Thanks! I’ve actually developed it. I’ve been testing and tweaking it and it’s nearly ready for production. I’ll make a channel announcement when I launch it officially. Today was the soft launch to preview it.
Haven't seen you paint in quite a while. So glad to see this. Awesome job, as always! So many questions, but, as a fellow craft paint painter... what do you use to prime? I use Vallajo primer airbrushed on and handling my models like you do, unless I clear coat with a rattle can matte clear, the paints tend to scratch or rub off too easily. If I was handling him like you were, Garfield would have been bald by the end of that video! 🤠
For this I just used a rattle can. I have started using upol automotive sandable primer you can get at an auto parts store. It covers good and easy to sand.
great video as usual, sign up for the course, just curious is your note book available to the public to purchase, thanks keep up the amazing work you do for the 3d enthusiasts,
Thanks! I’ve developed the tester. I’ve been testing and tweaking it and it’s nearly ready for production. I’ll make a channel announcement when I launch it officially. Today was the soft launch to preview it.
Not yet I will be soon. I’ve been testing and tweaking it and it’s nearly ready for production. I’ll make a channel announcement when I launch it officially. Today was the soft launch to preview it.
Your videos on using Bambu Studio got me started 3D printing, gonna try and “paint” a terminator bust using my X1C this weekend! Thx so much for making those videos.
That’s awesome. You might want to try out some rub n buff for that. I did a video showing how. ruclips.net/video/eFxpr5ZAjAo/видео.htmlsi=1It6t2RNDvnIfWZu
@@ItsMeaDMaDe Indeed Thanks a lot for the videos , they are very helpful I got encouraged to start printing and painting by the " Sonic the Hedgehog " and " The Thing " print painting videos you posted I began with a Sonic Diorama , it turned out awesome
It doesn't have to be. I have one nice, single-action Badger I've had for years, but for most all of my (craft paint) painting, I have three cheap chinese airbrushes that I got off temu. I got a set of needles for them so one is 0.2, one is 0.3 and one is 0.5mm. Those three airbrushes, plus the needles (from temu, too) cost about $70 total, but I bought them one at a time. The air compressor is a Master compressor from Amazon for about $90. So for less than $125, you can get started and you will wonder how you ever did without it! Plus it's fun, too 🤠
@@rebeltaz123 I will definitely consider buying one in the future It would definitely help a lot But for now , 120 dollars are a lot considering I'm still a med student , and it would be better spent on printing 3D files (I don't have a printer, I use my friend's printer)
Ahh yes, adding orange to orange to make orange. Brown is a myth, its just dark orange. You also accidently did perfect color theory with the stripes, black fur is just very dark orange fur.... Unless you knew already... You mad man
It’s not up for sale yet. I am in production right now of them and hoping to get them out by the end of the month. I’ll be making announcements when they are ready for sale.
This is off subject but needing help badly. New to 3d printing and P1S, my P1S got here today. Got a big problem that I need some help with. I have A1Mini and use BL studio / Handy app account with no problems. But can't get the P1S to sink with my BL studio / Handy app account. What do I need to do to correct this. I uninstall Handy App still nothing. Now both printers don't syn with Handy App and BL studios nothing.
Nice work. Where can I find psi rangefinder to check viscosity?
Thanks! I’ve actually developed it. I’ve been testing and tweaking it and it’s nearly ready for production. I’ll make a channel announcement when I launch it officially. Today was the soft launch to preview it.
@@ItsMeaDMaDe It was impressive to me as well!
Haven't seen you paint in quite a while. So glad to see this. Awesome job, as always! So many questions, but, as a fellow craft paint painter... what do you use to prime? I use Vallajo primer airbrushed on and handling my models like you do, unless I clear coat with a rattle can matte clear, the paints tend to scratch or rub off too easily. If I was handling him like you were, Garfield would have been bald by the end of that video! 🤠
For this I just used a rattle can. I have started using upol automotive sandable primer you can get at an auto parts store. It covers good and easy to sand.
Great job! Love this.
Thanks so much! Glad you liked it.
great video as usual, sign up for the course, just curious is your note book available to the public to purchase,
thanks keep up the amazing work you do for the 3d enthusiasts,
Awesome. Glad you liked it. The link to my log book is in my description to my Etsy store.
Great work. Where can I find the MeaDMaDe psi rangefinder to check viscosity?
Thanks! I’ve developed the tester. I’ve been testing and tweaking it and it’s nearly ready for production. I’ll make a channel announcement when I launch it officially. Today was the soft launch to preview it.
Do you sell the Airbrush PSI Range Finder?
Not yet I will be soon. I’ve been testing and tweaking it and it’s nearly ready for production. I’ll make a channel announcement when I launch it officially. Today was the soft launch to preview it.
Where’d you get your printing/painting book/log??
Your videos on using Bambu Studio got me started 3D printing, gonna try and “paint” a terminator bust using my X1C this weekend! Thx so much for making those videos.
That’s awesome. You might want to try out some rub n buff for that. I did a video showing how.
ruclips.net/video/eFxpr5ZAjAo/видео.htmlsi=1It6t2RNDvnIfWZu
@@ItsMeaDMaDe thank you
Airbrush is just too expensive for me
I'll have to stick to regular brushes
I even use the acrylic paint as primer
Yeah I realize it’s not for everyone. But you can still get some great stuff with a brush.
@@ItsMeaDMaDe Indeed
Thanks a lot for the videos , they are very helpful
I got encouraged to start printing and painting by the " Sonic the Hedgehog " and " The Thing " print painting videos you posted
I began with a Sonic Diorama , it turned out awesome
@JadAwwad that’s awesome I’m glad I could help you out.
It doesn't have to be. I have one nice, single-action Badger I've had for years, but for most all of my (craft paint) painting, I have three cheap chinese airbrushes that I got off temu. I got a set of needles for them so one is 0.2, one is 0.3 and one is 0.5mm. Those three airbrushes, plus the needles (from temu, too) cost about $70 total, but I bought them one at a time. The air compressor is a Master compressor from Amazon for about $90. So for less than $125, you can get started and you will wonder how you ever did without it! Plus it's fun, too 🤠
@@rebeltaz123
I will definitely consider buying one in the future
It would definitely help a lot
But for now , 120 dollars are a lot considering I'm still a med student , and it would be better spent on printing 3D files (I don't have a printer, I use my friend's printer)
Ahh yes, adding orange to orange to make orange. Brown is a myth, its just dark orange.
You also accidently did perfect color theory with the stripes, black fur is just very dark orange fur.... Unless you knew already... You mad man
🤣 yeah I wasn’t even going to open that can of worms talking about brown. 😅
I can't find your airbrush psi range finder. Can you give me a link? Thanks
It’s not up for sale yet. I am in production right now of them and hoping to get them out by the end of the month. I’ll be making announcements when they are ready for sale.
Great Video! Looking forward to your airbrush course. Where can I get that log book?
I have a link to my Etsy store in the description!
This is off subject but needing help badly.
New to 3d printing and P1S, my P1S got here today. Got a big problem that I need some help with.
I have A1Mini and use BL studio / Handy app account with no problems. But can't get the P1S to sink with my BL studio / Handy app account. What do I need to do to correct this. I uninstall Handy App still nothing. Now both printers don't syn with Handy App and BL studios nothing.
Soon to be obsolete by the new inkjet 3D printer.. that thing is awesome.
Where did you get the notebook?
You can get it through my Etsy store link in the description
@@ItsMeaDMaDethanks, just ordered!
Your audio seems to be a little off on this video.