I know ratchets are fairly cheap. But this video shows a person how to make one when you can't just quickly pop down to Lows or what ever hardware store to buy one. People are so quick to criticize and judge.
Leon Tryitall yeah they r. Plus a lot of people don't believe in building something just to see if u can either. They have no ability to do it so they give others shit that try to, or succeed in doing it. Screw them don't pay them any attention.
It doesn’t matter if he could or couldn’t pop on over to the hardware store and buy a ratchet. The point is he has the ability to build so he did and he’s making the videos while others are watching and criticizing. Your skills are very impressive!!! I’m curious where you live, please.
Edit: Oh never mind, you used this later - but you could easily have started that way For removing the teeth, you could try a technique I learned from Atomic zombie for cleaning up parts - just grab your angle grinder with a grinding (not cutting) disk and let the sprocket rotate freely (as in the video) while grinding away. It gives a very even result as all the teeth are spinning past at roughly the same speed and height as you grind down. Hold the angle grinder at a slight angle so that half the motion goes into spinning the sprocket and half into grinding down the teeth
Very creative! I am looking to design a custom ratcheting spanner nut barrel wrench for an AR-15 that will go around the barrel. I might just be able to use this concept! Thank you for the great video! Don't mind the haters in the comments!
You're a Filipino? I just thought you are an Austrian citizen from Austria. You did a great job with your impressive idea of improvised ratchet from bicycle sprocket. Cheers, kabayan!
Shawn GBerry do u really think he went and bought a welder to build that?? Wow.. Id hope not but pretty clear by ur comment.. Id put money on him already having the welder and was just doing a project.
attach your welding lead to the outside race of the bearing or you will send power through the bearing welding the internals together. nice off grid ideas for tools keep up the good work.
Cutting takes longer because you apply less pressure. Your hand gets tired faster because you use more force with only one hand instead of less force but with both hands. If you used both hands you would cut easier and it would be less exhausting for the hands. Also there's less control of the hacksaw using one hand. At least that's my experience with it.
oh well , thats is in your case, in my case i can push down the hacksaw so it will gain some weight i can do that in one hand, plus the hacksaw is already heavy, i mean sir there is no big deal, i'm using hacksaw since child do you think i don't know how to cut faster? you have your point and i do respect it. thanks for the suggestion sir and godbless.
Awesome video,when your welding galvanized steel don't breathe fumes not safe you probably already know this if so I'm sorry and like I said great video.
tas perron we....thas a fucken good idea...love this kind of videos ....habeses podemos tener el dinero para comprar las cosas pero hacerlo tu mismo lo bace invaluable y espesial....congrats bro....nice
how funny that many creators here in youtube copied this project then gets more views than me haha lol.
Now your video is rocking,
Why don't freewheels ever break loose that easy for me?
I know ratchets are fairly cheap. But this video shows a person how to make one when you can't just quickly pop down to Lows or what ever hardware store to buy one. People are so quick to criticize and judge.
Leon Tryitall yeah they r. Plus a lot of people don't believe in building something just to see if u can either. They have no ability to do it so they give others shit that try to, or succeed in doing it. Screw them don't pay them any attention.
Yeah, but where did he pop on down to to get grinder discs? And why do you have sockets if you don't have a socket wrench?
It doesn’t matter if he could or couldn’t pop on over to the hardware store and buy a ratchet. The point is he has the ability to build so he did and he’s making the videos while others are watching and criticizing. Your skills are very impressive!!! I’m curious where you live, please.
vai mere pass app jeisa tools nahi hai
first buy the tool which cost you at least 100 dollar and then you will made one 10 dollar Wrench.. Cool
Kumar Vlogs what
Sears has them for forty bucks. Really?
Edit: Oh never mind, you used this later - but you could easily have started that way
For removing the teeth, you could try a technique I learned from Atomic zombie for cleaning up parts - just grab your angle grinder with a grinding (not cutting) disk and let the sprocket rotate freely (as in the video) while grinding away. It gives a very even result as all the teeth are spinning past at roughly the same speed and height as you grind down. Hold the angle grinder at a slight angle so that half the motion goes into spinning the sprocket and half into grinding down the teeth
Very creative! I am looking to design a custom ratcheting spanner nut barrel wrench for an AR-15 that will go around the barrel. I might just be able to use this concept! Thank you for the great video! Don't mind the haters in the comments!
It's cool
You're a Filipino? I just thought you are an Austrian citizen from Austria. You did a great job with your impressive idea of improvised ratchet from bicycle sprocket. Cheers, kabayan!
SALAMAT KABAYAN :D
Careful now, I think that green is trademarked for the 'Make It Extreme' channel! :)
super bro
beli aja made in cina murah kho
Last time I checked, ratchets were way less expensive than welding machines. I watched it all anyway. Good video.
