My first motorcycle was a 1994 yamaha XT350, bought used back in 2008. With the help of it, I completed high school, University and my first working years. I have further meet my wife on top of it, and travelled extensively trough Europe. It currently has 288.000 kms, with 2 engine repairs.
ive ridden many bikes but something about the xt 350 i just love. fast nimble comfortable easy to work on. even the dual carb set up isnt hard to work on.
That was my bike after my 82 XT125, but was an 85. Yes, it was a wheelie monster and was bullet proof. Front travel was 10", rear was 8.7". only thing missing is fork boots.
98% of my riding with a 2011 XT250 is done on gravel back roads which sometimes intersect with highways. The XT250 tops out at around 50-55 mph which just doesn't cut it with vehicular traffic. Not wanting a big, heavy 650, I picked up a well-cared for '87 XT350 about a month ago. It was adult-owned with only 3400 miles( that reads three thousand, four hundred miles) on it and no signs of it ever being off the road. I'm looking forward to seeing what it'll do on the highway when the time comes.
its pretty clean always likede the xt 600 got out hospital otherday this is number 1867 video of what ive watched while on vaction in hospital lol still watching got 1100 videos left to watch give or take lol
My first enduro, I had a 98 though. It was a great bike that never gave me ANY problems. Super nimble and light but the suspension sucked for any real offroading. On the street though, it was fun and goid around town. I rode it almost everyday to work and school over a year. Sold it for a XR650R that was plated
I have a 93 xt350 I bought about 6 years ago, ran like crazy initially, brought it to a local Yamaha dealership I trust, they tuned the carb. Said someone had messed with it and it had the wrong size jets in it, and they did a leak test on the valves and said everything was good. A lot of clatter noise in the right front cover, always suspected valves needed to be adjusted. Bike would only do about 50mph and didn't have any low end torque. Let my father drive the bike for 2 months and it quit on him, doesn't have any compression and has been off the road ever since. Bike had about 9k on it
Mine is a 97 and it has never been able to do 90 lol. It revs out at around 80. It is a fun ride from the city to the trail and back but I don't like the highway. Fun little bike but not for jumping at all.
Don't need the kickstand switch, the wires are male and females specifically so you can bypass it. I have mx suspension front and rear on mine. I do plenty of huge jumps kickstand stays up fine.
@@ddhh6552 I used a 2014 raptor 700r se shock. Hi/low compression. Was only $125 through Yamaha parts channels. Mounting bolts are the same size. I had to cut off the reservoir and thread it with ORB fittings. Then ran a stainless hose to under the left side panel. You have to grind the linkage stop a little bit to permit more travel. This setup would need resprung for most people, but I weigh 155 lbs. Front end is 2001 yz125. Steering stops work without modification. I shrunk-fit a top bearing sleeve to the stem, machined it down. Made a ~3/4" thick aluminum spacer on top of the top dust cap. Also used a spacer to go underneath the top bearing cup in the frame. I used the "all balls" fork conversion chart to find suitable bearings.
@@ddhh6552 It rides very well. Weirdly, it made it perfectly stable at 65 mph too, despite being 3 or 4 inches taller. I trimmed some weight down by converting to led lighting, and I think it's about as good as it gets for a dual sport. The rear drum works sufficiently, but would be nice to convert to disk brake and aluminum swing arm to save 5 lbs. There is a video of it on my channel.
Excellent overall bike.. Light feel to it, and a fantastic Wheelie Machine.., I can attest to that.. Like an early 90's DR 350, but better.. Nice Wheelies, Ken... 🏁🇺🇸🏁
I love all motorcycles but my history runs deep with the Yamaha back to 1972 with my first GT 80 and all of my championships in Motocross and Arenacross were on Yamaha so that's a big reason why but I do love my KLR 650 and my XR 650 Honda I'm a big dude and I ride with the Christy on the back a lot
I do like the dual sport motorcycle a lot but I did got a new Suzuki DR200S that is a 2020 and I really injoy riding it a lot ? This June I’m picking up a new Kawasaki Klx 300 that is coming in 2021 that I getting a second dual sport motorcycle that I can ride also at home or on the road or trails near by.
i helped a buddy get a 600 xt same red and white out of hiding hadnt ran in 20 years .had it running and oil changed and new tires on the next day was a cat walk machine also ...hard to start kick over ...have tobe a beast to make it kick off ...and fire up ..350 would be nicer.
