This video will show you how to reset, recover or full factory reset. Reinstall Windows 10 Operating System and check other options. To begin, press the F10 and ALT Keys at the same time when you see the Acer logo at startup.
If you guys experiencing your Windows 10 that is stuck in factory reset. Check this out. Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Unfortunately not working on my pc, are there any other options? I've reset & wiped everything 3x and my pswd login pg os still there. I'd really appreciate your help
I have an acer aspire 3 series and when prompted to do this alt plus f10 i cannot get the screen option for recovery or factory reset . All I get is a blue screen with driver pnp watchdog and keeps doing a full loop of trying to boot up and then blue screen with the same message over and over ...so Alt plus f10 does not work for me.
Why is that boss, after turn off my laptop, i couldnt go to troubkeshoot settings, i been pressing alt + f10 but it didnt work. Will automatically went to windows.
I hade windows 10 home on my swift 3 and I used that offline general key to obtain w10 pro but it says that its not activated Now I only want to have my old w10 home like How I bought the laptop Will this work for me ?
Just wanna ask,if u open the loptop ur in the main screen with all icons visible,then after few seconds it turns black then turn back into the main screen.what should i do?ty in return
So following this tutorial after I hit alt f10 it takes me to the blue screen which only gives two options windows 10 and f3 recovery. So what do I do now?
Thank you :) if it wasn't for the key Kombination in your video I would have activated the jumper to reset my bio password in order to activate the boot manager there.... You saved me a lot of time and trouble 😊
Help whenever I press alt+F10, the screen is stucked in the logo screen with "please wait" caption.. then after a while, the screen will either turn blue/black/recovery. When I press Recovery environment (F1), nothing happens
You might experiencing hardware problems. Blue screen or blue screen of death is an error screen displayed on Windows computers following a fatal system error. It indicates a system crash, in which the operating system has reached a condition where it can no longer operate safely. Your hard drive fails to load the recovery system.
hi.. sorry.. my laptop shows that no bootable device after acer screen. Then when i use usb drive for format purpose, it just stuck at acer logo. Then i found your video saying need to press Alt+F10 key but nothing happen.. What is wrong with my laptop? TIA (I use A315-54 acer laptop)
If rebooting your lalptop doesn't fix the keyboard problem, the problem could be hardware such as your keyboard. Try to use a usb keyboard instead, if it works, i suggest you to replace your laptop's keyboard.
HELP! After updating for windows 10 update, my Laptop keep shutting down after using apps (games, browser) for like 2 to 3 mins. I tried cleaning the ram, discharging but it wont still work it still shutting down.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
This message indicates that your hard drive has a problem when the operating system attempts to read the disk. It means, the disk is preventing the computer from entering into its operating systems. A disk read error could be caused by several factors such as incorrect boot order, BIOS issue, IDE cables failure, faulty hard drive, etc.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
The main cause of automatic repair issue might be the corrupted OS or damaged Windows 10 ISO files. Other factors we can consider such as malfunctioning HDD or missing registry keys. If that happens again, try a hard reboot. Press and hold the power button for 20 seconds and see if it will boot up normally.
Sorry I cant understand your comment so I just translated it to English. Is this correct? My pc won't boot after installing a new operating system. How to do ?
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish. If setup goes beyond 2 to 3 hours, try these steps. 1. Power down the computer. Unplug it, then wait 20 seconds. 2. If you are using a laptop, remove the battery if the option is available. 3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi). 4. Plug it again, ensure it remains disconnected from the Internet then start computer.
This video will show you how to reset, recover or full factory reset. Reinstall Windows 10 Operating System and check other options. To begin, press the F10 and ALT Keys at the same time when you see the Acer logo at startup.
If you guys experiencing your Windows 10 that is stuck in factory reset. Check this out.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
if i factory reset and reinstall windows, do i need installation drive?
Very informative.. thanks dto kc ito kadalsan ngyayari sa mga lappy ngaun.. save ko to boss..
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
Unfortunately not working on my pc, are there any other options? I've reset & wiped everything 3x and my pswd login pg os still there. I'd really appreciate your help
This video tutorial is so clear step by step. Thank you combizz technologies.
Thanks☺️. Please support and share. Stay connected 🙏
Thanks for sharing some information on how to factory reset/restore this laptop. Looking forward for more informatve videos! 💯
Thanks☺️. Please support and share. Stay connected 🙏
Pareho tau technician bro galing may natutunan ulit ako
👍👌 Tnx Bro. Pls keep watching our videos. We will upload more informative videos soon. Stay connected. Tnx
thanks for sharing Kung pano mag restore NG factory reset acel
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
I have an acer aspire 3 series and when prompted to do this alt plus f10 i cannot get the screen option for recovery or factory reset . All I get is a blue screen with driver pnp watchdog and keeps doing a full loop of trying to boot up and then blue screen with the same message over and over ...so Alt plus f10 does not work for me.
