thanks for the video, worked for my 04 galant installing a 7 inch ISO radio unit... i spent half the install time trying to figure out how the metal bracket installed, then i noticed u had the screws at an angle and the bracket backwards to hold the radio in place, funny thing is it works and i did the same. i used the sharp screws that i took off from the orignal Galant radio and screwed them in "snug fit"... another problem is my harness didnt come with a ground so i had to ground it to the metal bracket inside the dash, i checked with a multimeter to make sure the bar was grounded, there are a few more wires using it as ground as well i noticed. other than those 2 things I think your video showed good enough information. thanks for sharing. oh and i left unplugged that other 3 or 4 wire connector, it goes to the upper time LCD. 7 inch is a bit small, now im wondering if the 9 ich android unit would fit in the dash if i chop off and shave some of the faceplate.
Thanks for watching my video. I noticed the ground comes from the antenna wire. You can install the 9 inch screen at the same spot but need to buy the correct panel here www.aliexpress.us/item/3256805271592252.html?spm=a2g0o.productlist.main.3.6d9a1444d20yIG&algo_pvid=479e9f3c-6545-4191-adda-a9e639685ae9&algo_exp_id=479e9f3c-6545-4191-adda-a9e639685ae9-1&pdp_npi=4%40dis%21USD%2139.99%2135.99%21%21%2139.99%2135.99%21%40210318c217065812763314064e356e%2112000033160496003%21sea%21US%210%21AB&curPageLogUid=EzK5OrrFUvXn&utparam-url=scene%3Asearch%7Cquery_from%3A
@@flixmasterz4411 yea i seen that faceplate, but i wasnt sure if its for the top or bottom, it has picture of the lower faceplate with AC control holes but in separate pictures it shows upper dash installed... lol... seller needs to fix it and just show actual product. assuming i was going to instalp a 9 I would first attempt to chop with a dremel the existing faceplate i have since ide have nothing to loose. i seen a diff RUclips video of them doing it with a dremel and came out nice... its kinda old school style before all these people started mass production of custom faceplates
Hey, so I tried installing a aftermarket radio into my 2004 Mitsubishi galant and we got everything set up but there’s no audio, anyone know what it could be? Lmk thanks
@@flixmasterz4411 having the same issue, me & a friend made sure it was playing audio before putting everything back together, we were , 3days pass & now no audio, 2nd time it happened
I did not use speaker wires, because the harness from the unit has all speakers wires marked and all I had to do is match the wires to the Scosche harness, see at 2:45
I used the wire harness [female] dash frame kit [Scosche M102B] so any wire without a matching wire , I just left it unattached, just covered the tips with tape as you can see in the video at 2:47 timeline. ruclips.net/video/MnV8e56-ca0/видео.html
@@flixmasterz4411 hello good sir,i have a 2005 galant , i was getting audio for 2-3 days , then out of no where no more audio, checked all tthe ffuses & wiring seems fine, any solutions? i used a harness
Love to try it, Please share the frame and the cable adapter link to purchase? I already have the universal android 7 inches.Thanks in advance.I leave in Western Australia
For the Female harness, go to www.scosche.com/94-mit-pwr-spk-car-hrn Or go to Amazon and search for "Scosche M102B compatible wire harness", For the frame / dask kit go to www.scosche.com/2008-up-mitsubishi-galant-din-w-pocket-double-din-kit
thanks for the video, worked for my 04 galant installing a 7 inch ISO radio unit... i spent half the install time trying to figure out how the metal bracket installed, then i noticed u had the screws at an angle and the bracket backwards to hold the radio in place, funny thing is it works and i did the same. i used the sharp screws that i took off from the orignal Galant radio and screwed them in "snug fit"... another problem is my harness didnt come with a ground so i had to ground it to the metal bracket inside the dash, i checked with a multimeter to make sure the bar was grounded, there are a few more wires using it as ground as well i noticed. other than those 2 things I think your video showed good enough information. thanks for sharing. oh and i left unplugged that other 3 or 4 wire connector, it goes to the upper time LCD. 7 inch is a bit small, now im wondering if the 9 ich android unit would fit in the dash if i chop off and shave some of the faceplate.
Thanks for watching my video. I noticed the ground comes from the antenna wire. You can install the 9 inch screen at the same spot but need to buy the correct panel here www.aliexpress.us/item/3256805271592252.html?spm=a2g0o.productlist.main.3.6d9a1444d20yIG&algo_pvid=479e9f3c-6545-4191-adda-a9e639685ae9&algo_exp_id=479e9f3c-6545-4191-adda-a9e639685ae9-1&pdp_npi=4%40dis%21USD%2139.99%2135.99%21%21%2139.99%2135.99%21%40210318c217065812763314064e356e%2112000033160496003%21sea%21US%210%21AB&curPageLogUid=EzK5OrrFUvXn&utparam-url=scene%3Asearch%7Cquery_from%3A
@@flixmasterz4411 yea i seen that faceplate, but i wasnt sure if its for the top or bottom, it has picture of the lower faceplate with AC control holes but in separate pictures it shows upper dash installed... lol... seller needs to fix it and just show actual product. assuming i was going to instalp a 9 I would first attempt to chop with a dremel the existing faceplate i have since ide have nothing to loose. i seen a diff RUclips video of them doing it with a dremel and came out nice... its kinda old school style before all these people started mass production of custom faceplates
Hey, so I tried installing a aftermarket radio into my 2004 Mitsubishi galant and we got everything set up but there’s no audio, anyone know what it could be? Lmk thanks
Did you use Scosche M102B compatible wire harness? may be audio wires are not matched up.
@@flixmasterz4411 having the same issue, me & a friend made sure it was playing audio before putting everything back together, we were , 3days pass & now no audio, 2nd time it happened
Hi, what did yoy do with the other car harnes, the one on the right corner? Isn't it the one for the speakers?
I did not use speaker wires, because the harness from the unit has all speakers wires marked and all I had to do is match the wires to the Scosche harness, see at 2:45
Where is the ground wire leading too? I’m trying to do mine but can’t see where to connect it
I used the wire harness [female] dash frame kit [Scosche M102B] so any wire without a matching wire , I just left it unattached, just covered the tips with tape as you can see in the video at 2:47 timeline. ruclips.net/video/MnV8e56-ca0/видео.html
Could you do a link to all parts used if it's not asking too much?
For the Female harnes, go to www.scosche.com/94-mit-pwr-sp...
- For the dask kit go to www.scosche.com/2008-up-mitsu..
@@flixmasterz4411 hello good sir,i have a 2005 galant , i was getting audio for 2-3 days , then out of no where no more audio, checked all tthe ffuses & wiring seems fine, any solutions? i used a harness
Love to try it, Please share the frame and the cable adapter link to purchase? I already have the universal android 7 inches.Thanks in advance.I leave in Western Australia
For the Female harness, go to www.scosche.com/94-mit-pwr-spk-car-hrn
Or go to Amazon and search for "Scosche M102B compatible wire harness",
For the frame / dask kit go to www.scosche.com/2008-up-mitsubishi-galant-din-w-pocket-double-din-kit
What year is the Galant?
Mitsubishi Galant 2007
En donde se encuentran conpañero
How can I get the product?
I got this from Amazon, it is an universal screen 7 inch
Klk