So for anyone with an ASUS Tuf gaming PC hit ESC and set the protected boot option off on advanced and works like a charm. Thank you for getting me to finally get it. Got it hooked up and can’t wait to check it out after my kids birthday party.
Theoretically...So if I take a hdd from an old laptop (still with OS and files from when last run) I can connect it via USB. Direct boot sequence to this hdd and it would be like starting old laptop?
The IT guy i spoke to said windows will not allow you to use a usb port for booting. I had the same problem. He said you have to use a sata cable and connect internally.
So when you change the boot order it will now boot to the USB Hard Drive if one is plugged into USB. If nothing is present in the USB port I assume it will boot to your internal hard drive? Thanks in advance!
@@KostakiFilms Not sure if you already found the answer about it but just in case, @7:54-8:09 of this vid says it will automatically recognize the internal if no USB hard drive is connected. ruclips.net/video/jiivZr9A100/видео.htmlsi=3Pqe7jiQSlFwMdPG
I had this problem after upgrading to version 36. Remove all HDD plug it straight in alone still doesn’t work. Turn out it was my graphic card wasn’t supported in Batocera Linux once switch over. 😂
I'm trying this with a HP elitedesk 705 G4. It did work the first time, but when I booted up a second time, it went to windows 11. I went to boot settings (F9) and chose my external drive, but it booted to windows again. What am I doing wrong when it worked the first time?
i did the entire process but later shut the computer down.... but now on start up it doesnt pic the haird disk right away i have to repeat the process everytime ???
Typically 33 or 35 I have several different images so I go back and forth. I haven't tried 36 yet. Not a huge fan of updates as they usually don't do much but mess up existing game collections.
I have a laptop's internal HDD converted to external with usb and i've installed batocera on it. But not booting up i've done flashing it with balena itcher also i've tried installiong batocera on it from another batocera installed usb that worked perfect
Did you ever get this working? Converting SSDs into internal/external doesn't matter. They are the same thing, one just uses a SATA/USB adapter. Anyway, I'm encountering the same issue. I've made a Windows/Linux dual boot before which had no issue. The difference is, back then I used a disk partition tool to allocate space on a single SSD in the laptop. I'm running HP Pavilion gaming now, using an external disk to (try to) boot Batocera from. I also used the Balena etcher tool which was recommended, and everything flashed smoothly. I can see from Windows that the drive has Batocera installed. The problem is, no matter what I do in BIOS, it refuses to appear on the boot list. I'm about to try one more thing, which is to disable secure boot.
I've done what you said and disabled sercure boot I got only once a image of batocera for a second and it's loading into windows do you know could be wrong or what I'm doing thanks
For me it works until I disconnect the hard drive and boot into Windows normally, it just resets it to the drive where windows is installed. (MSI z790-i)
Just disconnect the external hard drive and it'll default right back to your os drive or manually go back in and just change the boot order back to the internal option
@@wpinke on a Mini P.c. you don't have Much choice. Agreed It works on main P.c. but I've been seeing vids of it working on the same mini P.c. as I have & am trying to use it with
i got it to boot up but the olny issue is that are sound issues on ps1, saturn and dreamcast. Not on the lower or higher end systems. Also, i tried this on my medion laptop but in the boot menu it does not show the hard drive.
Based on my experience atleast windows 10 wont boot from a usb drive. Ive trying it and it's a no go. According to the IT guy windows wont allow a usb external boot
So for anyone with an ASUS Tuf gaming PC hit ESC and set the protected boot option off on advanced and works like a charm. Thank you for getting me to finally get it. Got it hooked up and can’t wait to check it out after my kids birthday party.
Thanks for the info. Also, I liked how your HD looked like an old school cassette.
The cassette design looks like my vast collection of ZX Spectrum and Commodore Plus/4 tapes!
Exactly what I was looking for!!! And straight to the point. Thanks
Glad it worked out
Theoretically...So if I take a hdd from an old laptop (still with OS and files from when last run) I can connect it via USB. Direct boot sequence to this hdd and it would be like starting old laptop?
Yep
But in my case in bios my external drive isn't showing @@OfficialChaseBrogan
Even when I change the boot order to the external , it still boots from the internal hard drive not the external, not sure why
The IT guy i spoke to said windows will not allow you to use a usb port for booting. I had the same problem. He said you have to use a sata cable and connect internally.
Thank you so much!!I was struggling to setup the boot order
Love this kind of content 🎉
Glad to hear it!
Thank you so much I was having trouble with this for an hour thank you so much ❤
Glad it helped!
So when you change the boot order it will now boot to the USB Hard Drive if one is plugged into USB. If nothing is present in the USB port I assume it will boot to your internal hard drive? Thanks in advance!
Can anyone confirm this?
