in the back of the head there is a bolt on plug , weld a block of ali too that , then chuck the internal end in a lathe and bore it out too suit you distributor on the back of the cam , unbolt the reluctor wheel and weld a 19mm ? socket too it ( or similar ) chop a slot in that , bolt it back on too the cam and your done .. its all documented here www.jbnz.co.nz/yabbse/index.php?topic=32094.75
Very nice work sir
May I please have some information on how did you hook up the distributor and adapter plate
Thanks a million
in the back of the head there is a bolt on plug ,
weld a block of ali too that , then chuck the internal end in a lathe and bore it out too suit you distributor
on the back of the cam , unbolt the reluctor wheel and weld a 19mm ? socket too it ( or similar )
chop a slot in that , bolt it back on too the cam and your done ..
its all documented here www.jbnz.co.nz/yabbse/index.php?topic=32094.75
@mohawkc77 thank you very much for the information hope I can get it's done before summer, winter here right now in canada
are you putting it in a boat ?
@@dainguyen-xe8un
@@mohawkc77 yes its gonna going my 12 feet jet boat
I'm a full-time welder. If it run I will sent the cylinder head to machine shop and get porting