Lian Li Galahad 2 LCD Infinity wiring guide and setup walkthrough
HTML-код
- Опубликовано: 9 июл 2024
- Prawn here with a look at the Lian Li Galahad 2 LCD Infinity All In One liquid cooler. This is the 360mm version of this AIO and here I'm showing you the setup and wiring logic for it while using it in the Lian Li Dynamic Evo XL along with a number of other things. I'm showing you the standard wiring logic as well the process for setting this up with push/pull fans if that's something you want to do.
This is a fantastic all-in-one cooler with an LCD screen that can show Gifs, read outs and much more. It also comes equipped with Lian Li SL-INF fans. Meaning you can add it to your system along with SL-INF 120 fans (or 140s) to make a really nice build.
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Note this is available to buy from the 18th October 2023.
Specs of this build: (note this includes affiliate links that earn me a commission at no extra cost to you)
Motherboard - Asus ROG STRIX Z790-A GAMING WIFI D4 motherboard ( • Asus ROG STRIX Z790-A ... )
CPU - Intel Core i9-13900K (amzn.to/3RWvGrQ)
Case - Lian Li Dynamic Evo XL - • Lian Li Dynamic Evo XL...
Fans - Lian Li SL-INF 140 • Lian Li SL-INF 140 fan...
And Lian Li SL-INF fans ( • How to connect Lian Li... ) (120mm)
CPU cooler - Lian Li Galahad 2 LCD • Lian Li Galahad 2 LCD ...
RAM - Kingston FURY Beast RGB SE 64GB (amzn.to/3NPEuvD)
NVMEs - Crucial T700 (Two 2TB • How to install and tes... )
Crucial P5 Plus 2 TB( • How to install Crucial... )
Crucial P3 Plus 2TB ( • How to install Crucial... )
PSU - Corsair HX1500i PSU ( • Corsair HX1500i instal... )
GPU - Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc)
RGB - Lian Li Strimer Plus V2 ( • Lian Li Strimer Plus V... )
RGB GPU - 600Watt Strimer ( • Lian Li Strimer V2 Plu... )
See deals on the Lian Li Galahad 2 LCD
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Amazon US - amzn.to/3RVvARk
NewEgg - newegg.io/ncee0150c6
CaseKing - tidd.ly/45Bj7VN
Amazon UK - amzn.to/3PQ17Bu
Overclockers - tidd.ly/3sk9DAU
Amazon FR - amzn.to/45uXE0R
Amazon IT - amzn.to/3Fbjrjg
Amazon DE - amzn.to/3FbjsDQ
Amazon CA - amzn.to/46Hq2Ok
Radiator screws
Amazon US - amzn.to/3ZQdou6
Amazon UK - amzn.to/3tvWCo8
Amazon FR - amzn.to/3tlrZl2
Amazon IT - amzn.to/3PVgtVh
Amazon DE - amzn.to/3PUmilE
Amazon CA - amzn.to/3ZPKABS
Corsair USB hub
go.corsair.com/5gM1Pj
NZXT USB Hub:
Amazon US - amzn.to/3IMCCCj
NewEgg - newegg.io/nc03c66b46
Amazon UK - amzn.to/42hZHE4
Amazon FR - amzn.to/3os9xp1
Amazon IT - amzn.to/3MChjVl
Amazon DE - amzn.to/43qswPq
Amazon CA - amzn.to/43xLyDH
Features of the Lian Li Galahad II LCD include:
2.88” IPS LCD display 480 x 480 resolution able to display CPU temperature, CPU
load, GPU temperature, GPU load, coolant temperature. As well as gifs, PNGs, MP4s and more
Asetek’s 8th Gen Water Pump - latest Asetek 8 th gen water pump that delivers up to
2°C/100W improvement over its 7 th generation predecessor. Includes 3-phase motor for higher flow and quieter operation at 3600 RPM
45-degree Rotary Fittings for adjustable pump tubes
Thick rad design - 30mm thick radiators feature a single-wave radiator fin design of 20 FPI which is less airflow restrictive, resulting in excellent thermal performance when paired with lower static pressure fans.
