My 1st gun was a gat. Loved it, took it everywhere, camping n everything. My ma bought me one when i was about 12, i used about 400 pellets the 1st day shooting anythin and everything nothing bigger than moths or big shed spiders. Usual low power affair, but a little later my uncles older gat that he had when he was a kid, and was at least double the power, i dont know why. I then came in contact with a lad who had his dads 1978. 22 original mod. 5 air pistol in 1994 i bought it for £20 after school. That had a fair old whack to it. I then got back into airguns in 2010 when i bought an umarex colt special combat co2, which i loved n is still in the gun cabinet looking pretty. I later bought a crosman 1377 which i modded with flat top valve n piston which i later sold and missed. I then bought. 177 hatsan supercharger great powerful gun and very accurate as well. I then got hold of a mk3. 177 webley alecto accurate n powerful. I then got another crosman but a. 22 version the 1322 to tinker with n change to a backpacker survival carbine/rifle with survival kit and extra ammo inside the stock, 3-9x40 illuminated scope, ultrafire flashlight and moderator. Took me a while to do and cost a bit as well, but has never left the house. I just shoot in my indoor range. I then bought a compound bow which is now just a wall hange which i cant shoot indoors, and Iam now into a pistol crossbow phase much to my wifes annoyance. i just finished turning a horizone red back in to a backpacker crossbow which has never left the house also, i can shoot that indoors though. Well i could do up until my wife and daughter and myself were confined to the house in lockdown . My wife dreads my birthdays and xmas as i usually always want "something that fires something." All the best from lancashire, and stay safe.
Love it mate! Sounds just like my childhood, I used to put live match heads in the barrel so it looked like I was firing tracer out of my bedroom window at night! 😂
@sauceNkicks Hi there, no a G10 and The Gat were 2 different guns. The G10 had a shape more like a M1911 and you could load steel 4.5mm BBs in an internal magazine in the muzzle and cock as a repeater but could fire darts and pellets single shot, whereas the Gat had to be loaded from the rear with pellets and darts by unscrewing a a steel pin and placing your pellet or dart and push it in with the pin and screw it back up. It could even fire small corks from the front and was single shot, and appeared in many old school fair grounds with the corks as ammo. Every time you fired it, the plunger shot out the muzzle firing the chosen ammo, and then the front had to be pushed back into the muzzle and loaded again from the rear for your next shot. Always great fun though. All the best from Lancashire.
Growing up I was lucky enough to live close to the Webley factory (Frankley, Birmingham), the show room was amazing and the staff so friendly. Loved going there as a kid!
Wow , great Review Neil , nice to have you doing a review on this Glock . I've got a few of these and a pellet belt fed Sig Sauer P320 . Looking forward to your next review. Hope your ok 👌
A nice nostalgic moment at the beginning. Had gotten myself up to 25 co2 replica pistols until I finally got myself my first pneumatic pistol, the Beeman P17. Good to have such a piece when wanna shoot just a wee bit and save up a co2 cartridge... Personally not a huge Glock fan, but I love the co2 replica pistols with a magazine like this one. Surely a bit shorter slide movement, but they usually kick like a sob and does shoot pretty hard. My ISSC M22 actually kicked so hard the original locking starlock ring around the firing pin broke..😁 PS. That small split end on the included Allen key is to lock the trigger on some pistols (as the ISSC M22). The key is kinda generic for airpistols with a mag like this but all pistols do not have the trigger locking ability.
My first gun was a Gat, loved it. It went everywhere with me, school, playing out never without it! Just had a screw for putting in the pellets and I used my palm to cock it. Them were the day’s 😂🤟😢
I just purchased the Gen 5, love the small design changes, the bevelled front looks better and the slider looks more blues than powder coated, these changes work for me over the gen 4 and previous. Yes I would like the slide to load the bb’s however I’m assuming this two stage trigger is there to give you more bang for your buck instead of the blowback taking some of that precious gas! So I can live with that. It also gives out more FPS and foot poundage, which the box oddly states otherwise, apparently the gen 4 is more powerful, this is not the case. HOWEVER, the loose fitting none field strip slide does rattle just by rotating your hand left to right, drives me nuts it really does. How... Why...Umarex, you were so close to making the gen 5 the best glock Co2/BB to date, but the slide let’s it down. I’m still trying to think of a way to fix this but if I don’t I will have to live with it and see where that takes me. Oh and btw, umarex needs to work on that stupid Safety also, so hard to move if you don’t have fingers i like a five year old.
