you made my day sir rob allen hahahaha... "Im not gonna tight this on my finger coz this gonna be painful" .. Rob Allen guns is one of the most deadly accurate spearguns in the world of spearfishing.. very good quality product.
am doing away with the stock rubbers that came with the gun, and doing away with the metal wishbone. (bought a cheap speargun as a starter in the hobby.) this tutorial was very nice thank you. You have a very excellent delivery in your tutorials. i will use this technique when tying my new rubbers which I am going to receive tomorrow from a good brother in Athens. I must say I am looking forward to a better spearo experience with the new rubbers.
@@RobAllenSpearfishing I tried loading the speargun in the water today with the new rubbers, dyneema, but the dyneema intermittently slipped off the groove. couldnt figure out why. i must admit the new rubbers were very powerful but the dyneema was slipping off so didnt get any good shots in today. nevertheless i cut the tied ends and replaced with bead and wire will test that in the water next time. i made a slight hickup though when cutting the tied ends with the knife. i made smallsurface incisions in the rubber which cut through the uv black layer but that should be ok i think.
No , the knot holding inside the bean I suppose ? As the been was still in there but the whole white rope was out. Unlucky enough it happened 5 minutes apart (first and second rubber) on a 1200 gun. Was told by the spearfishing shop that it happened sometimes with those factory blue beans. Great gun other than that !
Our acorn rope wears out in a few dives. We are changing. Do we re-choke rubber every time the acorn string is damaged? We make a ring by the classical method. We drown the ring in the tire. We tie the acorn rope to this ring. Or we strangle the apparatus that we can attach the acorn rope to. We tie the acorn rope to it
Hi Rob, thanks for one more great video. I have followed these steps for 16mm bands and work nice, but I had a failure today with my 20mm band. The power of the band forced the wishbone insert to exit out of the loop 1 second or so after loading the gun. I had made the loop quite tight using thick dyneema, and burnt the edges well, but it seems the diameter of the band is still big enough to allow the insert to escape. Do you recommend larger inserts or to tight the loop as strong as possible?
Maybe I didn’t express myself correctly. The white 1.8 Dyneema I have is the standard one for spear tying, while the other, which is black and woven like, is not available in my area, and I was wondering if the white one will do the job.
Si pero no hace muchos años unos 60 y pocos ser zurdo era una especie de defecto que intentaban corregir en la escuela, 😂 me biene bien el supernudo 😂 saludos desde españa 👍👍👍🇺🇾
Escuché esto, tuve suerte de nacer justo después de eso. Saludos de Sudáfrica. I heard this, I was luck to be born just after that. Greatings from South Africa.
@@alaefarmestatesllc Try Contact our Distributor in Hawaii: Westside Dive & Tackle 34-614 Kupuohi Street #103 Waipahu, HI 96797 Telephone: (808) 228 2295 Email: kris.westsidedive@gmail.com Or our Distributor in the US: Triton X Inc 2500 Del Monte Street, Suite 110 West Sacramento CA 95691 USA Phone: +916-371-3441 Toll Free @ 1 877-WETSUIT Email: sales@tritonx.com Website: roballendiving.com/triton-x-usa/
Hi Michail, on our website roballen.co.za/ check out the list of distributors. If there is not a distributor in your country, email us on sales@divefactory.co.za for orders.
Mr. Rob i bought 6 meters rob allen rubber.. Is there any proper way to store it? Afriend of mine told me to put them in the Fridge to save the quality.. Any advise?
Your friend is correct. I'd keep it in a sealed bag in the bottom of the fridge, not made up. It there are any wishbones tied in, this zone will be under stress and will deteriorate. Do not put it in the freezer.
Have you tried contacting our Distributor in Egypt? Mohamed Saber 16 Gomaa Moftah, Al Agamy Al Bahri, Dekhela, Alexandria Govornonate 21500 Egypt Telephone: +201111130406 Email: ka66em@gmail.com Facebook: Rob Allen Egypt
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thank you sir Rob very clear illustration.
👍
Thank you very much. This was exactly what I was looking for.
you made my day sir rob allen hahahaha... "Im not gonna tight this on my finger coz this gonna be painful" .. Rob Allen guns is one of the most deadly accurate spearguns in the world of spearfishing.. very good quality product.
