Qidi just released the plus4, which is the perfect cosplay printer if you ask me! It’s 305x305x280 sized, and it has an active heater at 65C so your ASA/ABS prints can be extremely durable. ASA/ABS is even easier to sand than PLA, or you could make a vapor-smoothing setup with acetone to skip 90% of the post-processing. You can also use acetone to chemically weld your prints, so that the gap between prints is just as strong, if not stronger than the rest of the print. The Plus4 also costs only 800USD, and has an AMS releasing in the first quarter of next year. Qidi also doesn’t spy on you like Bambu, and has the greatest customer service of any 3D printer company.
I love how the quality of your videos is always increasing. It is at a really high level now and the two of you have such good dynamics. I‘m already looking forward to the next videos.
I'm working on a helmet now but will likely do a custom paint job. Probably black and red. But excellent idea with the weathering with a cotton swab and mineral spirits. Going to give that a try! I started doing the black wash how you guys did it in this video and the Helldivers one and it's a game changer. My B01 armor is by far my best paint job yet. I also use that Seymour filler primer. It's so good.
It looks like you're close to the Chaplain helmet; just replace the mouth part and the top part with the Chaplain skull, and then it’s done. It’s the same helmet-that’s the only real difference.
One complaint, behind the tubing should be a solid plate, there really shouldn't be an open gap like that, they're meant to be environmentally sealed for a reason.
What build plate size would be required to print in one piece? I see they can fit 24" heads often, from website, but doesn't give dimensions externally.
Roughly a 300x300 would be needed to print a helmet- give or take depending on how you need to resize your helmet. I've done full helmet prints on Neptune Series printers, but the print quality on the Bambu Lab printers is hard to beat.
I love the key idea! It looks super helpful. I noticed you dont do the soldering iron welding technique anymore. Is the super glue and activator solid enough to keep the pieces together long term?
Depending on your slicing settings, most GA Helmets use between 1 to 1.2 rolls of filament. I've done plenty helmets with less than a roll of filament used.
Two questions dogs! One what do you use or do to get moisture out of your filament cause they seem so smooth! Two any plans to release full armour stls for your patreons!?
When Bambu comes out with a larger build plate printer I’m going to pump out so many helmets
You and me both
I'm literally getting an A1 just to print helmets lol
Qidi just released the plus4, which is the perfect cosplay printer if you ask me!
It’s 305x305x280 sized, and it has an active heater at 65C so your ASA/ABS prints can be extremely durable.
ASA/ABS is even easier to sand than PLA, or you could make a vapor-smoothing setup with acetone to skip 90% of the post-processing.
You can also use acetone to chemically weld your prints, so that the gap between prints is just as strong, if not stronger than the rest of the print.
The Plus4 also costs only 800USD, and has an AMS releasing in the first quarter of next year.
Qidi also doesn’t spy on you like Bambu, and has the greatest customer service of any 3D printer company.
@@awildridehome9469 800 is pricey for a not very well respected brand name printer
tbh after watching the video still no clue how they built it, can you show the process more and not sit at a table talking about it, cheers
You could always look at their other videos
Wait, they literally show you how to put it together in this video?
I love how the quality of your videos is always increasing. It is at a really high level now and the two of you have such good dynamics. I‘m already looking forward to the next videos.
Thank you so much! We have lots of ideas!
I'm working on a helmet now but will likely do a custom paint job. Probably black and red. But excellent idea with the weathering with a cotton swab and mineral spirits. Going to give that a try! I started doing the black wash how you guys did it in this video and the Helldivers one and it's a game changer. My B01 armor is by far my best paint job yet. I also use that Seymour filler primer. It's so good.
For the emporer
EMPORER ??? HERETIC!!!
Please, for the love of god, consider the victrix honor guard.
the cans of gw stuff are great but expensive.... keep on their good side lads haha
so ✨HD✨
It looks like you're close to the Chaplain helmet; just replace the mouth part and the top part with the Chaplain skull, and then it’s done. It’s the same helmet-that’s the only real difference.
One complaint, behind the tubing should be a solid plate, there really shouldn't be an open gap like that, they're meant to be environmentally sealed for a reason.
BROTHER
May I have some oats, brother?
@Galactic_Stab no ƁŘŒȚĤƏŘ they are my öāț§
@@flatlineforge5119 I am starving, Brother!
That key is genius. Did we just witness the conception of the Galactikey???
Full suit in the future🤔
It’s not necessarily Titus’s helmet it could be any ultramarine Lieutenant
I am totally using this process on my Mandaloroan helmet. I will totally send in the results!
What build plate size would be required to print in one piece?
I see they can fit 24" heads often, from website, but doesn't give dimensions externally.
Roughly a 300x300 would be needed to print a helmet- give or take depending on how you need to resize your helmet. I've done full helmet prints on Neptune Series printers, but the print quality on the Bambu Lab printers is hard to beat.
I love the key idea! It looks super helpful. I noticed you dont do the soldering iron welding technique anymore. Is the super glue and activator solid enough to keep the pieces together long term?
I would imagine the bondo probably helps with it so they thought CA would be fine for the initial holding.
Lifesize Titus when?
.....
Will you be making an armor eventually?
now i need a sisters helmet
Please create full space marine armor🎉
are you finishing the armour set?
How much filament did this use aproximately
Depending on your slicing settings, most GA Helmets use between 1 to 1.2 rolls of filament. I've done plenty helmets with less than a roll of filament used.
Two questions dogs! One what do you use or do to get moisture out of your filament cause they seem so smooth! Two any plans to release full armour stls for your patreons!?
What laser leveler do you recommend? Love that idea just don’t know which one to get.
Any straight laser will work but one that has a 1/4" mount will be very handy
Black legion when?!
please for the love of Terra make a mark 4 helmet! I would buy it in an instant
These days its more basic to hate on Ultramarines. It's so cliche that people do it without knowing why the hate started in the first place.
Awesome!
What settings should be used on a neptune 4 max to have this print nicely, ive tried about 5 times and all failed.
For the greater good 😉
Any chance you will release a chainsword?
Yes we're working on one that will spin now!
Quick question, will these file eventually find their way to your store as well or are they going to be patreon exclusive forever?
@@wyattstueven patreon forever
What is the 2 part glue and activator?
We use MITREAPEL Ca Glue with Activator. But there are tons of different kinds you can use.
can you do a tutorial on how to do the x key, please? that method would come in handy for so many helmets that need to be cut up to fit on the bed
Personally, what I'm doing is taking the key STL from the file set and using it in my other builds- but do that at your own risk.
I became a monthly patron just to get this helmet but where do I find the downloads?
@@HenloduToit it's the primaris helmet
@@GalacticArmory thank you for your fast reply! Got it, busy printing!🥳
What bondo are you using that doesn't need to be mixed first?
Bondo Glazing and Spot Putty
so this file isnt available anymore?
It's available through our Patreon right now!
@@MjrProps which tier i need to go for?
@@thermoshokSpecialist
Ok ty
Now we need Space Crusaders to take Space Jerusalem 🦾
I want the chaplins skull helmet
Coming real soon!