INSTALLING SECONDARY DECATS! AUDI RS3 8P (WITH SOUND COMPARISON)
HTML-код
- Опубликовано: 18 дек 2021
- What a day... and evening 🤣 this took way longer than expected. Definitely couldn’t have done it without my dad. 💪🏼
Milltek secondary decats installed, and what a difference, so pleased with the outcome.
Just goes to show you don’t always need a garage to have your work done, just some patience and determination 🤣
Instagram- / autobay_
Facebook- / autobay-102827061411105 
Авто/Мото
Clearly too tired to edit properly after this 🤣 right at the start too 🥴
Shout out to my legend of a dad, poor bloke was laying in the road for about 5 hours with me drilling out rusty bolts, in the winter 🥶🤣 thank you 🙏🏼
Thank you for your very useful video autobay, I’ll make sure to wear my safety goggles👀
You best be wearing your safety goggles on site tomorrow 😎😜
Well done for perseverance.. and Dad … I was thinking back to my late father working on a car in the 1970s and got rust in his eye before you actually did it yourself….. glad you are still enjoying the RS3 … I’ve parked mine in the garage as stuck in my van most of the time …. All the best and have a great Christmas 🎅 👍😎
Thanks very much mate, I really appreciate it. Seems like a common issue when this close to the underside of a car 🤣 I’m still absolutely loving it! I don’t blame you pal, I wish I could do the same, hopefully I’ll have a second vehicle at the start of next year. Have a great Christmas mate 🔥👌🏼
Bout time we had another video. I love your motor even though I’m a Ford man 👍🏻
You’re not wrong mate 🤣 thank you bro 🙏🏼 fords will always have a place in my heart mate 🔥
Well done Bay. Good team work 👏💪x x x
Thanks 😎 dream team xx
Got myself some scorpion decat pipes, not go round to fitting them yet but I can’t wait now, sounds great 👍🏻
Get them fitted mate, the videos don’t do the exhaust justice! So happy with the sound.
Great video as always, I feel I need to do this mod 👍
Thanks very much mate 🔥 it sounds great in person mate, you will not regret it 😎
Feel your pain dude, working in the cold and the dark which I’ve ended up doing quite a few times!
A job you think should take a few hours turns into double the length of time😤
Respect for the work put in though👊🏻
Sounds much better now💪🏻
It’s savage when it’s this cold ain’t it bro, it’s even mor annoying that it’s pitch black at 5pm 😭 it’s always the same when it comes to bolts that snap or won’t come out 🤣 thanks very much bro I really appreciate it 😎 very happy with the sound!!
Hi mate just come across your channel because I’m looking to replace my reg lights on my S3 8V and Iv just watched all your vids from when you did yours. Channel is popping bro keep up the content don’t know how you don’t have more subs 👊🏽👊🏽
How’s it going bro! Thanks so much mate, that honestly means a lot to me. I’ll do my best bro 😎🙏🏼🔥🔥
@@AutoBay doing good bro!! Do you have an IG for your whip? Keep grinding g 👊🏽👊🏽
Well done on the exhausts,
Thank you very much mate 🔥
Sounds amazing mate well done that looked like hard work. Just got mine fitted today and they had to cut every bolt off just like you. They sound great though much better when I’m giving the car some revs. Not sure if It’s me but one of the pipes sounds like it’s got a bit of blowing sound from the front I’ll get it checked over tomorrow. It’s very slight but I’m a right fanny 😂
Thanks very much mate!! Such a great change isn’t it.
I’m just the same as you, any little noise and I get annoyed until it’s sorted 🤣👌🏼 did you use any gaskets when putting the decats in??
@@AutoBay 😂 that’s exactly what I thought mate I’ll ask him tomorrow. I’ll let you know how it goes 👍
Hi buddy,
Good video, and that was some dedication to do. Luckily, I have access to a pit, but can you recall what the clamp part number was as I also need to replace mine ?
Thanks,
James
Was the exhaust standard other than the decat pipes...was it any louder when you put decat pipes on...cheers
Basically a mechanic now;)
Just as well be qualified at this point 🤣😉
I have the decay pipes but after seeing you do it I don't know if I can be bothered doing it on my own hahaha.
I don’t blame you 🤣 it was a pain!
Maaaate you had a nightmare with them bolts 😣 only had one stud go on mine. Another awesome video tho 😎
I know bro those bolts were pissing me right off 🤣🤬 you lucky bastard 🤣 thanks bro!!
@@AutoBay I know I got someone else to do it tho that owns a 4 poster ramp light work lol 😆
pls explain wha tha hammer is gonna do
As I was watching I was thinking he needs to put glasses on...😣.
Well done to u for doing that laying down. NOT ME...F THAT...🤣.
does it have Mway drone?
Hahaha I should’ve remembered to put them on, what an idiot 🤣 thanks a lot bro, really appreciate it. Defo won’t want to do that again for a long time 🤣
Lol...just keep the vids coming
@@lenep9985 sorry bro, I didn’t even answer your question. It does drone a little bit it doesn’t concern me. 😎
Where u got the new clamps?
eBay mate
Standard them things snapping, mine did
Right pain in the ass ain’t it mate, very glad it’s done ☑️
i feel the struggle i had same with my ones .. just cut them like you did ..
Right pain in the ass isn’t it mate 🤣🤣
@@AutoBay defo mate .. nd i thought u no what blow the cats out 🤣 at the time then thought after why did i do that
@@billymaulkin9926 🤣🤣 regrets hahaha
I could see you making that mistake the second you removed the first pipe as you didn't take note of it. Lessons learnt. Next time pop down to your local exhaust garage and get it done there. Thats a 15 - 20min job.
Hahaha definitely mate. Yet going to a garage would mean I’d have no video out of it, and would have had to pay 🤣 there no fun in that! I’ll always avoid going to a garage if I know it’s something I can do myself (even if it takes much longer)
360p crew ☃️🎅❄
That’s when you know you’re early 🤣😉
Decat the downpipe now
Eventually mate I’ll be going for a custom system or BCS power valve (WRC)! Tempting though 🤣