Just used your video tutorial to swap out my PS pump. I'm glad this video clearly demonstrated how much better it is to leave the alternator and accessory bracket attached to the engine. No need to fumble around with removing those additional parts.
You the man!! Got it done and that thing drives smoother than anything I have ever driven!! Very much appreciate your knowledge and willingness to teach!!
Oh man. Your video beats the few other RUclips I’ve watched. Very thorough and clear. Need to know where the pulley removal/install kit is available. I love buying tools. Thank you.
u r great at not only instructions, but as a mechanic. Next time I would just make sure the people know there is a total of 4 bolts holding the power steering pump not 3.
Wish I would of seen this video a couple weeks ago when I replaced my pump on my 2001 Chevy. Didn’t realize I could leave the pressure line on when pulling the pump out. I also made a few other mistakes along the way. I have to take it all apart again, I didn’t bleed it properly now I got air in my pressure line and it’s causing the pressure line to vibrate when turning the wheel. Great video, I appreciate you taking the time to show this job.
I had to replace ps pump on an 07 4.8. It was necessary to remove alternator and bracket with the pump and work on it on the bench. Mine had rotten lines also so I replaced them. Radiator fan on water pump was also removed. Besides that very similar procedure. Thanks for the video.
Awesome video buddy, very detailed instructions, have the exact same issue with my Yukon the pulley snapped of 😯... I hope I have the same luck and everything is simple to remove and replace with no issues 🙏
Outstanding video. Explains everything. I do most of my own work. I did have the power steering pump replaced on my 2010 GMC Sierra 1500 at considerable expense. Pulling the pully on my PS pump had me stumped. $1000 + later it was done by a garage. Thank you for the video. Next time I will give it a try.
Thank you for the video! I had a problem with my steering. I thought it was my rack, I changed it first, still had a problem, drove it around and then my power steering went completely out. Should I also change the cooler as well?
@@KITS_Auto_and_Truck_Repair I changed the pump and it fixed my problem. My steering was vibrating as soon as I would turn the wheel, it shook the whole truck. Never heard of a power steering pump doing that before. But why should I change the cooler? I appreciate the info. But changing the rack and pump both is a hard job! I don’t wanna ever do that again. lol
Does this truck have a power steering control valve? If so, where? My PS works but just turning the wheel in the driveway makes it shake and vibrate. Heard it might be this valve.
@K diagnostics I just completed this job on my 2011 Suburban. I changed the o-ring on the high pressure line and it is pouring fluid from the connection. I took it back loose and checked and rechecked. Put it all back together and it still pours fluid when I start the car. Any help with this is greatly appreciated.
Edad Pops Because when the pump fails the metal shavings from the bad pump will get in the cooler and if you don't replace it those metal shavings will flow back in the new pump which will shorten the life of the new one!
I had 2 different mechanics tell me different things, 1 says it's my rack and pinion the other says it's my power steering pump. I'm used to hearing the pump wine really loud, but in this case it sounds more like a rubbing sound. I'd hate to change the r & p if it's not that
My 2013 Tahoe is splattering power steering oil from behind the pulley, so does the entire pump need to be replaced? If yes, then would you know the part number of the OEM replacement? Thanks!
rss8400 it sounds like the oil is leaking pass the shaft seal, the entire Pump needs to be replaced, I don't have the OEM part number! you can call your local chevy dealer and get it from them!
@@KITS_Auto_and_Truck_Repair hhhmmm was suspecting the same. I am due to get it replaced next week. Any chance I can drive around for a bit until then, it's my only car so, I am struggling with getting around until it is fixed :-/
Ok so dont take this the wrong way but I'm glad the shaft broke off on you. That's great for views cause now people will know what to do if that happens to them
You do not start the engine when bleeding, This will cavitate the pump and potentially damaging the pump. You turn the steering wheel 10 times lock to lock to bleed.(making sure the reservoir remains full) Then start engine and turn steering and check for noise, If noisy, turn off engine and repeat
@@KITS_Auto_and_Truck_Repair And I did like your video, just wanted to add my professional opinion being a Licensed Mechanic and a Hydraulic Technician
One of the best how to video I have seen thank you
@shawnguare My Pleasure! Thanks
Perfect how-to video sir! Good vid, good speed, good voice, very detailed, perfect gentleman. Great job !
Phil Stahl Thank you!!
67kjljjjmj
I agree thankyou so much!!!
Just used your video tutorial to swap out my PS pump. I'm glad this video clearly demonstrated how much better it is to leave the alternator and accessory bracket attached to the engine. No need to fumble around with removing those additional parts.
@DanFilkins Thanks! I'm glad to hear that the video was helpful!
Love your commentary and humor! Thanks!