I don't Have Recovery Partition, So Alt + F10 is not working...& My acer aspire laptop is stuck At Automatic Repair...How can i reset my PC?
I know this is a year old, but did you ever get it fixed?
Why is that boss, after turn off my laptop, i couldnt go to troubkeshoot settings, i been pressing alt + f10 but it didnt work. Will automatically went to windows.
thanks for sharing kuya jun
Thanks Cris, stay connected.
Hi my PC is turning of and on then I do this do I need WiFi to download windows or does it do it automatically
Salamat bro sa tutorial.
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
I hade windows 10 home on my swift 3 and I used that offline general key to obtain w10 pro but it says that its not activated
Now I only want to have my old w10 home like How I bought the laptop
Will this work for me ?
Just wanna ask,if u open the loptop ur in the main screen with all icons visible,then after few seconds it turns black then turn back into the main screen.what should i do?ty in return
Hi may I know if I reset my laptop would I still have the microsoft office back and my important files?
It depends, if you choose to back up all your files and programs before the recovery process.
great budget laptop and really wonderful presentation and well explained everything :) really good work & thumbs up :)
Thanks☺️. Please support and share. Stay connected 🙏
Thanks☺️. Please support and share. Stay connected 🙏
Combizz Technologies sure thing 👍
So following this tutorial after I hit alt f10 it takes me to the blue screen which only gives two options windows 10 and f3 recovery. So what do I do now?
Thank you :) if it wasn't for the key Kombination in your video I would have activated the jumper to reset my bio password in order to activate the boot manager there....
You saved me a lot of time and trouble 😊
Glad I could help! Thank you.
Help whenever I press alt+F10, the screen is stucked in the logo screen with "please wait" caption.. then after a while, the screen will either turn blue/black/recovery. When I press Recovery environment (F1), nothing happens
You might experiencing hardware problems. Blue screen or blue screen of death is an error screen displayed on Windows computers following a fatal system error. It indicates a system crash, in which the operating system has reached a condition where it can no longer operate safely. Your hard drive fails to load the recovery system.
Thanks☺️. Please support and share. Stay connected 🙏
Thank you po stress na ako Kanina Buti nalang meron to kung wala ayyy magwawaldas na naman nang pera
You're welcome Sir. Glad to help
This works for almost every Acer computer
hi.. sorry.. my laptop shows that no bootable device after acer screen. Then when i use usb drive for format purpose, it just stuck at acer logo. Then i found your video saying need to press Alt+F10 key but nothing happen.. What is wrong with my laptop? TIA (I use A315-54 acer laptop)
Could be hardware issue, Check the hard drive if it is functioning well or detected at the BIOS
Thank you for you comment.
Nice tutorial😊
Thanks Cris, stay connected.
Nice pic beautiful Ginnie day Corina piasy
Thanks! Does this method restore all the OEM software that came with the PC? or it only installs Windows?
Thanks sa info po
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
Thanks for sharing..
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
Techqui .Thanks for sharing.
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
May I ask if rebooting your laptop can also fix the keyboard problem? My keyboard doesn't work and I want to fix it
If rebooting your lalptop doesn't fix the keyboard problem, the problem could be hardware such as your keyboard. Try to use a usb keyboard instead, if it works, i suggest you to replace your laptop's keyboard.
in my acer laptop reset it is showing a tpm settins clear screen and my enter key is not working what should i do plz help
Thanks for sharing.
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
HELP! After updating for windows 10 update, my Laptop keep shutting down after using apps (games, browser) for like 2 to 3 mins. I tried cleaning the ram, discharging but it wont still work it still shutting down.
Hi Sir, try Windows Recovery Option.
i was able to reset my aspire 3. thanks for posting this! 👍
Great to hear! Thank you.
Paano mafix di nagana sakin alt/f10 pero nakapag format na ako nun sa laptop
Does it normally take very long? It’s been almost a whole day and my laptop is still at 45%.
Could be hardware issue, Hard drive or memory.
Thank you for you comment.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Does not work... A disk read error occurred..... only message
This message indicates that your hard drive has a problem when the operating system attempts to read the disk.
It means, the disk is preventing the computer from entering into its operating systems.
