I personally have bought a tilt trailer from these guys and it was top notch quality. I've been using it for a year and has held up better then any of my previous trailers. Worth every penny and was satisfied with the customer service. 5 stars in my book. Thanks guys!
Watched this and went out and bought the same trailer for my Inop Maserati 2006. The nice little floor lights didn't come on at night, so I stuck my free Harbor Freight flashlight to the front. When I got to the junkyard to dump the car, the flashlight was gone. I guess aluminum is not magnetic. That was a great flashlight
Hola. Le escribo desde Argentina, no se si va a poder entender lo que le escribo, pido disculpas pero no se inglés. Quisiera saber si me puede decir que tipo de cilindro usa, tengo un trailer parecido y quisiera poner un cilindro que igual. Saludos desde Argentina.
That's actually something we do offer, if you're interested I can send you pics of them in use. My email is CarGuyTrailers@gmail.com or you can call 636-272-7070, ask for Brett.
What brand and style axles are these? I did read your answer about them being on springs, so I am guessing they are drop axles. So 4" or more?? Also what brand brakes are on the axles? Some backing plates are the same as automotive and can use an emergency brake. If so, this trailer could be loaded and unloaded without being attached to a truck.
Sorry for the long reply, somehow I missed this comment but you are correct, they are a 4" drop axle and I believe they are similar to the backing plate you're referring to however you can already load the trailer without it being hooked to a truck as the drop leg jack and the deck being tilted down to the ground hold the trailer in place. If you look on CarGuyTrailers.com you'll come across some pics where I have my Blue 1970 Trans Am loaded up on a red one and I think it will show it loaded without a truck hooked up.
I thought I'd toss in my two cents worth. If you are trying to load a low nosed car, bring it at an angle so either side front tire starts up the bed before the other. Similar to angling up a curb. If need be, the car can be locked in place with the front on and rear off, then swing the trailer with the truck to align the rear tires.
I've been looking at these as a more economical alternative to the hydraulic ones. Is it still possible to put a winch on these to pull dead cars up? Would the winch weight be enough to throw off the balance? And second - if your car is truly dead - Is there way to make the trailer go up in order to get the vehicle to roll off (while being held on by the winch)? Any kind of hand crank to get it to tilt up or something?
Question on the rear-most portion of the ramps - the part that sticks out beyond the lights and the bumper of the loaded car: is there any way to hinge them so after loading, they can fold up and reduce the length of the trailer? (as is done on some big heavy equipment trailers)
Hi Brent The Trailer is Nice but you definitely need 2 Levers to Anchor the Deck on each side for Safety. What is the Length, Capacity and Price of this Trailer? Thanks Cedric
Can I have the same trailer with sides out of the same mesh built unto this trailer,at least 12 inches high,but with hinges that I can fold them down. I will tow a Fiat Abarth,and I will also be using a Dodge,but the Pro Master,by the way,my Maserati is red,but an 08. I love it.
Sorry for the delay, The trailer shown is our standard trailer and is $4,995 however they are tubular steel, not Aluminum. We offer an aluminum dovetail option that's very user friendly as well and only weighs 1,350lbs. The Steel Eliminator Tilt-Deck weighs about 2,400lbs. I had both an e90 and e92 M3 and they worked great on either trailer as does my current e39 M5. Fellow BMW nerd here, lol. Feel free to give me a call at 636-272-7070 and we can discuss your needs in detail. -Brett
Yes, every trailer we sell has a receiver in the deck to mount a winch to. I'm the guy who tends to break my car more than it runs anyways hence the standard winch mount and in-floor loading lights, because when it breaks tends to be at the end of the day.
The trailer shown is our standard trailer and is $4,995 and we do ship globally. We also have the ability to get the trailer into a shipping container if Roll-on Roll-off isn't an option. Give me a call at 636-272-7070 and we can get one to you. -Brett
Gyro Plus Hi I know that you can use a winch on the Kwik Load . There built in Sherman Texas. Text contact 903-870-8559. Thank you for your attention to detail. Wes
Yes, every trailer we sell has a built in receiver for a winch mount so you're covered! We use a receiver tube style winch mount so the winch can be removable.