@@KostakiFilms Not sure if you already found the answer about it but just in case, @7:54-8:09 of this vid says it will automatically recognize the internal if no USB hard drive is connected. ruclips.net/video/jiivZr9A100/видео.htmlsi=3Pqe7jiQSlFwMdPG
You are a wizard harry!!!
💀💀💀
Does this work for a ssdd card too?
can you make a batocera build image with games for the Orange pi 5 ?
I had this problem after upgrading to version 36. Remove all HDD plug it straight in alone still doesn’t work. Turn out it was my graphic card wasn’t supported in Batocera Linux once switch over. 😂
I'm trying this with a HP elitedesk 705 G4. It did work the first time, but when I booted up a second time, it went to windows 11. I went to boot settings (F9) and chose my external drive, but it booted to windows again. What am I doing wrong when it worked the first time?
Even when i did what it says it still did not work any further assistance would be greatful
i did the entire process but later shut the computer down.... but now on start up it doesnt pic the haird disk right away i have to repeat the process everytime ???
I jave an Alienware PC how do i boot ot in bios ? I changed the order for the drive for it but still takes me to my regular pc
Can I Play the KinHank 2TB Games Console with 2 Controllers on my TV?
what version of batocera do you use, and what size image is it
Typically 33 or 35 I have several different images so I go back and forth. I haven't tried 36 yet. Not a huge fan of updates as they usually don't do much but mess up existing game collections.
@@OfficialChaseBrogan my favorite is v33z. Had issues with v35. Light gun for v36 is pretty amazing
Can you just access it from my computer and just click on the hard drive and go on it that way
NO
@@domcizek why the caps ??
I have a laptop's internal HDD converted to external with usb and i've installed batocera on it. But not booting up i've done flashing it with balena itcher also i've tried installiong batocera on it from another batocera installed usb that worked perfect
Did you ever get this working? Converting SSDs into internal/external doesn't matter. They are the same thing, one just uses a SATA/USB adapter. Anyway, I'm encountering the same issue. I've made a Windows/Linux dual boot before which had no issue. The difference is, back then I used a disk partition tool to allocate space on a single SSD in the laptop. I'm running HP Pavilion gaming now, using an external disk to (try to) boot Batocera from. I also used the Balena etcher tool which was recommended, and everything flashed smoothly. I can see from Windows that the drive has Batocera installed. The problem is, no matter what I do in BIOS, it refuses to appear on the boot list. I'm about to try one more thing, which is to disable secure boot.
I've done what you said and disabled sercure boot I got only once a image of batocera for a second and it's loading into windows do you know could be wrong or what I'm doing thanks
Can you boot the hard drive and use the HDMI?
Which button moves the boot order up in an Acer main board?
I have similar 512 gigs it just stays with batocera image nothing load.
For me it works until I disconnect the hard drive and boot into Windows normally, it just resets it to the drive where windows is installed. (MSI z790-i)
Since we changed the bood order what do I have to do to keep using my regular OS
Just disconnect the external hard drive and it'll default right back to your os drive or manually go back in and just change the boot order back to the internal option
Still having Difficulties doing this with a Ninpogi mini PC. For some reason the Batocera flash screen pops up then the screen just goes blank.
Mine is doing the same thing.
@@wpinke I can't find a solution
@@goldenaxe1986 I believe it may be a graphics card issue as the hard drive works on my old 2007 Toshiba.
@@wpinke on a Mini P.c. you don't have Much choice. Agreed It works on main P.c. but I've been seeing vids of it working on the same mini P.c. as I have & am trying to use it with
Also small retro games shouldn't need much In The way of graphics
what will now happen to the internal hard drive? can you access it when you boot externally?
GO INTO FILES AND FIND IT
i can boot it but not when i am using usb hub can u help with that i have powered usb hub
i got it to boot up but the olny issue is that are sound issues on ps1, saturn and dreamcast. Not on the lower or higher end systems. Also, i tried this on my medion laptop but in the boot menu it does not show the hard drive.
on Hp probook laptops the bios key is esc
Can u do this on laptop
Excellent video
Thanks
Did I do something wrong nou i have a blue BitLocker screen
You have to disable device encryption in settings before you do these steps. You can reenable it when you’re done
I have error verification failed (0x1A) security violation
Please HELP !!!
I just done that on my laptop and that not on there
is there a way to connect this to tv????
💀
How to exit to hard drive
I have an Asus z790 Motherboard anyone know where to disable boot security? Batocera loads up the image but then goes black screen.
I had the same problem. Try a Different older graphic card. Work for me.
DEMOLITON RANCH INTRO MUSIC ?????
Thanks great
Hello
Can i boot a external hd from ps3?
Based on my experience atleast windows 10 wont boot from a usb drive. Ive trying it and it's a no go. According to the IT guy windows wont allow a usb external boot
👍
Batocera can be a real b@tch sometimes