Great step by step video, shocked you didn't use gloves working with gas and even more shocked you didn't vacuum up all of the debris before opening the caps.
to make it easier to get the hose through tie a string to the end of the old pump hose and pull it thru the fuel pump side and connect to the new pump and pull it back through to the sending unit side
Good video but shocked you didn't shop vac all of the debris before opening up the caps and why you didn't wear gloves when working with fuel. I definitely would have used the string method Shelton mentioned.
A shop vac would have been cool but I work mobile so I don’t carry one. Sometimes I just don’t feel like wearing them, and the string method is definitely a good idea.
I have the same problem with my Rogue. I've been told the fuel temp sensor is built into the pump and can't be replaced on it's own and the whole pump needs to be replaced.
Hello. I have 2 questions for you. I have a nissan qashqai 2017 benzene. They told me that i have a problem with may pump and i need to replace it. 1 question : have you unplug the battery? Have you need to reprogramming the car ( like that the the car known that you have a new pump)? Someone told me that but iam not sure if it's true
No I didn’t disconnect the battery but I is recommended! I didn’t have to reprogram it but it did take almost an hour to get it to run right so they might be right, I didn’t see anything about that when I was trying to figure out why it was taking so long to run correctly.
@2EZEverything damn I needed help(paid of course) lol and your good ...I'm not a mechanic not even close how hard on a scale do you think this job is ...
@@marcohvac8902 the hardest part is removing the seats, when you disconnect the line on the left side tie a sting onto it so you can pull the string to the other side when you are pulling the the pump out on the right side, use that same string to connect to the new pump long line and pull it back through
Great step by step video, shocked you didn't use gloves working with gas and even more shocked you didn't vacuum up all of the debris before opening the caps.
to make it easier to get the hose through tie a string to the end of the old pump hose and pull it thru the fuel pump side and connect to the new pump and pull it back through to the sending unit side
Great idea!
This was very helpful because it showed me that I just need a fuel level sensor instead of a fuel pump assembly
Good video but shocked you didn't shop vac all of the debris before opening up the caps and why you didn't wear gloves when working with fuel. I definitely would have used the string method Shelton mentioned.
A shop vac would have been cool but I work mobile so I don’t carry one. Sometimes I just don’t feel like wearing them, and the string method is definitely a good idea.
Do you know why this fuel pump failed or what happened before it failed?
wow good job my friend...is it the same for rogue 2017? how many bars for the pump pressure?
I believe it is the same for the 2017, usually fuel line pressures are around 35-50 psi
Great explanation. Can you share me a link for this fuel pump.
What is the malfunction caused by the Fit Beam and why we are forced to replace it with a 2017 Nissan Rogue Sport?
Is this the same for 2018 nissan rogue sport sv awd?
hi, friend. good video. Where is the fuel filter on this Nissan? greetings
It is built into the pump assembly
thanks friend @@2EZEverything
I was told to keep fuel tank near full it keeps the pump cool if you run tank to low it can over heat the pump 😮
Hi, can you tell me the name of the tool that you used for the video? Thks
Hi, I have a Fuel Pump Temperature Sensor fault - delar told me. Is that located in fuel pump? Or fuel pump level sensor side?
I have the same problem with my Rogue. I've been told the fuel temp sensor is built into the pump and can't be replaced on it's own and the whole pump needs to be replaced.
NICELY DONE!!!!!!
Thank you!
Hello. I have 2 questions for you. I have a nissan qashqai 2017 benzene. They told me that i have a problem with may pump and i need to replace it. 1 question : have you unplug the battery?
Have you need to reprogramming the car ( like that the the car known that you have a new pump)? Someone told me that but iam not sure if it's true
No I didn’t disconnect the battery but I is recommended!
I didn’t have to reprogram it but it did take almost an hour to get it to run right so they might be right, I didn’t see anything about that when I was trying to figure out why it was taking so long to run correctly.
I've replaced fuel pump but still the engine light is on. Could you please help me with? Thanks
Did you clear the codes then see what came back?
Are you in florida
No
@2EZEverything damn I needed help(paid of course) lol and your good ...I'm not a mechanic not even close how hard on a scale do you think this job is ...
@@marcohvac8902 the hardest part is removing the seats, when you disconnect the line on the left side tie a sting onto it so you can pull the string to the other side when you are pulling the the pump out on the right side, use that same string to connect to the new pump long line and pull it back through
Why not just vacuum instead of the brush?
I’m a mobile mechanic, so having a vacuum isn’t really practical for me.
Y yo que pensaba, que mi auto está muy sucio, ya veo que los ahí que me ganan.
You need to clean the fk car use a vacuum cleaner
What is the malfunction caused by the Fit Beam and why we are forced to replace it with a 2017 Nissan Rogue Sport?