharp lines on finished product. Some are just smooth, with no diamond texture. So those are easy to tape off on the inside, and produce fine lines when painted.
Did you ask your mum first?
Eu não falo a língua desse rapaz so sei que vejo videos dele sempre que ele posta algo top assim aliás todos feitos por ele ate hoje são todos uma beleza parabéns muito talentoso BH MG
boa noite de onde ele é?
Cladio vital eu não sei acho que seja americano mas não tenho certeza alguma BH MG
@@messiaslino7861 valeu meu Amigo
Ele é turco
Ola. Vc esse turco é muito bom no que faz ele desmancha tudo e refaz com mais quelidade e beleza muito bom BH MG
Siz video atınca mutlu oluyorum Online dersten çıkıp geldim 😂
@@azccarstyle hocam üretim yapıyor musunuz sipariş verebilir miyiz ?
Cara o trabalho do profissinal que faz essa parada tem que ser muito bem valorizado, que baita trabalho que tem. Ficou muito bacana o projeto, parabéns
This guy started from pro level and ended up in some insanely super non word describing mode. Great job.
🇹🇷🇹🇷
You've got some serious skills mate, congratulations just awesome!
Sanatkar adamın hali başka. Hayranlıkla izledim böyle adamlardan çok kalmadı ülkede alıştık çin mallarına helal olsun. İlk görünce yabancı biri sandım. Tebrik ederim
Plakadan çıkardım bende türk olduğunu 😂😂
@@TykheFraude aynen :)
Plaka ya kadar anlamadım.
Всегда поражаюсь этой работе. Превосходно! 👏👏
All i can do is watch, can't copy can't do nothing man. This is another level😱😱😱
That's very impressive work, well done. You have alot more patience than what i could ever have for my creations lol
this guy should get a job at a big car dealership as a light designer!
He may have left big company to do this on his own, and make videos to show us.
Honda mühendisleri getir götürünü bile yapamaz ustam bu nasıl bir sanat maşallah
One of the most satisfying things I have watched on RUclips for a long time . Well done !
Arkadaş, ne el emeği var bu işte, helal olsun gerçekten.
Hocam elinize sağlık bu işin vakkosu sizsiniz. Şimdi, Allah Korusun ama kaza durumunda araba önemli değilde, ya stoplara bişey olursa diye aklımdan geçirmeden edemedim.
The black lines in the middle of the tail light was unnecessary. All of a sudden. The crafting skills and the work is outstanding! Great job! 👍
Um trabalho desse não tem dinheiro q pague 😍😍👏🏻👏🏻, Parabéns amigo é uma obra de arte oq vc faz 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Yeaahhh adam aştı yemin ediyorum. Sıfırdan pleksi yaptı ya la 😂😂 helal olsun abi eline sağlık valla on numara el emeği 👏👏👏
Pleksi derken? Fiber olmasın o?
@@emreabiniz01 beyaz katılarak fiberin araya döküldüğü madde, yani ışık veren kısım pleksi tarzında oldu. Fiberin ne olduğunu biliyorum. Zamanında Irak a giden kamyonların kasasında mazot getirdiği büyük depolar fiberden yapılırdı. Yani sene 90 lardan beri fiberin ne olduğunu biliyorum 😉
@@dervisdmd4565 o döktüğü beyaz şeyde epoksi reçine diye biliyorum
@@emreabiniz01 reçine zaten kardeşim. Malzemeden ziyade, güzel bir akılla pleksi tarzında bir iş çıkarması güzel olan. Ben o noktaya değinmek istedim. Pleksi de kesip koyabilirdi ama sıfırdan imal etti. O yanı güzel yani
Wow that's cool but when the LED dies it will be a mission to replace
lol true
Facts
Bom dia
@uuzhp8 1:02 1:04 1:07
Bom dia
505
Senin yaptiğin stop sa bu arabalarin üstündekiler ne resmen hayat veriyorsun mükemmel bir çalişma ince işçilik muazzam
Başkan ne uğraştın valla helal olsun. İngilizce eklemen sayesinde çok fazla izleyen de olmuş. Eline sağlık :D
I always thought the major area Honda lacks is in the style department and this proves it.
A world of difference due to lighting and this ultra technical lighting actually compliments the design queue of the Civic. Well done on the design!