Great looking bike. Just bought a ‘93 XT350 and need to replace the tires. What tires does this bike have, brand and size - looks awesome! Thx from MN.
I bought a bridgestone trail wings for mine. Size 80/100 r21 in the front and 120/80 r18 in the back. Those are the tires that the new XT250 is coming with, and they fit perfectly the XT350. Good on the road and good off the road.
Hi Mr Kaplan , I use to have a 2000 Yamaha xt 350 that I sold to someone about a year ago that I buy from lanes Yamaha in 2000 in Watkins Glen New York
Xt350s had a super stiff clutch. Best to change to an easy puller. Also if you can find one of the new rear shocks made aftermarket. All the original rear shocks are not good at this time due to thr gasket releasing gas
Hi first I have to say I love this channel. I love the 2 strokes. Specially the old ones. For a road bike I guess it's better with this 4 stroke. The question I have right now is why do you carry a revolver?
My friend aka Uncle Dale was followed out of the Target store after paying cash $600 for his purchase buy a scumbag Lowlife who pulled a gun on him and pointed it right in his face and told him give him the billfold or he was going to blow his head off. Uncle Dale reached in his pocket like you was grabbing the money and actually grabbed his 25 caliber handgun his grandfather gave him and shot the thief in the cock and balls when he fell to the ground he stomped his face in with his Chippewa boots... it's a tough world we live in dog eat dog. If he did not have his handgun for protection he would be a dead broke man. He's fine in a judge agreed that he did nothing wrong it was self-defense however the perpetrator is now a eunuch with no testicles and lucky to be alive. I'm not sure if you watch the news much but it's getting crazy out there and some of the area's I go to without a handgun would be pretty risky.
@@KaplanCycles thank u for the fast & honest answer! I live in Sweden and here we have much harder weapon restrictions. it starting to get worse and worse here to. in that situation I rather have a gun then not have. (But if it happens to me, like tomorrow I would be broke and I guess Dead or crippled.) I guess the ones that have a weapon here are in law enforcement or are a hunter. Again thanks for an awesome channel! I try to watch everyday one or two videos or like today I watched about 4 hours.
I have the TT350 2001 not much difference can't wait to get her out on the trail of Western Australia keep safe guys were living in some carzy time Trump 2024
My first motorcycle was a 1994 yamaha XT350, bought used back in 2008.
With the help of it, I completed high school, University and my first working years.
I have further meet my wife on top of it, and travelled extensively trough Europe.
It currently has 288.000 kms, with 2 engine repairs.
Do you add air cooler or anything I worry mine gets hot
ive ridden many bikes but something about the xt 350 i just love. fast nimble comfortable easy to work on. even the dual carb set up isnt hard to work on.
Man, wish they still made this beauty of a bike !
The new klx300 dual sport is basically the closest you can get to this. As an owner of both bikes.
@@781destroyer how much newer does the Kaw feel ? Probably skinnier and of course flatter
It's missing the dust covers on the front shocks 27hp
Starting off with a wheelie thats what I'm talking about kap💪😎🇺🇲
Where are the fork squeegies
Priceless BEAUTY
I love the mic throw.. got a buck bowie and a revolver just in case..
It's missing the red fork boots
That was my bike after my 82 XT125, but was an 85. Yes, it was a wheelie monster and was bullet proof.
Front travel was 10", rear was 8.7". only thing missing is fork boots.
98% of my riding with a 2011 XT250 is done on gravel back roads which sometimes intersect with highways. The XT250 tops out at around 50-55 mph which just doesn't cut it with vehicular traffic. Not wanting a big, heavy 650, I picked up a well-cared for '87 XT350 about a month ago. It was adult-owned with only 3400 miles( that reads three thousand, four hundred miles) on it and no signs of it ever being off the road. I'm looking forward to seeing what it'll do on the highway when the time comes.