Standard shipping is $.80 per loaded mile however we can often combine it with other deliveries and reduce that by half so you'd be $5,750 delivered to your door.
Actually, we can and do ship these globally, we've developed a process to get it into a shipping container. Let me know if you want to order one. 636-272-7070 -Brett
It seemed to rub the front chin spoiler. I transport and 2014 Porsche 911 and fear the same chin rub. Please verify, verify with video if possible. I am in buying mode!
Are you guys still in business because I have tried on numerous occasions to contact you to no avail. At your old phone number the gentleman told me that you were out of business. If it is true why don't you say so?
$4,995 which includes all of our standard features that are optional with other trailers. We include (standard) dual brake axles, receiver tube winch mount, LED loading lights in the floor, all other lights LED, painted top and bottom, 7k heavy duty drop-leg jack (so you can store a car on the trailer when it's not hooked to a truck) and polished aluminum trim and steps. We have several in-stock and ready to ship nationwide!
TheCarGuyStl Wow, really? Im not in the market for a trailer yet, but I saw one of those airbagged trailers go for almost twice as much. Whenever I am in the market for one, I will definetely come here first! Great video, I died when you opened the door....
I personally have bought a tilt trailer from these guys and it was top notch quality. I've been using it for a year and has held up better then any of my previous trailers. Worth every penny and was satisfied with the customer service. 5 stars in my book. Thanks guys!
hi am Henry from Africa Zambia. I like the way you are doing your trailers. can you teach me how to build one .
I also make trailers here.
Watched this and went out and bought the same trailer for my Inop Maserati 2006. The nice little floor lights didn't come on at night, so I stuck my free Harbor Freight flashlight to the front. When I got to the junkyard to dump the car, the flashlight was gone. I guess aluminum is not magnetic. That was a great flashlight
Doesn’t sound like u can afford one of these 🤷♂️🤷♂️🤷♂️
I purchased this exact trailer last year and LOVE IT! I use it daily and would highly recommend it. I plan to purchase another one in a year or two.
Glad to hear it! Let us know when you're ready for your next Eliminator.
TheCarG
uyStl
TheCarGuyStl where are y'all located
How much weight it can load on to?? In ton..
@@TheCarGuyStl How much is the Eliminator tilt bed 18' or 20' 7000k trailer
My heart skipped a beat when you opened the door. Cool trailer though!
Ha! Don't worry, we tested it first.
One mighty fine unit indeed. Super nice craftsmanship.
Ive got a Granturismo S and v12 vanquish and I'm considering this trailer between my PA and FL home trips
Did you scratch the bottom of the front end while unloading?
Really nice! Maybe, just maybe need an extra little "ramp" to the end of the tilting part. For the really low cars. That car is a borderline.
My husband is probably the guy that built that!!
@wzrubicon 1 and take care of his kids, his home and him.
What's the point of your comment other than being a richard?
awesome trailer
Intrested in this trailer what does something like this go for please comment back
I would like to price the heavy hauler version but also wonder if you can build it with removable fenders for wider tires to clear
EXCELLENT VIDEO!! EXCELLENT TRAILER!!
Hola. Le escribo desde Argentina, no se si va a poder entender lo que le escribo, pido disculpas pero no se inglés. Quisiera saber si me puede decir que tipo de cilindro usa, tengo un trailer parecido y quisiera poner un cilindro que igual. Saludos desde Argentina.
Excellent!,its that the small version?
This is badass!
That is sweet!
Not all car doors will clear the fender and yes front valance did rub trailer
Great design but the angle is too steep for my lowered Corvette. That Maserati has a ton of front clearance.
Nice ,..you ought to have 3 receiver mounts in floor to add a motorcycle front wheel catch/latch ?
That's actually something we do offer, if you're interested I can send you pics of them in use. My email is CarGuyTrailers@gmail.com or you can call 636-272-7070, ask for Brett.
I agree looking for one where I can haul my RWD convertible and motorcycle behind my RV
What brand and style axles are these? I did read your answer about them being on springs, so I am guessing they are drop axles. So 4" or more?? Also what brand brakes are on the axles? Some backing plates are the same as automotive and can use an emergency brake. If so, this trailer could be loaded and unloaded without being attached to a truck.