A disk read error could be caused by several factors such as incorrect boot order, BIOS issue, IDE cables failure, faulty hard drive, etc.
Thanks for sharing 💯
Thanks☺️. Please support and share. Stay connected 🙏
Tried the steps.. Does it takes more than an hour or 2 to reset? Mine stuck at 45%.
Do you manage to fix it!!!
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
It worked for me thanks
Thanks☺️. Please support and share this video. Stay connected 🙏
I accidentally deleted my recovery partition, can I restore windows using my recovery drive?
Mine goes to preparing automatic repair. Why?
The main cause of automatic repair issue might be the corrupted OS or damaged Windows 10 ISO files. Other factors we can consider such as malfunctioning HDD or missing registry keys.
If that happens again, try a hard reboot.
Press and hold the power button for 20 seconds and see if it will boot up normally.
Thanks☺️. Please support and share. Stay connected 🙏
My Alt + F10 is not working.
Nice info
👍👌Thank you so much po. Pls. Keep watching our videos. Stay connected po. Tnx 😊
It still won't take and keeps spinning, occasionally saying "preparing auto recovery" like it's stuck
Either your OS is corrupted or your HDD malfunction.
Alt + F10 method doesn't work on this computer. :( :( What the heck?
What model and brand of your laptop. Pls check your keyboard keys if they are functioning well.
Thank you for your comment.
doesn't work, tried it 15 times, and yes I have an Acer aspire 3, I hit power then hold alt and F10 but it just boots up normally.
How you install the OS? Is it automatically install the OS?
Thank u .
You’re welcome 😊
Thanks☺️. Please support and share. Stay connected 🙏
Thanks! 🙏🏻
Glad to help. Thank you.
Mujhe reset ka option nahi aata
Mega good 😊 thank you 😊
vai amer ky board line pay kintu kag koray na
Thanks☺️. Please support and share. Stay connected 🙏
how long to wait?
Thanks☺️. Please support and share. Stay connected 🙏
If the said laptop won't let you choose the first choice and would automatically send you to the advance settings what would the best choice now?
What do you do when the reset pc keeps failing?
Good day po. Mabubura din po ba yung nasa dalawang drives ? pano po yung hindi mabubura yung laman ng isang hard drive ?
What do you mean pu ba?
It’s telling me I need a password and I forgot it
Mon pc se démarre pas après installation d'un nouveau système d'exploitation . Comment faire ?
Sorry I cant understand your comment so I just translated it to English. Is this correct?
My pc won't boot after installing a new operating system. How to do ?
Ilang oras bago matapos idol? Hehe wait ko reply mo
Thanks☺️. Please support and share. Stay connected 🙏
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Praise The Almighty Lord and Saviour King Jesus!
How much time it takes to finish 95%. Please tell me
Thanks☺️. Please support and share. Stay connected 🙏
Is this works now ???
I can't even get past the front screen just keeps spinning please help
Could be your HDD fails to load the recovery software. Could be HDD problem
@@CombizzTechnologies do you have have solution for this please
Replace the HDD and get the recovery software from the supplier or manufacturer
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Paano pag ayaw gumana sa Alt + F10?
Ano pong gagawin ko tatlong oras na 42% parin
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
I can't do anything help me pls
Choose : just remove my files
Fully clean the drive
The music doesn't help at all. Where is the narration?
It didn’t work with me
Make sure your laptop is Acer Aspire 3. Thanks
Reset this pc means reseting the windows also
Yes Sir, it quickly restores Windows to its factory default configuration.
Thank you Sir.
The Process so long😥🙁😭
Yeah it takes 45mins - 1hr to complete the process.
Thank you u should get more subs smh
Thanks☺️. Please support and share. Stay connected 🙏
Mine is still 37% its been 2hrs already -_-
Could be hardware issue, Hard drive or memory.
Thank you for you comment.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
By me this is taking so much, after 7 hours 44% 😖
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Yung akin mag dadalawang oras na 37% padin hayop
Could be hardware issue, Hard drive or memory.
Thank you for you comment.
Check to ensure there is disk activity, If you notice that your hard drive LED indicator is blinking, it means that the reset process is still working, so keep waiting and just wait for it to finish.
If setup goes beyond 2 to 3 hours, try these steps.
1. Power down the computer. Unplug it, then wait 20 seconds.
2. If you are using a laptop, remove the battery if the option is available.
3. Disconnect it from the Internet (unplug Ethernet and/or turn off Wi-Fi).
4. Plug it again, ensure it remains disconnected from the Internet then start computer.
Ape togheter strong
complete file will be deleted