That just might be the best-looking XT I have ever seen very very nice example.
its pretty clean always likede the xt 600 got out hospital otherday this is number 1867 video of what ive watched while on vaction in hospital lol still watching got 1100 videos left to watch give or take lol
You get the #1st place of viewers for 2020!!! ML&R
@@KaplanCycles i try cause i watch them all well not yet on on 2137 video now lol
My first enduro, I had a 98 though. It was a great bike that never gave me ANY problems. Super nimble and light but the suspension sucked for any real offroading. On the street though, it was fun and goid around town. I rode it almost everyday to work and school over a year. Sold it for a XR650R that was plated
I still have an xt350 and you are correct. The suspension sucks. Don't try any big jumps. It bottoms out on the small ones.
I have a 93 xt350 I bought about 6 years ago, ran like crazy initially, brought it to a local Yamaha dealership I trust, they tuned the carb. Said someone had messed with it and it had the wrong size jets in it, and they did a leak test on the valves and said everything was good. A lot of clatter noise in the right front cover, always suspected valves needed to be adjusted. Bike would only do about 50mph and didn't have any low end torque. Let my father drive the bike for 2 months and it quit on him, doesn't have any compression and has been off the road ever since. Bike had about 9k on it
The cam chain probably let go.
I just picked one up. Same year, Love it so far 👍
Nice bike kenny!
I had an 86 for my very first bike 6 years ago, I miss it sometimes but then I remember the dual carbs…
Mine is a 97 and it has never been able to do 90 lol. It revs out at around 80. It is a fun ride from the city to the trail and back but I don't like the highway. Fun little bike but not for jumping at all.
Mine would do over 90, and correct, horrible jumper. the kickstand bounces on landing and his the kill switch causing it to stutter on landing.
Don't need the kickstand switch, the wires are male and females specifically so you can bypass it. I have mx suspension front and rear on mine. I do plenty of huge jumps kickstand stays up fine.
@apodski Which suspension parts did you go with. I heard the xt600 rear shock helps, but what did you use on the front?
@@ddhh6552 I used a 2014 raptor 700r se shock. Hi/low compression. Was only $125 through Yamaha parts channels. Mounting bolts are the same size. I had to cut off the reservoir and thread it with ORB fittings. Then ran a stainless hose to under the left side panel. You have to grind the linkage stop a little bit to permit more travel. This setup would need resprung for most people, but I weigh 155 lbs.
Front end is 2001 yz125. Steering stops work without modification. I shrunk-fit a top bearing sleeve to the stem, machined it down. Made a ~3/4" thick aluminum spacer on top of the top dust cap. Also used a spacer to go underneath the top bearing cup in the frame. I used the "all balls" fork conversion chart to find suitable bearings.
@@ddhh6552 It rides very well. Weirdly, it made it perfectly stable at 65 mph too, despite being 3 or 4 inches taller. I trimmed some weight down by converting to led lighting, and I think it's about as good as it gets for a dual sport.
The rear drum works sufficiently, but would be nice to convert to disk brake and aluminum swing arm to save 5 lbs.
There is a video of it on my channel.
Excellent overall bike.. Light feel to it, and a fantastic Wheelie Machine.., I can attest to that.. Like an early 90's DR 350, but better.. Nice Wheelies, Ken... 🏁🇺🇸🏁
@Tim Allen Yup.., I agree with all...Honda always had the edge in the 80's overall, anyway... 🤣🇺🇸🤣
I love all motorcycles but my history runs deep with the Yamaha back to 1972 with my first GT 80 and all of my championships in Motocross and Arenacross were on Yamaha so that's a big reason why but I do love my KLR 650 and my XR 650 Honda I'm a big dude and I ride with the Christy on the back a lot
I do like the dual sport motorcycle a lot but I did got a new Suzuki DR200S that is a 2020 and I really injoy riding it a lot ? This June I’m picking up a new Kawasaki Klx 300 that is coming in 2021 that I getting a second dual sport motorcycle that I can ride also at home or on the road or trails near by.
i helped a buddy get a 600 xt same red and white out of hiding hadnt ran in 20 years .had it running and oil changed and new tires on the next day was a cat walk machine also ...hard to start kick over ...have tobe a beast to make it kick off ...and fire up ..350 would be nicer.
compared to xt 600 its just heavier with bigger engine and frame ?