SL Infinity fans:
UNI FAN SL INFINITY 360 Fan Specifications
Size 122.1mm x 120mm x 25mm
Fan Speed 2100 RPM (Max)
Static Pressure 2.66 mmH2O (Max.)
Airflow 61.3 CFM (Max.)
Acoustic Noise 29 dB(A)
Bearing Type Fluid Dynamic Bearing (FDB)
Specs of the cooler
Pump Speed 3600 RPM
Radiator fins Single wave
LCD Type IPS
Display Size 2.88 inch
Resolution 480 x 480 pixels
Fan Size 123 x 120 x 25mm
Fan Speed 2450 RPM (Max.)
Static Pressure 3.26 mmH2O (Max.)
Airflow 79.9.1 CFM (Max.)
Acoustic Noise 30 dB(A)
Bearing Type Fluid Dynamic Bearing (FDB)
Compatible CPU Sockets
Intel: LGA 1700 / 1200 / 115x
AMD: AM5 / AM4
Warranty 6 years warranty
🏆Big thanks to my super awesome RUclips members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Riggs79, Mike S, Jay Shank 007, Jason Morgan, Starastin, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson, Lank Wimb and Gaming Nomad. - Игры
Note this is available to buy from the 18th October 2023.
Specs of this build: (note this includes affiliate links that earn me a commission at no extra cost to you)
Motherboard - Asus ROG STRIX Z790-A GAMING WIFI D4 motherboard (ruclips.net/video/2IQCnkzKtps/видео.html)
CPU - Intel Core i9-13900K (amzn.to/3RWvGrQ)
Case - Lian Li Dynamic Evo XL - ruclips.net/video/RjUwRy6FOs8/видео.html
Fans - Lian Li SL-INF 140 ruclips.net/video/6HUpX6v1qTE/видео.html
And Lian Li SL-INF fans (ruclips.net/video/W_ApiN_Wueg/видео.html) (120mm)
CPU cooler - Lian Li Galahad 2 LCD ruclips.net/video/Mxm_29mWr9Y/видео.html
RAM - Kingston FURY Beast RGB SE 64GB (amzn.to/3NPEuvD)
NVMEs - Crucial T700 (Two 2TB ruclips.net/video/B08Cv8Pb9nI/видео.html)
Crucial P5 Plus 2 TB(ruclips.net/video/YjOyCB7Vqjw/видео.html)
Crucial P3 Plus 2TB (ruclips.net/video/YPSnnKGYl54/видео.html)
PSU - Corsair HX1500i PSU (ruclips.net/video/kq2B2HKNjRY/видео.html)
GPU - Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc)
RGB - Lian Li Strimer Plus V2 (ruclips.net/video/OTnzx75cw3s/видео.html)
RGB GPU - 600Watt Strimer (ruclips.net/video/SjOyo2H69vw/видео.html)
Can you help me by reviewing my parts for a future build
By the way I’m subbed
Dude, thanks for this video. And your others. Showing all these different scenarios, etc. I just ordered the long screws you linked. I have a similar build I’m attempting to do. Still waiting on more parts.
Best video ever for anyone who plans to build a computer😀
I am not a newbie but these tutorial videos are always welcome because new stuff come along all the time
Thank you for the effort you put into this
Glad it helped!
First I'd like to say how much your vids have helped me in my Lian Li EVO XL build. Everything was coming together until I got the Lian LI LCD cooler installed, I have had a not so user friendly experience with this and L-Connect3 working the way it is supposed to. After two very frustrating weeks of trying everything that I read from other people having the same problem and watching a zillion RUclips vids I finally got everything working the way it was supposed to, ( the LCD Block was the main culprit, not working with the software).