Sorry for the long reply, somehow I missed this comment but you are correct, they are a 4" drop axle and I believe they are similar to the backing plate you're referring to however you can already load the trailer without it being hooked to a truck as the drop leg jack and the deck being tilted down to the ground hold the trailer in place. If you look on CarGuyTrailers.com you'll come across some pics where I have my Blue 1970 Trans Am loaded up on a red one and I think it will show it loaded without a truck hooked up.
I thought I'd toss in my two cents worth. If you are trying to load a low nosed car, bring it at an angle so either side front tire starts up the bed before the other. Similar to angling up a curb. If need be, the car can be locked in place with the front on and rear off, then swing the trailer with the truck to align the rear tires.
hey brett is that 20' deck or 20' full length......nice rig
Aluminum or steel deck? About how heavy is this model pictured?
I've been looking at these as a more economical alternative to the hydraulic ones. Is it still possible to put a winch on these to pull dead cars up? Would the winch weight be enough to throw off the balance? And second - if your car is truly dead - Is there way to make the trailer go up in order to get the vehicle to roll off (while being held on by the winch)? Any kind of hand crank to get it to tilt up or something?
How do you unload solo if the car doesn't run? seem like it might be dangerous.
Whats the trailer weight of this compared similar trailer in steel
Could you use an all North American car next time (Tesla Model S P85D) !
Good idea! Beautiful car to boot.
Question on the rear-most portion of the ramps - the part that sticks out beyond the lights and the bumper of the loaded car: is there any way to hinge them so after loading, they can fold up and reduce the length of the trailer? (as is done on some big heavy equipment trailers)
How do you unload a car that is wrecked and doesnt run, with the tilt??
Can you show how to strap down a car on this trailer?
Do u need to stop at weight stations with this trailer
Hi Brent The Trailer is Nice but you definitely need 2 Levers to Anchor the Deck on each side for Safety.
What is the Length, Capacity and Price of this Trailer?
Thanks
Cedric
What is the lowest measurement ground to bumper can this car load. I suppose the length of the nose would also have to be considered.
What's the distance between the fenders?
Can I have the same trailer with sides out of the same mesh built unto this trailer,at least 12 inches high,but with hinges that I can fold them down. I will tow a Fiat Abarth,and I will also be using a Dodge,but the Pro Master,by the way,my Maserati is red,but an 08. I love it.
Looks like a trailer I would consider purchasing. How much and where can I purchase one?
ricardo.
Is it possible to get that exact trailer in color black and with a e track strap down system?
what's happen with the truck is brake? is safe?
next video can you do a hell cat please?
where can I purchase one of these ?
What is the price? All aluminum? What is the weight of the trailer? Looking to haul my 2011 e92 m3. Weighs around 3300lbs. Very interested
Sorry for the delay, The trailer shown is our standard trailer and is $4,995 however they are tubular steel, not Aluminum. We offer an aluminum dovetail option that's very user friendly as well and only weighs 1,350lbs. The Steel Eliminator Tilt-Deck weighs about 2,400lbs. I had both an e90 and e92 M3 and they worked great on either trailer as does my current e39 M5. Fellow BMW nerd here, lol. Feel free to give me a call at 636-272-7070 and we can discuss your needs in detail. -Brett
Price ?
Are these trailers manufactured by 102 ironworks?
By the looks of it their is no leaf springs on the trailer so is their leaf springs on it
There are leaf springs on both axles.
do you have a trailer with the option of a winch not all car run after race day lol
Yes, every trailer we sell has a receiver in the deck to mount a winch to. I'm the guy who tends to break my car more than it runs anyways hence the standard winch mount and in-floor loading lights, because when it breaks tends to be at the end of the day.
+Car Guy Trailers any dealers in houston tx
How much is the purchase amount
You haven't answered this question for people, are fenders removable?
can you unload your car if the trailer is not attached to a vehicle?
No, a trailer needs to be hooked to a truck to load it, otherwise the trailer would move around. Thanks for watching!