@gtetost My Pleasure!
You the man!! Got it done and that thing drives smoother than anything I have ever driven!! Very much appreciate your knowledge and willingness to teach!!
I3urner315 My Pleasure! I'm glad to hear that the video was helpful!
2 years later and it's still useful. Thank you bud
kryz cpak My Pleasure!!
Been watching videos to replace mine in my Yukon xl 2010 and yours is by far the best for helping me figure it out. Thanks!
Lee Higginson My Pleasure! I'm glad to hear that!
Oh man. Your video beats the few other RUclips I’ve watched. Very thorough and clear. Need to know where the pulley removal/install kit is available. I love buying tools. Thank you.
Paul Leverenz Thank you! you can buy that tool from Harbor freight!
Great video...now all I need is a garage and more tools ha
@jasondownie8404 Thanks! Hahah
Another excellent video. You are a great asset to all DYI drive way mechanics everywhere.
Peter Martinez thank you!!!
Thanks for the informative tutorial. Im going to try my luck at local pull a part to save some cash. God Bless!
@Wicked_RotF30 Thank you!
I always watch a few videos before tackling a job. Man, this was the best and most simple video by far. Subbed and liked. Keep up the good work.
@rpvilleneuve Thank you and welcome to our youtube community!
I have a 2010 5.3 v8 4wd crew replacing this tomorrow, with your help, as I am somewhat a beginner, I believe I can get this done!
I3urner315 Yes, you can! Good Luck
This guy is very thorough. Thank you sir! ⭐⭐⭐⭐⭐
Brush Hog My Pleasure!!
Nice job explaining how to change power steering pump
Paul K Thank you!
Thank you , i got it changed out on my 2011 Chevrolet Silverado , once again Thank You.
@user-ve9xt4nd1s My Pleasure! I'm glad to hear that the video was helpful
u r great at not only instructions, but as a mechanic. Next time I would just make sure the people know there is a total of 4 bolts holding the power steering pump not 3.
Samantha Betters Thank you!!
Wish I would of seen this video a couple weeks ago when I replaced my pump on my 2001 Chevy. Didn’t realize I could leave the pressure line on when pulling the pump out. I also made a few other mistakes along the way. I have to take it all apart again, I didn’t bleed it properly now I got air in my pressure line and it’s causing the pressure line to vibrate when turning the wheel. Great video, I appreciate you taking the time to show this job.
R GONZALES you're welcome, sorry that you have to do that job again, I'm glad that this video is gonna be helpful
Very Informative and Detailed! Subscribing to Your Channel Youngman
Awesome, excellent instruction. I like the video. Now I know how to do. Thumps up
@jerrycharles1924 Thank you!
Thank you best video I’ve watched on the power steering pump replacement
JIM HARDCASTLE My Pleasure!! Thanks
Awesome video! Wild how that shaft was broken. Thank you
Chris Thank you!!! I don't really know what caused that shaft to break!!!
Thank you for taking the time to share . Nice work...
Carlos Fields My Pleasure!!! thank you!
Thanks for your help! LMK when the store opens💪
@BigNickSnr Thank you for donating to the channel I appreciate you!
Thank you so much. This was a huge help and you have an act for doing these videos professionally!!!
USredflag12 Thank you!
Good video brother. Very detailed and well explained. My pump is leaking so im gonna have to replace it soon and your video will be my tool.
A FROG PISSED YOU OFF I'm the video is helpful
This was my exact problem so this helped me alot!
Caleb Lee I'm glad the video was helpful!!!
Really big help, I saved myself a lot of money. Thanks
777naturalmystic My Pleasure!!
perfect video. hope you make more, step by step, no confusion. awsome, thank!
Daniel Martinez Thank you!!
Thanks! Great job!
@larrysc9110 My Pleasure! Thanks
Splendid, from start to finish, Mr. you are a Pro! I was able to swap mines out no prob
Roxanne Quiroz Thank you!!
Great video, thank you 🙏🏼
@werdna6397 My Pleasure!
I had to replace ps pump on an 07 4.8. It was necessary to remove alternator and bracket with the pump and work on it on the bench. Mine had rotten lines also so I replaced them. Radiator fan on water pump was also removed. Besides that very similar procedure. Thanks for the video.
Don McMillan My Pleasure!!
Big help, thank you! I got the BBB industries pump, it required unscrewing the old studs for the bracket to fit. Couldn't find any info on it at all.
Robert Strauss My Pleasure!!
Great job.
Now I need a floor jacking system
Willie Nichols Jr Thank you!
That is very explicit thank you.
@blommca My Pleasure!
Great tip on the high pressure line! Easier your way!
Harley patriot You're welcome!!
