Om my - what a corker of a rifle....and by the first BR card results we are in trouble.....I do like how we all say its non competitive, but beneath the surface we are all trying our hardest 🙂 Its nice to see you had the same results as Anshutz, with the same pellet - refreshing its just not a photo copy of a group from 1983 which comes in the box 🙂
Thanks Tim, initial results are very good, just need to get some time behind the trigger now, its only a friendly competition buts its still good fun, and we have to catch up to Phil, I think he will be hard to beat this round. Thanks for watching.
Your first time shooting this rifle... with a stock that's too small for you... the action and barrel haven't yet bedded in... and you score 246! 😱 An astounding effort my friend, and a stunner of a rifle! I cannot wait to see the obvious improvements that will ensue. Top stuff! 😎
Cheers mat appreciate that it certainly is a little tac driver, excited to get it in the competition next week and try it properly. Thanks for watching.
Awesome gun and awesome shooting on that card great job the gun looks badass 👏 can't wait to see what you come up with the gun thanks for sharing bsafe buddy 👍
What a combo! Probably the best rifle and scope combo money can buy and after your future mods .. tim you are definitely in trouble and shedwolf is probably sweating alittle too 😜👍
Awesome jake. This will give the shed wolf a run for its money. Give me a ring before you get too stuck into the 9015. I've some bits here that might be useful..
@@sub12airgunners the machining vids are mesmerising. Its your fault I chopped a barrel up last week.didnt go to plan but we all gotta start somewhere eh 😄
I am hoping I have got the newer reg with the cut our, it does seem to be a little higher on power than other rifles I have read about the power with heavy's is around 11.5, so a little on the higher side but the plenum will need to be machined out to improve efficiency. Thanks for watching.
@@sub12airgunners Being an HP it should have the cut away reg, doesn't add much volume though compared to a Tench conversion where more of the reg body is machined and he opens up the plenum. It will make just under 12ftlbs even with the reg at only 65 bar.
@@SteveC200 I read that, I am definitely going to look at machining the block, or my other idea was to move the reg back into the cylinder and use the reg housing in the block as a plenum, but we will see what happens. Thanks for Watching.
No legal issues unless you turn it into a FAC rifle, it would be your responsibility to make sure the block was safe to pressurize, IE you wouldn't want to make the block wall too thin. But apart from that no issues there. Thanks for watching.
@@paulblundell8033 Thanks mate we are going to make good use of it, we used it the other day to look at a pellet and saw some very interesting deformation, definitely coming to the channel though. Thanks for watching.
Oh yes😎 I see this games getting serious now 😉. Obviously Phils Annie sucked you in mate, and Im sure the magic 250 is just around the corner. Im very interested in this rifles journey through your hands with mods and tweaking its going to be getting. Looks like I’ll have to put some more time into the Kral now 🤔
Cheers Chris, yeah Phil is the culprit his rifle sucked me in, 250 is definatly possible with this rifle, you can feel it. Thanks for watching hope to see you at the range next week mate.
Om my - what a corker of a rifle....and by the first BR card results we are in trouble.....I do like how we all say its non competitive, but beneath the surface we are all trying our hardest 🙂 Its nice to see you had the same results as Anshutz, with the same pellet - refreshing its just not a photo copy of a group from 1983 which comes in the box 🙂
Thanks Tim, initial results are very good, just need to get some time behind the trigger now, its only a friendly competition buts its still good fun, and we have to catch up to Phil, I think he will be hard to beat this round. Thanks for watching.
Great video Jake - really looking forward to this transformation. Keep up the good work.
No problem, Thanks for watching.
Your first time shooting this rifle... with a stock that's too small for you... the action and barrel haven't yet bedded in... and you score 246! 😱 An astounding effort my friend, and a stunner of a rifle! I cannot wait to see the obvious improvements that will ensue. Top stuff! 😎
Cheers mat appreciate that it certainly is a little tac driver, excited to get it in the competition next week and try it properly. Thanks for watching.
Great video as usual with good shooting, fine rifle and looking forward to the upgrades👍🏼
Cheers mate , much appreciated. Thanks for watching.
248-14x for sure well shot
Subscribed for this build... Can't wait... 👏💯
Thanks much appreciated, Thanks for watching.
Awesome gun and awesome shooting on that card great job the gun looks badass 👏 can't wait to see what you come up with the gun thanks for sharing bsafe buddy 👍
Thanks mate, its going to be interesting, Thanks for watching,
Have you tried the Snowpeak Mat300? Physically, both rifles are identical. I think Anschutz rebranded the Snowpeak product, similar to what Diana did.
