Brother l regularly sea your video you are master of your work l hope in future you will more better in your trade unless l alive I shall sea your work thanks very much
That was good you made a spinning round thing, I was thinking about the same thing, but using a Toyota front hub, and belt from a motorcycle on the brake rotor with the belt sprocket bolted to back side of brake and a real chuck with proper mounting plate. It would be much more work to do but I think the better stability would be worth it.
Hello my friend It was a good idea This tool I built has a lot of issues that didn't work for me, but I'm building a complete lathe that should probably be finished in the coming months.🙏🌹
WOW, I have a new project in mind, I love your idea, but Im wondering if a better bearing could produce a smoother 'lathe', your method works, but there is plenty of run out on both axis, (Im assuming that is just from the play in the ball bearing itself), Anyone have any ideas?
Hi dear mike I have some mistake for this project, It must made with two bearings and it must have a unique pipe that pushed in bearings I am making a complete lathe machine and making a video about it It take several months 😉
Se podría hacer con planchuelas un nido para los rodamientos en vez de soldarlos digo por si hay que cambiarlos a futuro pero no hay que descartar la creatividad y el ingenio de tal creación muy buena reflexión saludos a todos desde Argentina provincia Buenos Aires S. Nicolás
Muy chueco, con dos rulemanes, uno en cada extremo se alineará el caño mandril. El caño mandril tiene que entrar por el ruleman, no ser cortado en pedazos. Eso también hace que pierda mucho la estabilidad al no ser un solo cuerpo
This is not correct using only one bearing,,, it will shake continuously when it the motor start running,, if it is expected to do a homemade mini lathe machine...
Гениально, молодец мужик!
Thanks 🙏🌹
Exelente trabajo muy creativo felicitaciones
❤️
Good job bro !
Show muito top parabéns.
Ótimo projeto 🇧🇷🇧🇷🇧🇷
Oh my goodness !
أحسنت ستاذ شكرا لك ❤️❤️🙋♂️🙋♂️🌺🌺🥀🥀👏👏🌹🌹💕🌷
Good idea
❤️
very clever idea and very man. thanks for sharing. 10/10
❤️❤️
Hay quá 👍👍
Parabéns companheiro, funcionou perfeito
Perfect
Bom trabalho
ابداع مميذ استمر 🎉🎉
🙏🙏🌹🌹
Interesting prototype machine. Like all prototypes it needs refining
You just made your own lathe machine as it is so. Kudos to you.
❤
Great !
❤️
Gostei muito do seu torno!!
For Cutting Wire ! With !!
can't wait to see if you've made version 2.0
I try to make a lath machine but it take several months
Verry clever sir.
Greetings
Something is better than nothing. It will get you through.
👍
Brother l regularly sea your video you are master of your work l hope in future you will more better in your trade unless l alive I shall sea your work thanks very much
❤️❤️❤️
Great show, congratulations.
🌹
@@innovationtime20 l
@@innovationtime20 o
@@innovationtime20 ruclips.net/video/vmIkQV--rh4/видео.html
Nice job 👌
Muy buena improvisación de un torno.! Claro que muy básico o rudimentario pero muy bueno e ingenioso a la vez.
Saludos y bendiciones hermano.!
You have help I was working on making amin lath for hone project thanks for being unselfish
💐
Nice work! I'd advise to use some oil on cuts/drills and the likes
Tuyệt vời luôn
🙏🌹
Sir very nice 👍
❤️
Amazing
🙏🌹
Sujeta la radial a algo.
Una mesa de coordenadas casera te iría muy bien.
Saludos al profesor Pardal.
Very good idea, but for better stability, life of the machine and function should be twoo roller.
Thanks 👌🙏
Good job my friend...👍
❤️
Bom dia. Qual foi o rolamento que você usou?
Show de bola
That was good you made a spinning round thing, I was thinking about the same thing, but using a Toyota front hub, and belt from a motorcycle on the brake rotor with the belt sprocket bolted to back side of brake and a real chuck with proper mounting plate. It would be much more work to do but I think the better stability would be worth it.
Hello my friend
It was a good idea
This tool I built has a lot of issues that didn't work for me, but I'm building a complete lathe that should probably be finished in the coming months.🙏🌹
@@innovationtime20 good luck that is my idea also with the car front hub, should be stable and centered.
I have not started yet, as I have no shop or place to work yet, but I still try to gather parts.
@@innovationtime20 hope to see the video of the build, and good luck to you also.
WOW, I have a new project in mind, I love your idea, but Im wondering if a better bearing could produce a smoother 'lathe', your method works, but there is plenty of run out on both axis, (Im assuming that is just from the play in the ball bearing itself), Anyone have any ideas?
Hi dear mike
I have some mistake for this project, It must made with two bearings and it must have a unique pipe that pushed in bearings
I am making a complete lathe machine and making a video about it
It take several months 😉
ماشاء الله ، جميل
❤️
Top
What is the size in cm of the ball bearing.
