Woodpeckers Mortise Match Overview
HTML-код
- Опубликовано: 5 окт 2024
- The SedgeTool team tested out the new Mortise Match from Woodpeckers. In this video Sedge will demonstrate some of the key features of the Mortise Match, including the initial setup, aligning the fences, setting height, and more. As always, Sedge will share a few tips and tricks along the way. There's a lot to like about the Mortise Match, especially with smaller material.
More info on the Mortise Match from Woodpeckers can be found at the link below:
bit.ly/Mortise...
Be positive and stay sharp!
#Woodpeckers #joinery #domino
Affiliate for :
TSO Products : tsoproducts.co...
Kaizen Source : www.avantlink....
Taylor ToolWorks : lddy.no/1eoy5
Forged 3D : forg3d.store/s...
SedgeTool Tool List: amzn.to/3cYbqAi
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear:
Panasonic 4K Ultra HD : amzn.to/3pXXPzX
DJI OSMO : amzn.to/4bYRiKK
Rode Video Mic GO : amzn.to/3vXOJqx
Rode Wireless Go 2 Mic : amzn.to/45aodZt
Sony MDR7506 Headphones : amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card : amzn.to/3i0iT4u
SandDisk 128 Micro SD : amzn.to/3zeJab3
Mac Book Pro : amzn.to/3YHeeea
Follow Us on the social media platforms :
Website: www.sedgetool....
--------
Instagram: www.instagram.....
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com....
_ _ _ _ _ _ _ _ _
Green Suiters Podcast: podcasts.apple....
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Chris "THE UNIT" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
This is Carmonius Finsnickeri’s design which he shared with end users to build themselves.
Now Veritas will be launching Carmonius’ design together with Lee Valley this is a joint venture with Carmonius so he is getting a small royalty. Just a heads up.
Ok .... thanks ....I was unaware of this
@@sedgetool Not everyone can either, check out the FOG :)
I have been using my own shop-made "Carmonius" (i.e., the innovative Swedish woodworker on RUclips) version for close to a year, but when I saw the Woodpeckers' Mortise Match version, I ordered it almost immediately since theirs offered some nice features I could not easily reproduce on my Carmonius version -- chiefly the ability to easily do angles in small stock other than 90º and 45º, and easily switch back and forth between the jig mounted and free-handed DF 500 without losing accuracy. Doing so with my Carmonius version is a bit a pain requiring careful realignment each time it's remounted to the jig. My only grumble about the Woodpeckers version is having to wait nearly 6 months before the anticipated Woodpeckers shipment date.
I see your point on the wait..... I have never seen this "Carmonius " version......Thanks for watching !!!
So stoked you guys did this video!!! I saw it when it first came out, but your indepth explanation totally sells it!! Thanks again guys!!! Maybe we can see Big D's finished project??0
Awesome! Thank you!
Great Demonstration. I love the way you and “Big D” compliment each other! We have the master Professor Sedge and the novice student, (like a lot of us). Your students now have a full knowledge of how to use and setup this accessory. Gives us all the knowledge to make an informed decision. Thank you both. “Be Positive, Stay Safe”
Wow, thank you!
I just wish these two guys dressed like real men. How can their wives let them out of the house in these horrible looking clothes? 😳🤣
Big D your Powerline t-shirt is amazing! Also thank you Sedge for demonstrating thr MortiseMatch, what a very informative video.
Any time!
Nice tip with locking the flaps!
Thanks! 👍
i had watched the woodpecker vid on the mortice match and was not impressed .... however after watching this video I now see the value in this jig ..... great demonstration !!!
Thanks Vince !!!!!!!!!!!
My frustration with the Mortise Match, at least as out of the box, is that there's nothing to help with even modestly larger material. The protractor design is so single-minded it makes it more of a uni-tasker than it should be. I love how cleanly the board connects with the Domino (ignoring the fact you have to deal with the springs when you take it out).
I've created my own referencing jig to allow placement of dominos further from the center. Honestly I feel my jig is easier to use than the protractor. I'm still working on a better way of holding pieces vertically. What I've been using so far has been a little clunky when switching to vertical.
Part of this is that the Domino doesn't have a great spot to quickly attach a clamp. Because this tool already uses the best attachment points on the base of the Domino, there's not a lot of room to connect. I think Woodworkers' ideas for the Domino are starting to exceed what was thought of when it was designed. Hopefully we'll see some advancements in the connectability of the design so we can simplify our jigs.
Thanks for sharing
Maybe on the revised tool.