Honda engines, design and reliability are Fantastic but due to lacking style, other Trendy manufacturers like Hyundai, Kia, MG, European brands etc getting more recognition and increasing market share.
You must really looove your job to do something like this. Congrats!
Unbelievably talented. Amazing work. You are an electrician engineer artist.
The work is elaborate, but the maintenance is difficult in the event of a malfunction
Put the parts’ quality aside, use of IC socket as well as no applying anti-damp coating to PCB and soldering points would shorten the lifespan of all parts, as those lamp modules are designed to allow moisture staying in and get evaporated repeatedly. About the craftsmanship, it is pretty awesome.
Oooooooo
Блин,как же круто ты это делаешь👍👍👍
ruclips.net/video/D7rDUg6yPiA/видео.html
Точно!
Those are such a great idea for aftermarket lights for the Honda. Looks like they could work on a 2014 civic sedan.
They dont
Yes,they do. The model on the video is 2015 9th gen.
@@silindirsiz Is a 2012 gen bro, civic 9th Gen are from 2012-2015, but the 2012 model is very different to the 2013-2015 model
Amazing...this man should be in bmw... Mercedes...jaguar.... Company as a chief designer for such tail lights....these companies deserves such talented and dynamic man ❤️🔥
Se eu tivesse um Honda Civic, isso seria algo que eu gostaria muito de ter no carro! Excelente trabalho!👏🏾👊🏾
Amazing work , start designing your own brand of lamps. 👌🏽👍🏾
...somewhere in the U.S this idea will be stolen, imitated, eventually patented and raped with investor's then sold off to the highest bider like everything and everyone else. When in doubt you have a great and marvellous idea perhaps it'll be wiser to keep it for personal use avoiding the tube market. Overall the light is cool.
Us
Trampo do cão, prefiro comprar pronta. Mas sem dúvida ficou magnífico 👏👏🇧🇷
pensei o mesmo kkkk
ficou bom, mas nao achei que ficou top...
Quem fizesse isso no Brasil ia ganhar uma grana.
@@CarlosLima-yn8me sera que pode fazer isso no brasil aqui tem tanta "burro cracria" que é capaz de tu tomar uma multa de fizer isso
@@idriescaramori3076 pior que não pode fazer mesmo nem por LED
LED tasarımında ufkun açık usta. Stop lambaları yeni bir çığır atladı. 💯
This guy has a seat by his name in Hogwarts.
Amazing stuff.
Really great.
Thank you for showing this - now I know that I should never do something like this!!!
lol we on the same page
Make one and some one hits you you'd have to kill em🤣
👍
Wy not?
trust me I said the same thing too and it took me almost two months to finish them 😂😂
Awesome that was so awesome all that hard work paid off at the end cuz that was off the chain
I go from "oh it easy i can do it" , to "ok i just watch for fun anyway". Nice work man
neredeyse nefes almadan izledim çok güzel olmuş el emeği
Sensacional essa customização. Espero que os leds sejam de ótima qualidade...
Really looking awesome than the original one ♥️🔥🔥
Automobile companies doesn't respect such talented artists, then the result is this.👏👏
This is a true next level Art
its looks very good than original. even better than stock lights. respect
In Europe you wouldn't pass the mandatory technical inspection with those.
Honestly
dayıcım eline koluna sağlık ne ugrastın be ben izlerken yoruldum :)
i am speechless..how talented you are...and yes you have all the skills and appropriate tools for making your idea in to actual
великолепная работа!!!!!👍👍👍
Beautiful. Amazing results ☺️
I hope nobody rear ends you.
Literally made his car look 10-15 years younger
the car is only 9 years old
Go to any car company!!! Great work.. Love from 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳INDIA
literalmente um artista, meus parabéns
Eu achei ridículo kkkkkkkk
Top ao achou feio as pessoas que não tem capacidade de entender que se esse cara fez isso caseiro imagine se ele tive as ferramentas certas
Nice one, I think I am gonna have to find 13 minutes of my time tomorrow to do the same
More like 13 hours hahahahh
gavat är fullt av turkiska
@@mohammedgujbawu6746 13 days
You should be working in design for one of the top automakers. You've have talents beyond mere mortals...👏👍👏👍👏👍
Why not working for himself and sell his products to these big automakers? By that way he can earn millions and millions
Buen trabajo👌🏻, la única pega es cuando vayas a la ITV en españa😪
excelente trabalho parabéns pela dedicação e profissionalismo
🇧🇷
excellent work congratulations for your dedication and professionalism
Mais fácil comprar um carro novo já com LED kkk
Looks like something Iron Man would drive. Them tail lights resemble him so much!