You can fix the rattle. Just remove the slide and put a tiny piece of paper or i used piece of sponge just under the barrel. There's a video in youtube showing where to put it.
awwww the Gat Gun. Our Uncle gave us one and it drove my Mum nuts. So much fun with that thing. That and the black widow catapult i managed to get off a naughty kid at school, so much fun.
Great review Neil, is definitely a cool looking pistol, the Gen4 Blowback has always been the standard to beat,it would be interesting to compare the two,although the CO2 loading on the Gen4 was always a pain,but i do like the look of the Gen5,i can see a space in my cabinet right now.!!
I like it ... I like it alot , unfortunately the local RFD is shut , so its out with the Artamis pp700 ( too fix ) and then in the garden for some plinking / target fun ... great review btw ... very informative
Should load using the empty biro pen trick bro lol getting one this Tuesday 7.3.22 great video buddy this review helped me choose 😁 recently brought glock 17 g4 dual ammo and I LOVE ❤ it
One thing that I've noticed right away is that the slide on this new Gen 5 sounds very much like the Glock Gen 3 (tin can sound), and I really don't like that. My Gen 4 doesn't sound like that. @4:05 That Sig Sauer M17 is a piece of crap. I wish I hadn't bought one. I put it back in its box after only a week. The only thing going for it is the look. Everything else was a big disappointment. Very low FPS, very low number of shots per CO2 cartridge, only double-action (slide blowback doesn't cock the hammer for single action), very notchy trigger feel, awful accuracy (despite having a riffled barrel), takes a long time to load the chain magazine, you lose a little precious CO2 gas each time you remove the magazine, the slide doesn't lock back on empty mag. Definitely not worth the price, unless you only want a great-looking replica.
I don't like the location of the safety. I had a laser mounted on it but it would slide off due to recoil so I had to fix in place properly by screwing on a metal piece for my laser but now I can't easily access the safety. Basically due to its location it encourages you not to use it!
Hi, I’ve recently purchased the Glock 17 Gen 5 Co2 pistol, every time I load the small Co2 capsule and turn the crew to tighten the bottle, all the gas comes out. I have made sure that i don’t over tighten the screw, however, once the Co2 bottle is pierced, all the gas comes out. I’ve already lost 4 bottles trying to get the pistol to operate. Do you have any ideas. Thanks
If they could make a better slide that doesnt sound like cheep pot metal i would buy this gun , and pay more , but they need to find a way to make it sound like quality steal instead of clanky aluminum , but with that said i have the Barreta APX and its slide is clanky and the spring is weak but it shoots amazing , so form over function is a balancing act and we need to pick our battles i guess .
been watching your channel for while great channel whats the deal on gun license in the uk is it hard to acquire if you got the time to let me know thanks brother
Hi buddy, well airgun wise anything above 12flb in power requires a firearms licence, shotgun requires a shotgun licence or SGC. Powder burners ie rimfire and centre fire require a firearms license or FAC. Police do background checks etc and for firearms you need to be in a club or have access to land for hunting.
RACKNLOAD yeah i herd rules there are sticky kinda like canada i went through all the trouble of going to get my restricted for handguns never shoot cause you have to be at a range or part of a club i wont renew mine sold off my hand guns we have no self deffense laws so i just stick to hunting now but thats interesting thanks for the info i am always curious on other countries
Hi, My magazine is jammed and wont come out when the mag release is pressed. even the trigger is extremely hard to press. Any help would be appreciated
i ordered one for 40000/- rupees in india it will be delivered by tomorrow or day after i really don’t know which one i am getting like the 6mm white bbs or the 4.5mm steel bbs i really hope its the steel bbs or my money will be wasted 🤞🏻
Hi There If your looking for a higher quality replica with more real features , Airsoft version made by vfc are really nice. If you want something ultra premium then ghk Glock 17 is available soon. Forged steel slide. Steel parts. About $400 when released. Hope you all keep safe.