Yes you could if you had 2 Jacks at the Rear on either side to steady the Trailer.
How much it cost?
That's so cool cool,but how heavy is it.? can it be made with Aluminum mesh to make it lighter?
how much does it coast , and do you have international shipping?
The trailer shown is our standard trailer and is $4,995 and we do ship globally. We also have the ability to get the trailer into a shipping container if Roll-on Roll-off isn't an option. Give me a call at 636-272-7070 and we can get one to you. -Brett
why doesn't fall the car down from the trailer?
Nice Trailer!!!!!!! @thecarguystl What are the dimensions of the trailer?
do you have a winch or can you add the winch to your trailer
Where would you put it , can you show that on your video?
Gyro Plus
Hi
I know that you can use a winch on the Kwik Load . There built in Sherman Texas.
Text contact
903-870-8559.
Thank you for your attention to detail.
Wes
what about if i wanna install winch on it???
Could you put a winch on the front of a tilt trailer? Or, are these trailers only for cars that are operable/running so you can drive it on... ??
Yes, every trailer we sell has a built in receiver for a winch mount so you're covered! We use a receiver tube style winch mount so the winch can be removable.
every trailer you sell has a built in receiver for a winch? that's a very weird policy
where can i buy this trailer im in nj??
Hello great video and trailer.
how much shipped to Sacramento california?
Standard shipping is $.80 per loaded mile however we can often combine it with other deliveries and reduce that by half so you'd be $5,750 delivered to your door.
How much to deliver this shown trailer to Fort Wayne, IN?
Nice trailer I don’t think a Porsche 2018 GT2 would make it ?
Are the fenders removable?
i need a trailer asap and no one answers the number when i call....
Boa noite morro no Brasil e quero fazer uma carretinha igual esta do vídeo
I want one but i'm in Australia so I have to make one my self
Actually, we can and do ship these globally, we've developed a process to get it into a shipping container. Let me know if you want to order one. 636-272-7070 -Brett
How much is it???
are they equipt with brakes?
Johnny Evo Yes, on both axles.
Will this haul a 2003 F250 4x4 supper duty ???
Keith, we build this trailer with our "Heavy Hauler" upgrade which upps the capacity to a 10,400# GVWR so yes, we've got you covered!
How much I'm in the market?
How heavy is the trailer? and what are the dimensions?
the trailer weighs 2,400 lbs and the tilting portion of the deck is 20' by 79" wide.
i need one looking for one for hauling disel trucks 14k gvwr
Aj Santibanes l
Wow
It seemed to rub the front chin spoiler. I transport and 2014 Porsche 911 and fear the same chin rub. Please verify, verify with video if possible. I am in buying mode!
John G
Hello
Have you looked into the Kwik Load trailer built in Texas?
do you have any for sale?
where can i buy one and how much do they run
Go to CarGuyTrailers.com or call Brett at (636)795-5781 to place your order. The trailer you see here is $4,995.
Hello, Great design, really enjoyed it. I'm from Brazil, could you send me your project by email. I thank you.
Are you guys still in business because I have tried on numerous occasions to contact you to no avail. At your old phone number the gentleman told me that you were out of business. If it is true why don't you say so?
no one answers their phone as of 9/22/21. Too bad, I would have bought!
can i use this beautiful trailer for towing services as a bussiness?
how much?
$4,995 which includes all of our standard features that are optional with other trailers. We include (standard) dual brake axles, receiver tube winch mount, LED loading lights in the floor, all other lights LED, painted top and bottom, 7k heavy duty drop-leg jack (so you can store a car on the trailer when it's not hooked to a truck) and polished aluminum trim and steps. We have several in-stock and ready to ship nationwide!
TheCarGuyStl Wow, really? Im not in the market for a trailer yet, but I saw one of those airbagged trailers go for almost twice as much. Whenever I am in the market for one, I will definetely come here first! Great video, I died when you opened the door....
dang. still scrapes though :(
limited in use and way overpriced
Jordan and his me Queen Elizabeth I'm a going to do let's go Mommy Nicholas no I want to go bike spaghetti car I want to do