Anyhow, I finally got almost everything working with the exception of one thing that I hope that you might be able to help me with. My setup is the LL Lcd cooler in a push pull configuration attached to top, three 120mm fans attached to side, three 140mm fans attached to bottom and two 120mm fans attached to back. I have the two series of fans from cooler attached to the controller that came with aio. I also have the three side fans and the 3 bottom fans connected to the same controller. This fills up the controller, so I used the other controller that came with the 3 pack to hook up the two back fans to it.
My problem is when I go into L-Connect3 to set up the fans in a rgb lighting configuration all of the rgb lighting effect that I chose works on all of the fans except the two back fans that are hooked up to the controller that came with the 3 pack. I'm sure it is some sort of connection that I haven't done right, but at this point I'm so frustrated with this cooler and software I can't even think about what to connect or disconnect!
If you have any suggestions or if you need more info from me about set up I would GREATLY appreciate it! I really enjoy your vids, it's the voice monotone and the Shrimp! We love our SHRUMMPS here in the Lowcountry!! Thanks again. Ciao
Assuming both controllers are connected via USB, can you see them separately in l connect? You should be able to cycle through them left to right. The lighting sync options in l connect should make all the fans automatically change even if they're on different controllers. The other thing to check is in the settings of l connect, look for a firmware update for the controller.
@@TheProvokedPrawn Thanks for a response, yes they are both connected via USB and I can see them separately. It lets me set a color combo, (I have orange and the light blue) for each fan set on runway, but the two fans in back stay dark blue and red on the strip of mirrors effect and the lighting around the two fans.
I have the latest firmware installed, 0.9 I think it is. The 2 fans in back have the wide connection inserted in the controller that came with the 3 pack and the USB connection is hooked up, also the 2 sata connections coming off the controller are hooked up.
Is there anything else that should be connected to or coming off of that controller? The only other thing is, since I had so many USB 2.0 connections to be made, (have strimmer too), I have the NZXT USB adapter for all of the USB connections from the controllers. Thanks again!
For those of you watching this with LGA 1700 sockets it's the NON dotted screws you have to use. Just FYI!
Thats just what I was about to say
Finally. Been waiting on this and the Deepcool ls720 se digital to drop in the US.
Thanks a million for that video mate, spot on! Just received the exact same product in white but didn’t get far with installing it.
One thing that might turn out differently with an AM5 system is the standoff screws. My manual says LGA 1700 requires the screws without the dots. I’ll know for sure tomorrow 😎😅
I do appreciate your methods of teaching, I have learned a lot. I do wish you could show how to do this without "a dozen" fans and the controller. I have a matx case, one 360 aio, one in end and two on the bottom daisy-chained together. Now do I connect them to the board or the pump?
A life saver video !!! Well worth repeated viewing ! Great job !!! Just one more thing: please, show us how to manage two fan controllers through LianLi Connetct-3 software ! If it is possible, at all?
I would like to see this too. Curious.
I just spent 45 minutes tearing my room apart looking for that "missing cable". The relief when you said its not needed lmao
👍🏼
I was told when doing PC research that the way you have the AIO is actually better then on top but not by a lot but still better that most people just put it on top for aesthetic looks.
ruclips.net/video/qQcyYHGtArs/видео.html
Do we have to use remoo fan control to make a fan curve based on Coolant Temp? I can't believe Lconnect 3 doesn't have coolant sensor as an option.
Love your video!
I have the concern that do unifan that come with this CPU cooler is the same with the lianli infinity V2 fan? Cause i heard that V2 and V1 of SL120 are different and using different controller. Or the V2 are actually a reversed blade of unifan ?
Very informative video. Thank you for the effort.
A quick question tho.
In the video the controller was plugged to the CPU fan head. Does it means all the fans that connect to the controller will run at the same speed? (Faster when CPU get hotter). I have multiple fans that will connect to the controller and i can't imagine how noisy it will get.
Thanks!
Just plug it into a normal fan head.. The L connect software lets u regulate seperate fan groups with speeds.. u can also set a curve seperately for the cpu fans.