Are they really finally going to be available can’t find any information that’s new they loook and sound sweet they will shoot lead or steel as well right?
My berretta apx is has that rattle too but believe it or not it shoots better then some of my more expensive guns , so it might be a great shooter if you can get past the cheep pot metel slide sound .
The gen 5 is shit. I've got the gen 4 full blowback, much better quality and looking. Gen 5 only half blowback and has slide rattle plus the grip not as nice as gen 4
![NEW [ UMAREX ] GLOCK 17 GEN 5 Co2 PELLET PISTOL 🤯 [ LICENSED ] by Glock](http://i.ytimg.com/vi/5eAjUU1wwG0/mqdefault.jpg)
My 1st gun was a gat. Loved it, took it everywhere, camping n everything. My ma bought me one when i was about 12, i used about 400 pellets the 1st day shooting anythin and everything nothing bigger than moths or big shed spiders. Usual low power affair, but a little later my uncles older gat that he had when he was a kid, and was at least double the power, i dont know why. I then came in contact with a lad who had his dads 1978. 22 original mod. 5 air pistol in 1994 i bought it for £20 after school. That had a fair old whack to it. I then got back into airguns in 2010 when i bought an umarex colt special combat co2, which i loved n is still in the gun cabinet looking pretty. I later bought a crosman 1377 which i modded with flat top valve n piston which i later sold and missed. I then bought. 177 hatsan supercharger great powerful gun and very accurate as well. I then got hold of a mk3. 177 webley alecto accurate n powerful. I then got another crosman but a. 22 version the 1322 to tinker with n change to a backpacker survival carbine/rifle with survival kit and extra ammo inside the stock, 3-9x40 illuminated scope, ultrafire flashlight and moderator. Took me a while to do and cost a bit as well, but has never left the house. I just shoot in my indoor range. I then bought a compound bow which is now just a wall hange which i cant shoot indoors, and Iam now into a pistol crossbow phase much to my wifes annoyance. i just finished turning a horizone red back in to a backpacker crossbow which has never left the house also, i can shoot that indoors though. Well i could do up until my wife and daughter and myself were confined to the house in lockdown . My wife dreads my birthdays and xmas as i usually always want "something that fires something." All the best from lancashire, and stay safe.
Love it mate! Sounds just like my childhood, I used to put live match heads in the barrel so it looked like I was firing tracer out of my bedroom window at night! 😂
@@racknload Ha ha quality.
Do you remember if it was a g10 gat. I vaguely remember mine being called a gat
@sauceNkicks Hi there, no a G10 and The Gat were 2 different guns. The G10 had a shape more like a M1911 and you could load steel 4.5mm BBs in an internal magazine in the muzzle and cock as a repeater but could fire darts and pellets single shot, whereas the Gat had to be loaded from the rear with pellets and darts by unscrewing a a steel pin and placing your pellet or dart and push it in with the pin and screw it back up. It could even fire small corks from the front and was single shot, and appeared in many old school fair grounds with the corks as ammo. Every time you fired it, the plunger shot out the muzzle firing the chosen ammo, and then the front had to be pushed back into the muzzle and loaded again from the rear for your next shot. Always great fun though. All the best from Lancashire.
@topshot2787 oh ok. It brought me back k to my youth hearing that.
Growing up I was lucky enough to live close to the Webley factory (Frankley, Birmingham), the show room was amazing and the staff so friendly. Loved going there as a kid!
Just ordered a GLOCK 17
Excellent weapon and highly accurate
I like the fact that it's realistic blowback, even if it does waste a little bit more gas. One for action air surely.
Wow , great Review Neil , nice to have you doing a review on this Glock . I've got a few of these and a pellet belt fed Sig Sauer P320 . Looking forward to your next review. Hope your ok 👌
A nice nostalgic moment at the beginning.
Had gotten myself up to 25 co2 replica pistols until I finally got myself my first pneumatic pistol, the Beeman P17. Good to have such a piece when wanna shoot just a wee bit and save up a co2 cartridge...
Personally not a huge Glock fan, but I love the co2 replica pistols with a magazine like this one. Surely a bit shorter slide movement, but they usually kick like a sob and does shoot pretty hard. My ISSC M22 actually kicked so hard the original locking starlock ring around the firing pin broke..😁
PS. That small split end on the included Allen key is to lock the trigger on some pistols (as the ISSC M22). The key is kinda generic for airpistols with a mag like this but all pistols do not have the trigger locking ability.
