I’ve been using this cleaver with the 90S now for 6 months. Nothing good to report. 1) the cleave angles are horrid. 2) the burns due to the cleave angle don’t OTDR/power meter good. 3) cleaver, machine and case are entirely too big and heavy. 4) the cleaver will unexpectedly and unnecessarily rotate the wheel because the cleaver sucks so bad that the splice machine thinks the wheel needs to be rotated when it simply needs to be thrown in the garbage. In summary, Fuji hasn’t made any good machines since the 62S+ and CT-30 cleaver. The only real problem with the 62S+ was the heater was way too slow.
The correct blade placement is determined by the machine. At which point on the 70S+ will tell you where to put it. The 90S will simply adjust the cleaver for you. If your machine is having issues determining the correct blade height, place the cleaver on a hard surface in front of your vehicles tires. Then place your vehicle in drive. Run over the cleaver once going forwards and once going backwards. If the cleaver is still intact after this process, please repeat until the cleaver is unrecognizably smashed into molecule sized pieces. Then call Fuji and tell them what a pile of garbage the CT-50 is.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I’ve been using this cleaver with the 90S now for 6 months. Nothing good to report. 1) the cleave angles are horrid. 2) the burns due to the cleave angle don’t OTDR/power meter good. 3) cleaver, machine and case are entirely too big and heavy. 4) the cleaver will unexpectedly and unnecessarily rotate the wheel because the cleaver sucks so bad that the splice machine thinks the wheel needs to be rotated when it simply needs to be thrown in the garbage. In summary, Fuji hasn’t made any good machines since the 62S+ and CT-30 cleaver. The only real problem with the 62S+ was the heater was way too slow.
I'm having the exact same cleave angle issues with the CT-50.
Im having the exact same issue !
I have the same problems. Finally decided not to pair cleaver with splicer. To much fuss about nothing.
Totally agree. The only thing makes sense with this cleaver is durability so the technicians don't smash it to bits when stressed out...
Bai 88s di v specific dasdo ki ki a
What is the correct blade position of clevar to cut the wire of fibre
Any position. Right out the box, it's good to go.
how clever blade posistion change ct 08
please someone cant send me link for splice app
Can you help me my ct50 won't open I believe a spring is off do you know what to do to fix it, it won't open nor shut to cleave
Wow! I never heard of that problem before. Unfortunately, I don't have a good answer. Should still be under warranty.
I shipped The CT-50 back the next day after I got it. Could not get a clean cleave.
Right out of the box double check that the glass was stripped properly. ruclips.net/video/x-PiTpG1xnA/видео.html
Please tell me the correct blade posstions in cut the plc spliters
The correct blade placement is determined by the machine. At which point on the 70S+ will tell you where to put it. The 90S will simply adjust the cleaver for you. If your machine is having issues determining the correct blade height, place the cleaver on a hard surface in front of your vehicles tires. Then place your vehicle in drive. Run over the cleaver once going forwards and once going backwards. If the cleaver is still intact after this process, please repeat until the cleaver is unrecognizably smashed into molecule sized pieces. Then call Fuji and tell them what a pile of garbage the CT-50 is.
price ?
why waste time with the old ct30
The old CT-30 is still a cool excellent cleaver!