Great video! I was wondering though, what is the reason that the power steering cooler must be replaced?
@JamesOnamaMartinSr Thanks! The metal shavings from the old pump get trapped in the oil cooler then they will destroy the new pump!
Great video!!!
@dylanvail640 Thank you!
Thanks! Very good video. I watched it and will watch it again to prepare to work on my friends 2007 Silverado.
TED GARRISON My Pleasure! I'm glad to hear that the video will be helpful!!
Successfully changed power steering hose. Thanks for the video.
@@tedgarrison3897 My Pleasure!!! I'm so glad to hear that!!
Very good video sir. I have 2013 chevy silverado and I hve alot of pressure on my cap when I have to put fluid in. What would be the cause of that?
Patrick Kluck You might have a blocked or kinked power steering hose!
Thank you for the video very thorough with good video
James Pass My Pleasure! Thanks
You're a fantastic teacher, and an excellent worker. Thank you!
eliprince1 My Pleasure, Thank you!!
Awesome video buddy, very detailed instructions, have the exact same issue with my Yukon the pulley snapped of 😯... I hope I have the same luck and everything is simple to remove and replace with no issues 🙏
Shivam Dipnarine Thank you!!! Good Luck with your truck!!
Very well done this procedure is good for models from 2005 to 2015 i believe .Plus 5.7 also
tony cotta yes it is the same process!!
Good video man!
@hoagiemoto Thank you!
Nice video, very helpful, thank you.
Andy Foster My Pleasure!
Excellent work,, just to clarify..
At 5:40 , you said,
“ when you screw the harder it gets “
Sure I agree 😅
wrenchhead525 HAHAHA!!
Awesome! steps by step pro from start to completion! a solid tons of help from your videos K Diagnostics.Thanks!
Isabelo Saguion Jr You're welcome, I'm glad the videos are helpful...
Excellent video! Very clear instructions. Thanks
Tom Ryan My Pleasure!!
Very informative video! Thank you for sharing!
Jeff Lewis My Pleasure! Thank you!
Outstanding video. Explains everything. I do most of my own work. I did have the power steering pump replaced on my 2010 GMC Sierra 1500 at considerable expense. Pulling the pully on my PS pump had me stumped. $1000 + later it was done by a garage. Thank you for the video. Next time I will give it a try.
Rockland Rhodes you're welcome...
Best video I have seen on here thanks a lot 👍👍👍🔥🔥🔥🔥
@@sylvesterdavis6363 My Pleasure!!! Thanks
Great job, will procedure be the same for Chevy Tahoe 2008 LTZ Flex.???
Kenny Lake Thanks! yes, same procedure!
Great video. Just did my 2009 suburban.
Mc Dingus98 Thank you!!
Hello bud nice video did you use regular Power steering fluid or Ref ATF?
@marlonfb6_raiden662 I used Power steering fluid!
You are the man!!!
@BDlinemanSims Thanks!
Do you used regular power steering fluid or atf fluid ??
Jose Armenta Power Steering fluid!!
Thank you for the video I appreciate it, i have the same year truck and I was able to fix the problem. 🙏🏾😊💯!
MARKO Z You're welcome, and I'm glad to hear that the video was helpful...
Very professional work . Thank you for video !
@VanKravick you're welcome. I appreciate the comment...
This was excellent, thanks for the video!
Terrance A. Traverse My Pleasure!! Thank you!
Did you ck the belt to see if it was dry rotted
Sheila Holder The Belt was ok!
Great video! What I needed.
Advanced Process Service Thank you!!
My rack and pinion is leaking but because my fluid was constantly low, it damaged my pump. I'm going to try to fix it without removing the fan.
Brian Clayborn Sounds good and Good Luck with your Project my Friend!
great vid. would this be the same for an 2007 suburban with the 5.3
Champion Playerdo Thanks! yes it's pretty much the same procedure!
Thank you for the video! I had a problem with my steering. I thought it was my rack, I changed it first, still had a problem, drove it around and then my power steering went completely out. Should I also change the cooler as well?
Shane Barton did you replace the pump? replacing the cooler is also a good idea!!
@@KITS_Auto_and_Truck_Repair I changed the pump and it fixed my problem. My steering was vibrating as soon as I would turn the wheel, it shook the whole truck. Never heard of a power steering pump doing that before. But why should I change the cooler? I appreciate the info. But changing the rack and pump both is a hard job! I don’t wanna ever do that again. lol
@@sbarton6908 Lol!! I'm glad to hear that your truck is fixed!! Good Job!
Super helpful I really appreciate it
Nathan Eddowes My Pleasure!! Thanks!
Does this truck have a power steering control valve? If so, where? My PS works but just turning the wheel in the driveway makes it shake and vibrate. Heard it might be this valve.