Great looking bike. Just bought a ‘93 XT350 and need to replace the tires. What tires does this bike have, brand and size - looks awesome! Thx from MN.
I bought a bridgestone trail wings for mine. Size 80/100 r21 in the front and 120/80 r18 in the back. Those are the tires that the new XT250 is coming with, and they fit perfectly the XT350. Good on the road and good off the road.
Hi Mr Kaplan , I use to have a 2000 Yamaha xt 350 that I sold to someone about a year ago that I buy from lanes Yamaha in 2000 in Watkins Glen New York
I have a 1999 xt350 1700 miles in very nice shape. The issue im having is with the carb and parts for the carb. Are there any aftermarket options?
I just got 1987 XT350 last Year i love it
Is there a correct way to start these I always have to give it gas and choke
Is $250 a good deal for a 1989 one? It's just missing the back number plates.
My first endrou xt 350. 1990 model. Lovely from Turkey...👍
I have that exact bike and the tail light flashes with the turn signals.. is that normal?
I have the 350tt and I trail ride it regularly and the thing just doesn’t skip a beat love it nice bike !
Xt350s had a super stiff clutch. Best to change to an easy puller. Also if you can find one of the new rear shocks made aftermarket. All the original rear shocks are not good at this time due to thr gasket releasing gas
would you suggest lighter clutch springs? i have an xt 350 and ill agree the pull is a bit tough.
Very clean looks brand new👍👍🤤
Only 6900 miles is awesome
Espetáculo de moto , esse guarda-lamas da frente até dava medo. Para quando uma nova versão baseada na estética deste modelo e com o motor da R3!!!
Hi first I have to say I love this channel. I love the 2 strokes. Specially the old ones.
For a road bike I guess it's better with this 4 stroke.
The question I have right now is why do you carry a revolver?
My friend aka Uncle Dale was followed out of the Target store after paying cash $600 for his purchase buy a scumbag Lowlife who pulled a gun on him and pointed it right in his face and told him give him the billfold or he was going to blow his head off.
Uncle Dale reached in his pocket like you was grabbing the money and actually grabbed his 25 caliber handgun his grandfather gave him and shot the thief in the cock and balls when he fell to the ground he stomped his face in with his Chippewa boots... it's a tough world we live in dog eat dog. If he did not have his handgun for protection he would be a dead broke man. He's fine in a judge agreed that he did nothing wrong it was self-defense however the perpetrator is now a eunuch with no testicles and lucky to be alive. I'm not sure if you watch the news much but it's getting crazy out there and some of the area's I go to without a handgun would be pretty risky.
@@KaplanCycles thank u for the fast & honest answer! I live in Sweden and here we have much harder weapon restrictions. it starting to get worse and worse here to. in that situation I rather have a gun then not have. (But if it happens to me, like tomorrow I would be broke and I guess Dead or crippled.)
I guess the ones that have a weapon here are in law enforcement or are a hunter.
Again thanks for an awesome channel! I try to watch everyday one or two videos or like today I watched about 4 hours.
@@KaplanCycles right on Ken, the world has gone mad.
I just bought one of these I love it!!
It looks great!!
I have the XT 250 89"
Are those Shinko 244?
I have one in yellow black
My dad had 500 when I was a kid in the uk fun
Those are beautiful bikes!
i love the bike i'm looking at one on marketplace right now but i wanted to know a little more about them
Buy xt600 43f or 2kf model
why is he so strapped. My man is about the heat
Ready for WAR!
I got a 1979 with a fresh rebuild for sale clean nj title just missin rear shrouds for sale
Ive always heard these are wheelie machines but before mine blew up i allways had a hard time doing that.
I bought one of the last production lines a 2000 four years ago. I tried to sell it but I can’t.
Call us we will sell it for you 860 454 7024
There red they go over front forks and they're like covers
the xt350 are 2 stroke?

100%
Yes they are, can’t you hear it?
Yes they are, can’t you hear it?
Beauty
I like it!!!
Very nice!! 👍
If you do a giveaway bike to one of the subscribers channel would jump no kap!
Of course you need a gun to test a motorcycle
I have the TT350 2001 not much difference can't wait to get her out on the trail of Western Australia keep safe guys were living in some carzy time Trump 2024
😍😍😍😍