Hi SAMALSUB TV thanks for the complements 👍
am doing away with the stock rubbers that came with the gun, and doing away with the metal wishbone. (bought a cheap speargun as a starter in the hobby.) this tutorial was very nice thank you. You have a very excellent delivery in your tutorials. i will use this technique when tying my new rubbers which I am going to receive tomorrow from a good brother in Athens. I must say I am looking forward to a better spearo experience with the new rubbers.
You are welcome 👍
@@RobAllenSpearfishing I tried loading the speargun in the water today with the new rubbers, dyneema, but the dyneema intermittently slipped off the groove. couldnt figure out why. i must admit the new rubbers were very powerful but the dyneema was slipping off so didnt get any good shots in today. nevertheless i cut the tied ends and replaced with bead and wire will test that in the water next time. i made a slight hickup though when cutting the tied ends with the knife. i made smallsurface incisions in the rubber which cut through the uv black layer but that should be ok i think.
Very good instructor and professional
This video really help
Best explanation I found in YT
Silly me not coming straight to the master
Thanks for the compliment 😄
This is my first time speargun I'm trying to learn everything about how rig a double roller speargun thanks for your videos I like to learn more
Great vid Rob thanks again, appreciate the knowledge…
As always...great videos PS my 120 that you sold me in 2000, is still going great guns;)
Brilliant as usual sir
Thanks for the idea. Now I can assemble my dyi speargun. Regards from Ph.
Thank you so much idol the best &clear tutorial Godbless&happy new year❤❤
Many thanks for your kind words 🎉👍
the video is very useful as I started spearfishing👍👍👍👍
Excellent presentation.
Appreciate.
A big thanks for sharing us your knowledge.. dive safe to all spearos
The best at explaining
thanks sir, really helpful 👌
👍
Idol 🇵🇭🙏👍
Hi Rob, love the videos. Please recommend a rubber size chart to be used with your bands and guns. Thanks
Check out each gun type on our RA site, all relevant rubber diameters and lengths are listed.
What knot under the beans . Great guns rob letting u know brand new rubbers both snapped ? Bean out twice had to upgrade them.
What snapped, thew rubber itself?
No , the knot holding inside the bean I suppose ? As the been was still in there but the whole white rope was out. Unlucky enough it happened 5 minutes apart (first and second rubber) on a 1200 gun. Was told by the spearfishing shop that it happened sometimes with those factory blue beans. Great gun other than that !
Sorry about that, we had a bad batch of wishbones go out, since then we have solved the issue.
Very nice Rob.Thnxks
Thank you sir for the explenation it was helpfull
Thank you sir 🎉
Hey rob, can u make a video on how to make roller gun rubbers please
With cheater bridles so there’s no need for a load assist
@@matthewmartich3531 Will do.
Our acorn rope wears out in a few dives. We are changing. Do we re-choke rubber every time the acorn string is damaged? We make a ring by the classical method. We drown the ring in the tire. We tie the acorn rope to this ring. Or we strangle the apparatus that we can attach the acorn rope to. We tie the acorn rope to it
I don't understand the question, I assume this is a google translate?
@@RobAllenSpearfishing ruclips.net/video/luCzKBb3PiI/видео.html
@@RobAllenSpearfishing ruclips.net/video/Tcxz4Ie8CFM/видео.html
Hello from iraq with you great
Hi Rob, thanks for one more great video. I have followed these steps for 16mm bands and work nice, but I had a failure today with my 20mm band. The power of the band forced the wishbone insert to exit out of the loop 1 second or so after loading the gun. I had made the loop quite tight using thick dyneema, and burnt the edges well, but it seems the diameter of the band is still big enough to allow the insert to escape. Do you recommend larger inserts or to tight the loop as strong as possible?
It should not make a difference if the knot is pulled tight enough.
Hey Rob, I have the 1.8 mm white RA Dyneema. Will it do the job or it is better to search for the non hollow core one?
The 1,8mm white RA Dyneema has a core? The hollow core will work better for tying.