@BigNickSnr it's inside the rack and pinion!
@@KITS_Auto_and_Truck_Repair Thanks! I just changed the pump using your vid and all is good!
Very helpful
Walter Pahucki Thank you!
Great video, and instructions very good men
luis soled you're welcome
Is it completely necessary to get wheel's off the ground I don't have lift
Arty Schroeder yes it is!
Dude, thanks it was so clearly explained it helped me tremendously, keep up the good work!!
Crobertg10 you're welcome, I'm glad the video was helpful!!!
I don't currently have the funds for replacing the cooler. What is the danger of not replacing it?
Enrique Garcia the longevity of the new pump can be shortened
@KIT'S Auto and Truck Repair okay thank you. I will be sure to change it as soon as i have the money. Thanks for the quick response.
THANK YOU
JAI M My Pleasure!!
What if you replace the Cooler, do you need to replace the pump? The leak was from the cooler, no evidence of leaks from the pump.
@havencooper9389 you don't need to replace the pump when the cooler is leaking!
Wow this video is very helpful!!ty
pchonsi@yahoo.com thank you
So helpful. Thanks so much.
John Palm you're welcome...
Are you able to just replace the pump? Instead of doing pump and resvoir?
@StrainQS the reservoire comes with the pump!
@@KITS_Auto_and_Truck_RepairI know that but if I were to buy just the pump, can the resvoir be reused?
By any chance did you work at hackberry in Louisiana
pedro abrego No I didn't !
Very good video
Moe leblanc Thank you!!
@K diagnostics I just completed this job on my 2011 Suburban. I changed the o-ring on the high pressure line and it is pouring fluid from the connection. I took it back loose and checked and rechecked. Put it all back together and it still pours fluid when I start the car. Any help with this is greatly appreciated.
Brandon Denson make sure the high pressure fitting on the line is good, or you can replace the line and see what happens!!
Will this progress work on a 2009 Chevrolet suburban 1500?
@DragonZordGarage71150 Yes! it should be the same process!
Thanks
Did you say the cooler should be changed out along with the pump? Why
Edad Pops Because when the pump fails the metal shavings from the bad pump will get in the cooler and if you don't replace it those metal shavings will flow back in the new pump which will shorten the life of the new one!
great video Thanks
Rickie Cotton you're welcome
I had 2 different mechanics tell me different things, 1 says it's my rack and pinion the other says it's my power steering pump. I'm used to hearing the pump wine really loud, but in this case it sounds more like a rubbing sound. I'd hate to change the r & p if it's not that
Randy Marin is the steering wheel hard to turn?
My 2013 Tahoe is splattering power steering oil from behind the pulley, so does the entire pump need to be replaced? If yes, then would you know the part number of the OEM replacement? Thanks!
rss8400 it sounds like the oil is leaking pass the shaft seal, the entire Pump needs to be replaced, I don't have the OEM part number! you can call your local chevy dealer and get it from them!
@@KITS_Auto_and_Truck_Repair hhhmmm was suspecting the same. I am due to get it replaced next week. Any chance I can drive around for a bit until then, it's my only car so, I am struggling with getting around until it is fixed :-/
@@rss8400 hopefully, it doesn't give up on you as you're driving around!! Good Luck!
Thanks..
Marlon Garcia you're welcome
At what age do you recommend flushing the power steering system fluid?
Clay Turnbull I recommend flushing the power steering system every 50K miles!!
Ok so dont take this the wrong way but I'm glad the shaft broke off on you. That's great for views cause now people will know what to do if that happens to them
Buck Wild I'm glad to know that you liked seeing the broken shaft!!
Will this work for a 07 same body style??
Laramie Watson yes it will, it's pretty much the same!!!
dude bolt that vice to something!
@moonpup6262 Good!
You do not start the engine when bleeding, This will cavitate the pump and potentially damaging the pump. You turn the steering wheel 10 times lock to lock to bleed.(making sure the reservoir remains full) Then start engine and turn steering and check for noise, If noisy, turn off engine and repeat
randy miller don't you have to have the pump running to get the air out of the pump?
@@KITS_Auto_and_Truck_Repair Yes this is true but you need to get the bulk of air out the system so the pump does not cavitate too long
And I would recommend flushing and installing a return line filter
@@randymiller7659 Good to know!!
@@KITS_Auto_and_Truck_Repair And I did like your video, just wanted to add my professional opinion being a Licensed Mechanic and a Hydraulic Technician
Dang! NO POWER STEERING FOR YOU!
@kennethhudson8013 yep!
Great video!
@kennethhudson8013 Thank you!
Did you ck the belt to see if it was dry rotted
Sheila Holder The Belt was ok!