Thank you so much for putting these videos together - it really helped a ton! There's one part that I'm confused about though because I bought the Gallahad-II SL-INF version and 3 more SL-INF-120's for push/pull - however, the cables that I got with my 3 pack to connect into the controller are the 6 pin version and not the one that splits out like yours and what comes with the AIO cooler. Where did you get the cables? I can't find them anywhere.
Is it possible to connect an AL 120 V2 (with the wire from the single pack) on the controller from the Gallahad? The plugs fit in but I’m not sure if it works.
Nope, it is an SL controller, unfortunately.
Quick question. What is the default behavior of the LCD screen, if not using the L-connect software? Are all settings only in the software, or are any actually stored in the pump head head?
Can I know what software version you are on? I can’t get the LCD to display or show up in my L connect?
are the tubes quick disconnect? cause it had me confused how the final product tubes were arrange in a way where you must need the tubes to be disconnected and reoriented to have that clean run.
Great video with awesome detail, i am planning a build similar to this, definitely would like to know what the best setup is for the AIO with regards to temps (At the top on exhaust push/pull 6 fans or side on intake push/pull 6 fans for cool air for AIO?) Also orientation of AIO on the side, tubes up or down for which is best for safety.
ruclips.net/video/qQcyYHGtArs/видео.html
1:12 Are the fans actually set up as an exhaust? Just wanna make sure I heard it right because they look like intake setup to me…
I got the non infinity version but i want to use my sl v2s. Im assuming i just dont use the large plug on the pump? Im just going to let l connect control the fans like it already was.
Hello! I have some questions about fan cabling. Did you use the controller that came with the 3-pack fans to connect the fans on the top and on the bottom? If yes, why not use the same controller that came with the AIO, since the 3 pack fans also come with a fan+rgb standard cable? If you were to connect the bottom and top fans along with the pump fans in the same AIO controller, would all of them be binded to the cpu fan speed curve? I am trying to figure out if I'll need to use another controller other than the one that comes the AIO, and what the drawbacks of using only that one would be. Thank you!
You could use the one that comes with the controller just fine. Though obviously only up to four groups. So you only have three spare when you've connected the fans from the rad. But that's fine
If I have the galahad 2 lcd and two triple packs can I make it all work or do I need single packs?
So the AIO Pump will run just by the PWM connector and the LCD/rgb stuff is controllable via L-connect by just plugging the USB cable to the motherboard?
Question, if i use the AIO controller, can i plug there also other case fans? and if from the controller i plug directly on the mobo do i still need to use the Usb connector?
wait so does the Lian Li Galahad II Trinity 360 come with a fan controller ?
Can the SL 120-V2 use the same controler? In the package for SL120V2 you also get the same PWM+ARGB cable
So if I want the galahad 2 lcd and 4 additional uni fan sl-140s, and 3 additional sl-120s, I have to buy the sl-140s individually and a 3pk of 120s, and run both L-connect controllers in my case?
So I'm planning on a new pc build, and I don't know if I'm just being stupid but I would like to get the Galahad 2 LCD for the top of my case, then a 3 pack of infinity uni fans for front intake, and then 1 uni fan in the back for exhaust, will that work? Or do I need to buy all the uni fans as 1 packs for it to work?
thanks you sir 🤩👍
I just ordered the non-Inf version of this AIO... is it worth adding the money for the inf version with the controller? is the SL-INF fans performance better? I dont care that much about the RGB effects but if fans performance is worth paying more I can switch to the INF version still...
Can you use the old l-connect hub for the aio radiator fans, or is it incompatible?
how can I connect the single pack sl inf fans to the controller the aio comes with since the rgb cable for single pack is for motherboard and I want to connect to the aio fan controller. (Im trying to connect three more groups of fans)
Im trying to find PSU extensions for my build but my 3080ti needs 3 8 pins, and it seems like most cable mods only comes with 2, do u have any alternative recommendations for that ? or do i have to buy 2 packs
Wait so the extra fan cable that comes with the the single to connect a trio fan to the same controller as the cooler. Do I need to buy another cable to add a 2nd trio fan?