Iron man would not drive a Honda 😂😂
@@floridajames04 hiiii
@@floridajames04 unless its an NSX, but id see iron man driving an american car, or an italian
Es un crack
@Kenny Venegas k pasa perkin
Vendo assim é tão simples....Parabéns irmão vc é foda...
In Modern Living Rooms Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
Cara onde compra esse tipo de led? Tentei no ML e no eBay sem sucesso...😔
@@laurabrown1971 😃
@@hansblackbullet2737, você diz esses LEDs que aparecem aos 5:50 do vídeo? Se sim, é conhecido como "Power Led", a parte preta no caso conhecido como "dissipador estrela". Podem ser comprados separadamente ou até mesmo conjunto que venha ambos. Só pesquisar por esses dois nomes mencionados que você acha.
O autor do vídeo é da Turquia. Gente boa demais ele.
What an artist... You're.... Salute... Very neat job... Human like You should be praised about Your talent...
I Love it. U provided it u r the best in your profession. I will try in my own car. Thanks 👍😊
İçinden geçtin usta eline sağlık 💥💥💥
Your craftsmanship is incredible!
This guy is a chemical, plastics, electrical, electronics (engineer), creative designer - all rolled into one !
In an instant I love your channel lol. Man.. you deserve more subscribers and viewers. Neat customizations, love them! You just earned yourself a new sub 🤙🏼
That was a lot of work! Fantastic outcome! 😎👍
Se é loco, hein! Nunca tinha visto algo parecido. Perfeito
we definitely don't feel like Throwing It All Away...
these taillights are badass!!!
If a biker breaks his tail light, I would expect John Wick reaction from him..
Hahaha!
😂😂😂😂
xD
Hahaha this is epic🤣
Nahhh, he would collect the insurance money and make an even better one...
Parabéns 👏👏👏👏. Uma obra de arte. 🙌🙏
That was some high quality fabrication.
Built not bought wow this guy has real bloody talent wow ❤️
It would be a great blessing if you link the parts too in the description
Thank you
Love you and your work a lot
I am your biggest Indian fan!!!!
Very time consuming and detailed work. Good Job !!❤️
Beautiful, what an amazing job and result !
Bhai kitne ka hisab kitab hai red light ka aur koi mobile number de do yah bandhega
Amazing job. Great tutorial. It's damn near impossible for most of us tho. 🤪
Yemek yerken izleyin süper oluyor :)
Você é muito fera, parabéns pelo trabalho! Meu sonho seria você fazer a lanterna da minha VW Parati.
É dois viu mano, também queria que ele fizesse da minha
O autor do vídeo é da Turquia.
Man, That's freaking awesome. Wish I could do it.
And for the time and money you waste, you can buy this for less money and effort.
Amazing! Now you make me want stick mine in the oven and build a set. Your a true craftsman. Thank you for sharing your skills.
I love the outcome and engineering. How long did it actually take to build? I’d love these for my Tacoma !!
I just loved the quality of work🖤
That’s a tone of work
Tube de mais se vc fosse daqui do 🇧🇷 iria lhe contratar pra fazer essa mágica no meu Polo 2005 sedan. Seu trabalho é único.
Admiro d+ seu trabalho!
Muito legal , muito bonito , masssssss quero ver outro fazer igual lkkkkklk
Прикольно! Минус, что фонарь одноразовый - 1 диод сгорит и придется разбирать полностью всё.
100% учитывая качество запчастей и тонны проводков))
Соглашусь, что прикольно, но очень ненадежно, как выглядит, так и в эксплуотации. Еще с сигналами торможения намудренно, очень маленькие и невнятные. В России с такими, точно пришлют сзади))))
This video is smart, let’s people appreciate the work, and understand the reason behind the pricing on product’s
Ждём следующее видео-"замега перегоревшего диода"
Ждём следующие видео со штраф стоянки за использование тс с измененными внешними световыми приборами
Deu outra "conotação" ao veículo, excelente! 👏🏼👍🏼
That’s a lot of handwork!
Hard work? Tf you mean? That’s being smart. Hard work is working with a shovel all day.
Reis gene döktürmüşsün. Nazar değecek diye korkuyorum