Nice video Sedge, that looks like one nice jig. The one thing that holds me back from getting this (and other jigs/tools) is the lack of compound miter features. Perhaps it is lack of demand but in the meantime, I will continue to wait. BTW - I don't know if you remember but, we met at Mark's Machinery several years ago. Steve
Right on Steve !!!!
Steve, as one of your fans, I think you do amazing work. It's nice to see you here, too.
Very handy for miter joints 🤩
For Sure
Good move on the part of WP getting this unit in your hands.
Glad you like it .....
Mere mortals have to wait another 5 months before it arrives. At least I did get my order in almost immediately. Alas, in the past that has not made much difference with Woodpeckers.
Excellent !
Many thanks!
Impressive jig, well presented guys. I am confused on one issue. If you were cutting at 90, not 22.5, on the end of a piece with the same width, the fence would cover and be pushed against the nearest flap, then how can that sliding index bar reference off that flap if its hidden by the fence? I hope you understand what I'm asking.
the flap is spring loaded
I’d like this with a way to hold stock vertically. Let’s say your making drawer boxes with 2 4x20 dominos. You can do fronts and backs flat then stand the sides up. And I can think of some other ideas. Flag stops and an air clamp or vacuum clamp.
cool ideas
Matthew, I made the carmnious version with a thicker fence which does allow me to mortise vertically. All my small boxes are made that way. Also I noticed the red fence has a track which would allow you to bolt a subfence to make a thicker fence.
Thank you for a very informative demonstration. Just preparing to unpack my MortiseMatch and put it to use in the shop, and now feel confident that it will be ready for use in a half-hour. I also hit the subscribe button and look forward to spending more time watching your videos. I have plenty of time since I spent all my $$$ at Woodpeckers and can't go anywhere .
Glad it was helpful!
I think I may cancel my Autoscale miter sled order and pick up one of these instead. The Autoscale is almost perfect but it doesn't allow for a sacrificial fence. The Mortise Match however, is PERFECT. If I use your link do you get a small kickback from peckers?
Dean....I do not get any kickback from the link...we just like good stuff to makes our shop time more efficient..... Sunday shop time is quite precious to the SedgeTool gang !!!!!
@@sedgetool they should give you a couple bucks!!
Sedge, where can I pick up your shirt? You have a store link yet for it?
Sedgetool.com... www.sedgetool.com/merch
This IS a neat set up. It is similar to the 20-something year old Woodhaven Biscuit Master, and later, the WH Domino Master. Does this version also have an extendable fence, indexable for multiple mortises? I think WH stopped making it years ago, so this is your only option aside from making one. I can’t wait to see Benchdog UKs version ;) I made my domino master copy over 10 years ago but using a kreg bench clamp. This setup is very, very useful folks!
Thanks !!!!
Nice Twisted Sister t shirt 😁
Thanks 😅
@@sedgetool My mortises were off by the difference in the width of the flippers !/32". My domino was sent back to Festool and calibrated. So much for mortise match. Any suggestions? Maybe a new head? part 102. if available. change out the flippers to use mortise match, two the same width. good presentation. Could be operator error. But I think the diff in width of the flippers could be a definite problem. thanks
I want one!
Wicked .....
What a handy tool for the domino. My only complaint is woodpeckers not making tools like this available in a timely manner. 5 months estimated ship date is a little excessive.
Worth the Wait !!!!
Woodpecker changed the design and the Mortise Match does not work the same as your prototype unit. They have changed the flag set positioning.
oh ....Thanks !!!
ok
Nice video and demonstration, as usual! This is an interesting derivative version of Ola's; however, at $650 and an estimated shipping date in September, I'll pass.
Thanks Mike !
I wonder can it be used with a Domino XL fitted with the Seneca adapter?
nope
Would a domino be necessary here,nice jig and all but a bit of ca glue and accelerant be just a tad cheaper 😂 and I can’t think of application where piece like that would need domino strength
OK
What are small pats?
😂 .. small parts ..
Let's experiment. great words to live by. For me it might be more than a few pieces. 🤣🤣🤣
You and me both!
Very Woodpeckers: a very expensive solution for a problem that didn't exist... 😉
Good For You !!!!!
Will this work with the 700?
nope
💯💚💚💚👍👍👍
Thanks !!!
Nice to see the embracing of a non Festool product that works with a Festool product by a Festool guy..
Edit: good to know that centerline thingon the domino 👍... scales aren't working for me on many tools
SedgeTool guy !!!!!
@@sedgetool
😂😂😬😬
10 4
I was reluctant to watch the video when I saw that combination.
The price 😢
Check out the pre-sale on the link below
Is that table phenolic or plastic? Edit: Ohhhh it is phenolic! Nice tool! Price makes a little more sense now. This might be in my near future.
Phenolic...Worth it !!