Am I in trouble if I’m running 2 sets of 3 pack SL120 V2 and a solo SL120v2 to the new hub for the new fans?
Will I have issues? I feel like I will need 3 USB connections on my motherboard unless I can connect everything to one controller… Ideally I’d be able to do this with only two USB connections needed.
I have an old Lian-Li controller for the previous generation of SL120 fans. Will that work better than the new three pack hub?
Can you show the process on how to use these fans with the Galahad II infinity 360 LCD and the Strimer plus v2 etc. As this video is still confusing
Is there any way to switch the BLACK Cable of the single Fan on the backside to a White Color? I want to re-create this system but this cable color is ruining the whole build for me...
So if I’m planning on using the L connect software to control all the fans and rgb, I don’t need that additional split rgb/pwm fan cable in the controller right? Just the usb? I also plan on having 4 groups of fans on this one controller, will all the fans be controlled with the l connect software without the need to plug into a fan header ? Any help would be greatly appreciated. Trying to figure this out for like a week now
Do I need the controller if I take the fans off and swap them out for something else?
Hey I can’t find the part where you solve the problem of having the triple pack of fans work with the aio? Is there a time stamp?
The video help me build my setup.... tks...very detail!!!
On thing that I cant make work, is that setup of 360 aio lcd galaga 2 with new model device and setup with 3 x triple packs inf 120mm device... For some reason the wire ship it tougher with lcd aio wont conect half of the 2nd fan and dont light up the 3rd. in the radiator.
Do you have any ideas? suggestion?
this video has the cable at 0:25sec,
Prawn, question, what position in the EVO XL do you recommend installing the Motherboard when using this AIO with 420mm fans along the bottom and side panel of the case as well as 2 EA 120mm SL Uni's back? Should I go for the middle position (I see there are 3 choices?)? I'm assuming the cables will be long enough to route them behind the mobo and into the USB 2.0 header.
THANK YOU, so very much for showing the difference between the two L-Connect devices because I was very confused and still am a little bit…
So if I have two extra reverse SL INF fans and one SL INF exhaust fan (all going in the (Lian Li 216) I would just have to plug them up separately and not with the daisy chain?? Also, does the L-Connect software not work when the fans aren’t connect to a L-Connect Hub????
First time builder and I’m so confused. All this stuff arrives on Wednesday and I won’t have the extra L-Connect hub if I will need it
Anyone know if I can daisy chain two 3pks and a single infinity fan into the AIO cooler? Or is there not enough ports on the AIO controller?
I'm confused at the step 4:48. I don't have the individual fan controller you have the tutorial with.
My separate triple fan has the connection as shown before but how do you connect the AIO separate two pins to the standard controller that has four 7-pin inputs and two rgb connections?? I connected the RGB but the fan power has the ground on the opposite end of the power connections as the AIO Pump power does so I can't connect it to the normal CPU fan slots.
J’ai une question je peux connecter mon watercooling galahad 360 sur le splitter des ventilos ?
On my manual it says that the screws for the cpu are the one with out dots are for lga 1700 also it didn’t come with the fan cable so I went out and bought one from a local pc shop
Same as mine homie
Same
Same
Can i use the control for the infinity fans instead of the galahad lcd controller. The connectors for infinity are thinner and are not split.
Did you ever figure this out?
Would love to see a video on how you connected multiple fan hubs!
ruclips.net/video/RjUwRy6FOs8/видео.html
24:15 can you show how the other fans are controlled by same controller because i cant seem to figure it out
Hello, I’ll start to congratulate for your excellent and explicit videos, so many info you provide but I still have i question if you have time to to respond.
The cable which is coming out from the controller to a cpu fan header on the motherboard is a must or is optional ??
Thank you in advance
PS : “great voice on the video”
Very educational vid. Since the cable to the controller is different then the sl infinity triple pack can we switch the cable on the Galahad to the same as the triple pack to run on 1 controller instead of having 2 controllers
I want to know this too
It’ll work fine if you use an extra cable from the 3 pack of infinity fans. The only difference is the controller. Since the controller doesn’t plug directly to the aio it doesn’t matter which controller you use.