Maybe I didn’t express myself correctly. The white 1.8 Dyneema I have is the standard one for spear tying, while the other, which is black and woven like, is not available in my area, and I was wondering if the white one will do the job.
no problem using the standard 1,8mm Dyneema shooting line. @@AleksPetrovProspecting
@@RobAllenSpearfishing Thank you very much for the advice. Much appreciated!
you are welcome @@AleksPetrovProspecting
how do you calculate the length of rubber for different sizes guns? any method or formula of calculation?
Would you say that the beads are much more secure that the dyneema bridle?
Yes but not this does not mean correctly knotted and tied Dyneema knots are insufficient. They do work adequately.
@@RobAllenSpearfishing Thanks my brother.
Thanks. Very helpful video. Now I can make my own bands... @TheJoeltoro1
👍👍
Thank you sir now i knew it
I have my idia.now i know how to tight like this.
Trying to find how to tie the retaining knot above the plastic. Does it have a name?
Si pero no hace muchos años unos 60 y pocos ser zurdo era una especie de defecto que intentaban corregir en la escuela, 😂 me biene bien el supernudo 😂 saludos desde españa 👍👍👍🇺🇾
Escuché esto, tuve suerte de nacer justo después de eso.
Saludos de Sudáfrica.
I heard this, I was luck to be born just after that.
Greatings from South Africa.
Hi Rob, if l file a notch in the middle of a spear on an 1100 roller to make loading easier, how much will it weaken the spear, any other tips?
It would weaken it massively, we never do this as it is very likely to break there then. Much better to use a load assist.
Thank you sir, god bless!
Where can I buy the beads and insert tool? I’m not much of a fabricator lol
Depends where you live, where are you?
@@RobAllenSpearfishing Hawaii
@@alaefarmestatesllc Try Contact our Distributor in Hawaii:
Westside Dive & Tackle
34-614 Kupuohi Street #103
Waipahu, HI 96797
Telephone: (808) 228 2295
Email: kris.westsidedive@gmail.com
Or our Distributor in the US:
Triton X Inc
2500 Del Monte Street, Suite 110
West Sacramento
CA 95691
USA
Phone: +916-371-3441
Toll Free @ 1 877-WETSUIT
Email: sales@tritonx.com
Website: roballendiving.com/triton-x-usa/
Bang klo benang yg ke bersentuhan dgn shaft yg bagus pakai ukuran berapa?
2mm Dyneema.
Hi
The orange dynema is 1.8 mm
But.. what about thé wihte dynema !
Diamètre ? . And long ?
please.. Thanks
The white we sell is 1,9mm in any length up to 500m.
Hi. I like to see your movies. Please don't stop to shoot another video.
But , what I did not know- where I can to buy your products. Thanks.
Hi Michail, on our website roballen.co.za/ check out the list of distributors. If there is not a distributor in your country, email us on sales@divefactory.co.za for orders.
Very nice thanks
Mr. Rob i bought 6 meters rob allen rubber.. Is there any proper way to store it? Afriend of mine told me to put them in the Fridge to save the quality..
Any advise?
Your friend is correct. I'd keep it in a sealed bag in the bottom of the fridge, not made up. It there are any wishbones tied in, this zone will be under stress and will deteriorate. Do not put it in the freezer.
@@RobAllenSpearfishing well noted thank you uncle Rob. Appriciate ur usual support..
Very good brief
Thx
Excelent!!!!!
Is it best to buy the wishbones?
You can make your own but most probably easier to buy.
Why we can’t find even small product of rob Allen like wishbone in Egypt
Have you tried contacting our Distributor in Egypt?
Mohamed Saber
16 Gomaa Moftah, Al Agamy Al Bahri, Dekhela,
Alexandria Govornonate 21500
Egypt
Telephone: +201111130406
Email: ka66em@gmail.com
Facebook: Rob Allen Egypt
Hello Im from indonesia 🇮🇩🇮🇩🇮🇩
Hi.
👌🏻👌🏻👌🏻
ottimo , grazie
Thankyuou
Bloody left handed people, are always the most creative.
😜👍
外国佬就是会玩
10 mins for just a knot
Special knot.