Wembley hurricane is the pistol you were thinking of. That glock looks fun.
My first gun was a Gat, loved it. It went everywhere with me, school, playing out never without it! Just had a screw for putting in the pellets and I used my palm to cock it. Them were the day’s 😂🤟😢
What's a gat
The smell when shooting it... Ahhh.... Memories! Darts were fun too.
I looked at the gen 5 glock but the rattle slide put me off I went for the gen 4 much better.
I just purchased the Gen 5, love the small design changes, the bevelled front looks better and the slider looks more blues than powder coated, these changes work for me over the gen 4 and previous. Yes I would like the slide to load the bb’s however I’m assuming this two stage trigger is there to give you more bang for your buck instead of the blowback taking some of that precious gas! So I can live with that. It also gives out more FPS and foot poundage, which the box oddly states otherwise, apparently the gen 4 is more powerful, this is not the case. HOWEVER, the loose fitting none field strip slide does rattle just by rotating your hand left to right, drives me nuts it really does. How... Why...Umarex, you were so close to making the gen 5 the best glock Co2/BB to date, but the slide let’s it down. I’m still trying to think of a way to fix this but if I don’t I will have to live with it and see where that takes me. Oh and btw, umarex needs to work on that stupid Safety also, so hard to move if you don’t have fingers i like a five year old.
You can fix the rattle. Just remove the slide and put a tiny piece of paper or i used piece of sponge just under the barrel. There's a video in youtube showing where to put it.
@@jackotrades50can u show me the vídeo pls?
@@untipo11 ruclips.net/video/th8SSR_q0bg/видео.htmlsi=dnRdiVCISxxtHHU8
awwww the Gat Gun. Our Uncle gave us one and it drove my Mum nuts. So much fun with that thing. That and the black widow catapult i managed to get off a naughty kid at school, so much fun.
Great review Neil, is definitely a cool looking pistol, the Gen4 Blowback has always been the standard to beat,it would be interesting to compare the two,although the CO2 loading on the Gen4 was always a pain,but i do like the look of the Gen5,i can see a space in my cabinet right now.!!
Can you do a review on the Gen 4? From what i've heard it's far better quality than the Gen 5?
yes, the gen 4 is the best replica! the only downsides on the gen 4 is the accuracy and that they didn’t put a glock cover on the bottom of the mag
@@FlameSpittinQ
The latest production run has added that bottom plate to the magazine.
i absouletely love my gen 4 glock 17
I like it ... I like it alot , unfortunately the local RFD is shut , so its out with the Artamis pp700 ( too fix ) and then in the garden for some plinking / target fun ... great review btw ... very informative
Should load using the empty biro pen trick bro lol getting one this Tuesday 7.3.22 great video buddy this review helped me choose 😁 recently brought glock 17 g4 dual ammo and I LOVE ❤ it
One thing that I've noticed right away is that the slide on this new Gen 5 sounds very much like the Glock Gen 3 (tin can sound), and I really don't like that. My Gen 4 doesn't sound like that.
@4:05 That Sig Sauer M17 is a piece of crap. I wish I hadn't bought one. I put it back in its box after only a week. The only thing going for it is the look. Everything else was a big disappointment. Very low FPS, very low number of shots per CO2 cartridge, only double-action (slide blowback doesn't cock the hammer for single action), very notchy trigger feel, awful accuracy (despite having a riffled barrel), takes a long time to load the chain magazine, you lose a little precious CO2 gas each time you remove the magazine, the slide doesn't lock back on empty mag. Definitely not worth the price, unless you only want a great-looking replica.
To each his own. Love the M17 and am adding their custom red dot to it.
@@4x60
As long as you're happy with it, that's the only thing that counts! Enjoy!
I don't like the location of the safety. I had a laser mounted on it but it would slide off due to recoil so I had to fix in place properly by screwing on a metal piece for my laser but now I can't easily access the safety. Basically due to its location it encourages you not to use it!
I was so close to buying a gen4 glock but opted for the Sig Sauer P226 instead. Both amazing fun guns...