I have the same AIO. My question is. Is that aio's controller enought for.the 7 reverse blade i bought? They dont have reverse.infinity pack in here. Please answer. ❤❤❤❤
The thing is a friend of mine is making a build and just kinda finished it, his pc works. But the fans on his AIO cooling are not working, does anyone know what might be a common issue here bcs all the cables are corretly installed
Can 3 140mm fans fits on the bottom of the nzxt h9 elite
Hi,
"after the screws with the dots" you use a LGA1700 then it should be exactly the other screws according to the instructions I am a bit confused
I'm a human that makes mistakes apparently
Question what powers the pump to spin I was also using a sata power but this video says its not needed
The connection to the motherboard AIO pump or CPU header
So if I buy the cooler and buy six infinity reversed blade fans and one standard infinityfan, does it bring the correct cables to daisy chain them to the aio controller ? @TheProvokedPrawn
Ypur videos on lian li are awesome. But im in the situation where the connectors are differnt from the aio controler so i have 2 controllers but you mentioned you were going to cover that but i didnt see it or missed it. Im kind of stuck with differnt connectors and not sure what to do
Great description! Thank you,. Wish I would have found this before I spent about 45 mins trying to understand the wring, and the manual. That plug that is not needed for the Infinity version was baffling me. >
Would it be possible to use the cables that come with the 3 pack (7-pin) on the fans of the aio? Wouldn't that eliminate the need of two controllers?
That it will.
Will the strix with strimmers fit in there
I wonder if it fits a Lian Li Lancool II Mesh ATX Mid Tower Case
Hey prawn...you make really nice videos....can you suggest an alternative for Corsair 680x?
O11 dynamic xl will do? And what's the latest lian li cpu cooler
Corsair has just released the 6500 which is meant to be the new 680x. I personally like the Evo XL and the Galahad 2 LCD
@@TheProvokedPrawn thanks for the reply sir. Your videos are so high quality and they educate on almost all topics i wanna learn about these rgb fan control boxes. Keep rocking!!!
So I have to buy a bunch of single fans and not the triple pack for it to work with the aio control box?
You can use the triple pack controller instead if you like
Is the Fan PWN control based on Water or CPU Temperature?
Prawn. You are an absolute legend.
Been getting wound up all day at the idea of lian li 3 pack and aio connections being different. Ill be using these.
So the way around using just 1 controller for lian li is use the aio one with a bunch of singles, not 3 packs?
my LCD keeps disconnecting and connecting again and it does the sound like if you were pulling out an flash usb, every cable is clicked and secured in place but i wonder if i should also connect the cable on that port next to the usb type c
are you sure the LCD's USB-C cable is fully plugged in? it seems very easy to not fully seat (I made that mistake). Also check for firmware updates as Lian Li has released several since.
Umm im sure someone has pointed out but the screws you used to tighten the AIO over the CPU are the wrong one
The manual shows that you need the non-dotted ones for the LGA 1700
Aio is plugged in correct fan is plugged int fan header correct. Everything works. Bios doesn’t recognize cpu fan. What is the fix
Great video. I am building a new PC with the GA II lcd sl-inf 360 and the sl-inf 120 gans for the case. What i need to know is which way the air flows through the fans. Last PC i built, my case fans all had an arrow on them to show air flow direction through the fan. On these fans, there is the mirror side and the side with the design.
The mirror side is the pull side (intake)
Could you use the v2 controller to control the pump
Both my usb ports are taken up by the two lian li controllers. Could i hook up the lian li lcd screen to the nzxt usb hub?
ive tryed it yes it works but the screen isnt as bright for me
So my manual for MB said the CPU fan was on the right side and pump left however on the MB it’s pump left and cpu right
Which one is correct haha
I can connect ARGB, fans directly to the motherboard?
So you said that all of your non radiator fans are controlled by a separate lian-li fan hub, but that you could plug case fans into the same hub used for the radiator fans.