Shawn GBerry do u really think he went and bought a welder to build that?? Wow.. Id hope not but pretty clear by ur comment.. Id put money on him already having the welder and was just doing a project.
Cara vc e fera gostei muito do seu trabalho valeu pela dica tudo de bom pra você
Great work with such little tools. I think I might make one myself.
Using tools to make tools. You got yourself a subscriber. 👍
buen invento chaval
cool man very cool and reply
Belo trabalho vou fazer um pra mim essas chaves são caras aqui no Brasil.
good luck and have fun brother :)
ingenious but i dont think i put to much torque on it
smartman
attach your welding lead to the outside race of the bearing or you will send power through the bearing welding the internals together. nice off grid ideas for tools keep up the good work.
Muy bueno bien improvisado !!! Aqui en Argentina también se improvisa bastante con cosas asi!! Muy bueno un ABRAZO GRANDE! !!
asa rachtchet vale verga
muy bueno..... .aprovechar lo que se tiene .... en la casa
🗣Give it to me I want it 😻
Do you seriously cut with hacksaw using only one hand? Why do you make it harder for yourself?
i dont get it sir, its not even hard for me.
Cutting takes longer because you apply less pressure. Your hand gets tired faster because you use more force with only one hand instead of less force but with both hands. If you used both hands you would cut easier and it would be less exhausting for the hands. Also there's less control of the hacksaw using one hand. At least that's my experience with it.
oh well , thats is in your case, in my case i can push down the hacksaw so it will gain some weight i can do that in one hand, plus the hacksaw is already heavy, i mean sir there is no big deal, i'm using hacksaw since child do you think i don't know how to cut faster? you have your point and i do respect it. thanks for the suggestion sir and godbless.
very nice
Awesome video,when your welding galvanized steel don't breathe fumes not safe you probably already know this if so I'm sorry and like I said great video.
You could drill the ends of the 5/8 bar and countersink a neodymium magnet to help socket stay on as well.
Very handy.Nice idea.
Cool
satisfying vis
greetings from México, good job.!!!!
Brilliant
wow good
muy bueno..... .aprovechar lo que se tiene .... en la casa
No. Mames. Ya. A. Matracas. De. Marcas
Me compro uno nuevo y ya...
Without harden steel?
😂😂if u veld how can the inner rubber valva work? Bcz it was burn
What a waste of time to make something that cost only $15 to buy.
+Bunheng Por making waste to something useful. and that was this channel is!
now one forcing you to watch idiot.
welldone.
😍😍😍
Gostei dessa idéia ,vou fazer uma chave dessa.
YAN ANG MR GEAR NG PINAS!!!
!Eres extraordinario¡ Felicitaciones.
thanks
Its is the best
Good job
I knew this would come once.... Next do a belst sander from toilet paper holders
A little rough but very good putting it together.
nice project its always fun to build stuff
Doing right things need vision u deserve sound vision bro.. Keep doing great things.
good job. I have a five bicycle so i can do 5 .
nice
maniek 2411 sweet, Now let's see u do it then.
You sir, are a legend.
Fantastic idea sek austria, good utility for ratchet wrench !
👏👏👏👏👏👏
Hubiese utilizado dos arandelas y me ahorraba mucho trabajo
Nen Minecraft Intro? Bist Österreicher, oder? :D
Mantap.
👏🏻👍🏻 from 🇧🇷 !!
Eso que?
Que grandiosa idea .. me podrias aser una yo ocupo una asi que este muy fuerte 👍
... good one.. it is not for the wratchet...but for your welding skill that I....liked this video.
tas perron we....thas a fucken good idea...love this kind of videos ....habeses podemos tener el dinero para comprar las cosas pero hacerlo tu mismo lo bace invaluable y espesial....congrats bro....nice
Good creativity. Thanks for showing.
LOVE it....
very post apocalyptic i must say
That's cool
wow good mind
Next step - make scooter from rolls royse wheels.
Great job! How long did it take?
im still using it now :)
Wonderfull tool saya tertarik
Muita inteligência. Vou fazer um. Muito útil. Parabéns. Grato. Saudações.
nice 1....
So great
Nice work
original video.
nice v good job
mrci bien
Very nice video
love your idea even better that u installed the ball so that the socket dose nut fall out
Thank for making this video and sharing your knowledge.
Nice work
dk why it was in my recomended but totally worthed
Vehri vehri nice
Ae garoto quem sabe faz ao vivo 👏👏👏👏👏👏
cool wrench!
Good work ..thanks
Nice.
Magaling, magaling, magaling....
that is perfect for wood bolts
World
Good idea.
It's much more technical tool required for uses in our life.
Very good
Labinpt gashi
well done keep up bro awsm
Very good
manong ka gewa tao
Good.
good idea.
good idea
good job
Gracias a los videos e podido hacer una prenza para carpintería