Sig Sauer Leaks more CO2 than Jeep leaks oil and transmission fluid
Just ordered myself a Gen4 one of these :D
Good review. Nice one for Bigging up Co2 pistols.
i watching this whilst holding my long barrel glock 17 with a .22lr conversion kit pistol lol
@rackload. I purchased this my only problem is how the hell do you decock it without dry firing it? I've tried everything.
Excellent video thanks 👍
Where is the best place to order Glock 17 gen 4 or 5 blowback co2
I’ve also used the frangiable bbs in these guns as well.
Great review mate, can you remove the slide to 'field strip it'?
Don't think so, couldn't find anything in the manual...
@@racknload thanks for the quick reply, hope you are well during the lockdown.
Yes you can just like real ones cheers
Hi, I’ve recently purchased the Glock 17 Gen 5 Co2 pistol, every time I load the small Co2 capsule and turn the crew to tighten the bottle, all the gas comes out. I have made sure that i don’t over tighten the screw, however, once the Co2 bottle is pierced, all the gas comes out. I’ve already lost 4 bottles trying to get the pistol to operate. Do you have any ideas. Thanks
This is exactly what I was trying to find out in the comments if this happens or not before I buy one 🤦🏾♂️🤦🏾♂️🤦🏾♂️
If they could make a better slide that doesnt sound like cheep pot metal i would buy this gun , and pay more , but they need to find a way to make it sound like quality steal instead of clanky aluminum , but with that said i have the Barreta APX and its slide is clanky and the spring is weak but it shoots amazing , so form over function is a balancing act and we need to pick our battles i guess .
been watching your channel for while great channel whats the deal on gun license in the uk is it hard to acquire if you got the time to let me know thanks brother
Hi buddy, well airgun wise anything above 12flb in power requires a firearms licence, shotgun requires a shotgun licence or SGC. Powder burners ie rimfire and centre fire require a firearms license or FAC. Police do background checks etc and for firearms you need to be in a club or have access to land for hunting.
RACKNLOAD yeah i herd rules there are sticky kinda like canada i went through all the trouble of going to get my restricted for handguns never shoot cause you have to be at a range or part of a club i wont renew mine sold off my hand guns we have no self deffense laws so i just stick to hunting now but thats interesting thanks for the info i am always curious on other countries
Hi, My magazine is jammed and wont come out when the mag release is pressed. even the trigger is extremely hard to press. Any help would be appreciated
British standard army issue SAS use them too 👍
My mag broke where do i get new ones?
i ordered one for 40000/- rupees in india it will be delivered by tomorrow or day after i really don’t know which one i am getting like the 6mm white bbs or the 4.5mm steel bbs i really hope its the steel bbs or my money will be wasted 🤞🏻
Whats the gap for at the bottom of the magazine?
Just got this for Xmas and wish I got the gen 4 now but idc
go for the gen4 better quality
hello can i switch the original sight and put a rmr??
I dont know who would spend the extra money to get the Gen 5.
This half blowback so it saves more
Webley typhoon ?
Hurricane!! It's just come to me lol!
Hi There
If your looking for a higher quality replica with more real features , Airsoft version made by vfc are really nice. If you want something ultra premium then ghk Glock 17 is available soon. Forged steel slide. Steel parts. About $400 when released. Hope you all keep safe.
Are they really finally going to be available can’t find any information that’s new they loook and sound sweet they will shoot lead or steel as well right?
can you field strip the gen5 4.5mm?
SCORPION!
Can i use this in airsoft? With plastics bb?
No, it's .177, plastic BB's are 6mm.....
You can also get blaster 4.5mm plastic bb's, so yes.
The rattle is horrible :(
My berretta apx is has that rattle too but believe it or not it shoots better then some of my more expensive guns , so it might be a great shooter if you can get past the cheep pot metel slide sound .
Gen 4 is better!
CO2 101 Pellgun Oil
The gen 5 is shit. I've got the gen 4 full blowback, much better quality and looking. Gen 5 only half blowback and has slide rattle plus the grip not as nice as gen 4
Bought Gen 4, but due to extreme slide rattle sent it back, very disappointed.
Killing animals is just pathetic.
Bellyaching is pathetic also!