But you plugged the radiator fan controller into the cpu fan header on the motherboard, so if you plugged them into that controller, wouldnt the motherboard then control all of your case fans based on cpu temp? If you adjust the curve in the Lian-Li software, does it take precedence over the motherboard controlling the speed?
Pc part picker flags a disclaimer on the clearance of this pump with the ram on the z790a Maximus 1700 motherboard, why?
I have a question on the fan setup. First off thank you so much for your videos, you have helped me tremendously in my first build. Cheers to you mate. Anyway, i have am building my first computer and have gotten everything else working correctly.. except my AIO and 3 vertical fan stack. I'm using the Lian Li Galahad 2 LCD Infinity + all Lian Li Infinity Fans. I have all of the fans connected to the AIO controller with the 2 power cords (compared to the thinner flat single power cord alternative). My fan sets are:
1. 2 140 fans daisychained on bottom of case
2. 3 120 fans daisychained vertically
3. AIO 3 120 fans mounted on the radiator (default)
4. 1 120 fan solo on back of case
When all are plugged in, i get the AIO screen to turn on, but otherwise no power/RGB to the AIO fans. Also the 3 120 vertical fans are off and no RGB. But the 1 120 fan and the 2 140 fans turn on fine. First build so I'm not super experienced. The only thing i can think of from watching your videos is I'm potentially overloading the AIO controller? i need to use the 3 stack fan controller as well with most of the other system fans potentially with the single flat thin power cable feeding into it to lessen whats put into the AIO controller? Which that may fix my problem there, but i still havent been able to get the AIO fans on/RGB even when it's the only thing plugged into the AIO controller. Super confused on what my issue could be. Any further clarification needed please let me know. Thanks for all that you do!
Man!
You mfde my day
I aim to please
If I purchased the regular Galahad 2 lcd but wanted to use inf I had before can I install those and have no issues with the normal controller or did I need to buy the AIO with the inf fans with the controller that has usb c?
You should be fine
so sad just bought and found out my hyte Y70 case won’t fit this what’s a better case to use?
I have a Hyte Y70 Touch and the Lian Li Galahad II 360 Inf and it fit fine for me.
If I want to use TL fans I would just be connecting the pump header and USB for the screen on the cooler and then rolling with the TL fan installation as nornal right ? One controller that comes with the LCD 3 pack and then single fans daisy chained, correct ? This is the same AIO that comes with the INF or Regular fans right ? So since I'm planning on swapping out fans no sense in spending the extra for the INF fans.
For the first part of your question the answer is yes. I didn't understand the second question.
Hi I got the Lian Li Galahad II LCD but i can't record any mp4 and set it as background. I am able to start recording and pause but after clicking import nothing happen. Anyone can help?
So I found out my lian li o11 evo has slight clearance issue for the bracket so you CAN'T just open the back and take the old and put the new in...
But if you sync fan power to motherboard solely through that bottom cable on the controller, you can't control speeds separately for each fan group-only altogether, right? The motherboard software won't be able to distinguish between the ports AFAIK, and treats them as a single fan group.
So, I'm thinking that instead, I can give each fan group power directly from the motherboard CHA headers, and only plug in the RGB cables to the controller.
This way, I can get full control over the speed of each fan group through FanXpert, and also full control of RGB through L-connect.
@TheProvokedPrawn I was looking at getting this but also want need reverse fans for the which only come in single packs so wouldn't have the SL-Infinity hub that comes in the standard 3 pack. Been looking everywhere and can't seem the find out how many of those ARGB Header adapters come with this AIO to plug into the controller that comes with the AIO. How many do you get? Because I would need to use all 4 groups so would need 3 of them.
four
@@TheProvokedPrawn thank you can now actually order my parts haha without the worry
Can you use this AIO in the Evo Dynamic case I see almost no builds with this aio and using the evo dynamic
Yes of course. I used it in the RGB version which is newer but it would fit in the Dynamic Evo and other cases that can handle a 360mm rad. ruclips.net/video/c-0WW77_fM8/видео.html
@@TheProvokedPrawn thanks a lot
I'm actually planning on heading to my local MicroCenter and picking up the remaining parts for my new build, and I *was* looking at the Lian Li Galahad II 360 for $189....and now I see this one. Worth the upgrade for $40 next week?