What a combo! Probably the best rifle and scope combo money can buy and after your future mods ..
tim you are definitely in trouble and shedwolf is probably sweating alittle too 😜👍
Cheers mate, no excuses now just need to get some time with it and get some high scores. Thanks for watching.
@@sub12airgunners the shedwolf is going to put all these pro target rifles in there place mate, behind it 😀
@@jeffhello1444 Throwing down the gauntlet then Geoff!
@@dgg7377 🤣 i might look old and half blind but i can still give these youngsters a run for there money 😂
The lengths some sons will go to compete with their dad 😉😉
LOL don't you start, I have justified it by calling it a video project, but the old man is not winning this time. Thanks for watching.
Looks very good. Get yourself an official marking gauge and I think your score would be closer to a 248 and possibly an extra x or two.
Good shout, I read about them the other day ill have a look, Thanks for watching.
Awesome jake. This will give the shed wolf a run for its money.
Give me a ring before you get too stuck into the 9015. I've some bits here that might be useful..
Ill throw you a message cheers for that Tilly, Thanks for watching.
@@sub12airgunners the machining vids are mesmerising. Its your fault I chopped a barrel up last week.didnt go to plan but we all gotta start somewhere eh 😄
@@tillysgunstocks Lol the first barrel is a bit of a tough one, you just got to get it out the way, once you learn its easy. Thanks for watching.
Here it is 😎😎😎
Cheers Matt, Thanks for watching mate.
😊😊😊😊 Nice rifle.
Superbly
Hi does your Dads red wolf keep up with this ?
Nice toys
Woohoo !! 👌
Thanks for watching 👍
get a .22A scoring guage you will be surprised how your score will be different from what you think
Come give benchrest a go at Airabilty fun weekend 😁
Ill have to try and make it up but its a fair ways away I am afraid, Thanks for watching.
All i do is squirrel shooting it's an eye opener watching your video well done 👍 education seeing your videos thanks
It'll be interesting to see what you think of the HP plenum volume and reg pressure and what you do with it.
I am hoping I have got the newer reg with the cut our, it does seem to be a little higher on power than other rifles I have read about the power with heavy's is around 11.5, so a little on the higher side but the plenum will need to be machined out to improve efficiency. Thanks for watching.
@@sub12airgunners Being an HP it should have the cut away reg, doesn't add much volume though compared to a Tench conversion where more of the reg body is machined and he opens up the plenum. It will make just under 12ftlbs even with the reg at only 65 bar.
@@SteveC200 I read that, I am definitely going to look at machining the block, or my other idea was to move the reg back into the cylinder and use the reg housing in the block as a plenum, but we will see what happens. Thanks for Watching.
@@sub12airgunners I have had similar thoughts to convert mine to a korrick type of reg with, as you say, the standard reg position used as a plenum.
@@SteveC200 lots of avenues to go down, but I plan on having a play around so we will see how it goes. Thanks for watching
More interesting stuff. Do you know of any legal type requirements for testing and modifying a HP reservoir?
No legal issues unless you turn it into a FAC rifle, it would be your responsibility to make sure the block was safe to pressurize, IE you wouldn't want to make the block wall too thin. But apart from that no issues there. Thanks for watching.
@@sub12airgunners look forward to your progress
As if anyone would shoot your camera down range at Pete’s !
Though I bet it makes a better sound than the bell targets 😉
Ill have to find some armor plating for the back of it, although it would make a nice crunch probably. Thanks for watching.
@@sub12airgunners what you need is a super high resolution macro camera for the work you are doing !
Enjoy 😉
@@paulblundell8033 Thanks mate we are going to make good use of it, we used it the other day to look at a pellet and saw some very interesting deformation, definitely coming to the channel though. Thanks for watching.
What type of moderater fits on this?
we made one but you can get an adaptor for 1/2in unf 😀
What’s the score for an x ring?
Esa cosa es hermosa bendiciones
Thanks much appreciated. Thanks for watching
Quality vid...
Thanks much appreciated. Thanks for watching.
Oh yes😎 I see this games getting serious now 😉. Obviously Phils Annie sucked you in mate, and Im sure the magic 250 is just around the corner. Im very interested in this rifles journey through your hands with mods and tweaking its going to be getting. Looks like I’ll have to put some more time into the Kral now 🤔
Cheers Chris, yeah Phil is the culprit his rifle sucked me in, 250 is definatly possible with this rifle, you can feel it. Thanks for watching hope to see you at the range next week mate.
Mantap bos👍👍👍
Thanks for watching
Hello, is it .177 or .22 cal?
.177, Thanks for watching.
😁
Daystate Redwolf HP still perform better at 50 m
you 'need' 50x for 25 m? haha. yeah ok
You don't need a scope at all you can compete with a diopter but to be competitive a 50x mag scope is very useful, Thanks for watching.