Jc is it $40 more there? 😂
I really wanted it, but it's double the price of the galahad 2 360 inf I got. $275 aud vs $505 aud.
If it was 20% it would've been a no brainer ☠️
What i dont understand is that there are two different fan controllers right? In one of your other videos ive seen that the Controller was a bit different. The one in this Video connects a group of fans with one cable. The other one need two per group.
Which one should i use? I want to install the galahad 2 sl inf 360 trinity and 3 fans on the bottom on the front and one fan on the rear of my case.
The Galahad 2 LCD comes with an older style of controller for some reason which uses the single fan cable connections. But you can use the SL infinity controller you get with a triple pack instead if it's easier.
@@TheProvokedPrawn do i need to get the new controller? Or does it work with the older one?
At 2:14 you mention the cable is plugged into the AIO pump on the motherboard. If you motherboard does not have that connector, what do I use instead? I have a Gigabyte A520M-ds4h v1 and it only has 4 pin CPU fan and 4 pin Sys fan connectors. Not sure which one to use with which plug.
CPU fan
Thank you. And then the rest of the fan controls are plugged in via the hub, correct? I am connecting (2) additional 3 fan infinity segments and they will also plug into the hub as well correct? I don’t have any interest in controlling fans from the motherboard, only through the L connect 3 software.
How is the performance of it? Like im thinking about changing my aio and im confused between this and the corsair icuelink H150i
I'm doing a review soon but the experience has been good so far
Hey, love your videos!
I got a quick question though: Just to clarify, you are using 2 separate controllers right? The one that comes with the AIO (which is only connected to the AIO?) as well as a controller which came with a pack of 3 fans (which have all other system-cooling fans connected to it?).
I'm not very knowledgeable so I thought I'd ask just to make sure, as I'm planning on building my first PC soon and intend on having a very similar fan setup, just in a different case.
Thanks, and sorry if its an obvious question!
Yes
Thank you@@TheProvokedPrawn
I’m just so confused, I have the GA trinity 2 with the SL-INF fans and all of my actual fan RGBs work but my top fan on that was with the AIO only the outer ring RGB won’t work. I bought a single fan to replace it thinking it was the fan and it’s still doing it. I have messed with the settings with the software and noticed when I’m clicking what I think was showing the positions of what fan was what, and the outer ring would light up blue; then it would go back to the setting I had it on and turn directly back off. So it shows the lights laughing up if that makes sense but they won’t stay on. Someone pls help 😭
Correct me if im wrong but is the aio, strimers, lian li fans, and the aio fans altogether 5 usb ports?
A lot are used. But this can help. ruclips.net/video/d8vELbWWaCQ/видео.html
So can I use the 3 pack infinity fans with the controller that comes with the AIO or can I only use them with the controller that comes with the 3 pack?
Depends on whether you get the single or triple packs ruclips.net/video/W_ApiN_Wueg/видео.html
@@TheProvokedPrawn I want to buy the AIO and then buy a triple pack and was wondering if the fans from the triple pack could connect into the controller that comes with the AIO. Not sure if this is possible even after watching the video you linked or if im better off just buying 4 singles
How do you turn on the lcd?
I downloaded the software but see no option to turn it on.
LCD turns on in the bios but shuts off before windows.
Try this drive.google.com/drive/folders/1U0G2UCRM7XZWXLgjreQ0tjSidTVpW3wh?usp=drive_link
So do you have 2 controllers for the since the triple pack cant connect into the aio controller
You can use the standard controller instead. As long as the pump is connected to AIO Pump or CPU fan and had the USB connection it's fine
I have this same issue on the app it doesn’t display the lcd setting so the lcd is just blank
On 2:01 do you need that the one next to the usb c or no?
Not with this cooler.