Very nice BS video!
Buenisima idea
Te copiaré la idea, Pero lo único le pondré un motor un poco más potente
Bendiciones amigo
❤️
В любой непонятной ситуации приваривай подшипник к стали 3
👍👍👍👍👍
Se podría hacer con planchuelas un nido para los rodamientos en vez de soldarlos digo por si hay que cambiarlos a futuro pero no hay que descartar la creatividad y el ingenio de tal creación muy buena reflexión saludos a todos desde Argentina provincia Buenos Aires S. Nicolás
Hola mi amigo
Tienes toda la razón
gracias🙏🙏💐💐
👍👍👍👍👍👍👍
❤️
Solda direto no rolamento????? .....
Gud ideal...
🙏🙏🌹🌹
Good job ,you can’t imagine how I waited to see something like this ,bless you !
🙏🙏🌹🌹
Cual es la función del capacitador allí y perdone la pregunta.
Olá Boa noite, vc poderia me falar qual o eletrodo que vc solda o rolamento
7018 celulosico amigo
@@ernestocampagnucci238 muito obrigado,isso é importante Boa noite.
L00
Kk8
Where the heck should i get a huge bearings
👌💐
great work but a single bearing seems to be unstable i can see the shaft wobbling
👍🙏
👍👍👍👍👍👍🤗🤗🤗🤗🤗🤗
You need to lubricate those bearings now and again to prevent wear
👍👍
Ficou meio desalinhado 😂
Ha 2 csapágyat használtál volna jobb lenne mert egy önmagában kotyog😊
Ne jamais souder un roulement😢
Туфта это всё)))! Диск болгарки разлетается мгновенно.
Great idea
But centre is not proper
My handmade lath machine coming soon 😉
Как только увидел, что начал приваривать подшипник, дальше смотреть не стал.
Máy tiện đơn giản
For WIRE ! WORK !!
Timp pierdut , o mizerie !
❤️
MURX MURX MURX 😂😂😂😂
Неужели не видно что центр смещён конкретно.
😅
It must have 2 bearing
watch my homemade lathe machine video👌😉
Seriously. Huge run out. What a waste of time.
Add a video of yours, if you built one.
@@boydmcree9085 hola
This has got to be a spoof right?
Maybe 😏
SO !! WHERE!! DOES ! THE ! SPOOF !! COME ! FROM !! ?? THEN !!!
Приварил подшипник, нужно закрывать видео на этом моменте, 😢😢
👍😅
Muy chueco, con dos rulemanes, uno en cada extremo se alineará el caño mandril. El caño mandril tiene que entrar por el ruleman, no ser cortado en pedazos. Eso también hace que pierda mucho la estabilidad al no ser un solo cuerpo
👍
Kkkkkk Meu Deus, o quê é isso.
This is not correct using only one bearing,,, it will shake continuously when it the motor start running,, if it is expected to do a homemade mini lathe machine...
Hello my friend
It was just a simple idea
I'm building a complete lathe which will probably take a few months, I think you might find it interesting.😉
Станок високої точності😂
Це лише ідея, і я вдосконалю її в наступних відео😉
Cómo vas a soldar la pista de un rodamiento. Se deforma y se cristaliza y te copia el error en el maecanizado fuaaaaa
👍
It's time's waste Idea.
Static and dynamic balance not found..
Very poor rounding accuracy.
Yes bro
It's just an idea that should be improved
one bearing should not be good for that. You need two bearing to avoid shaking
👍💐💐
Centralizalo ese brinco no debe estar
👍
И что, это токарный???)))
Que gambiarra
❤️
I Suppose this ! WOULD ! ONLY ! BE ! OF ANY ! REAL ! GOOD ! FOR !! WIRE ! SIZE !! BAR !!
Tá muito fora de centro e é quase impossível colocar !
Eu tenho que reconstruir e melhorar essa ideia
@@innovationtime20 boa ideia , vou acompanhando aqui 👍🏼
What? That thing is dangerous.
It's a little dangerous but when you haven't enough money to buy a lathe this tool can be useful dear Ronald 💐
@@innovationtime20 So how much was ! The Welder ! Then !??
Ля!...
❤
Used garbage, to build garbage to make other steel into garbage.....amazing
Bearings ar'nt going to last too long.
So how Long ! Would ! You Say ! The Bearings ! Will Last ! For then !??
That depends how often he uses it. All the grit from the grinding will get inside the bearing causing it to fail.
@@djhscorp With Proper Maintenance That Shouldnt be ! Any Problem whatsoever !
That’s what a lathe is for …. 🤔
Not good. No precision!?
This is just an idea that I will make better than this
I would be ashamed of that home made lathe
Hi dear Tim
It was just an idea that made in a bad way. But I work on a lath machine that will surprise you 😉
I think it will next month finished
ਕੀ ਬਕਵਾਸ ਹੈ?
😅😅😅😅
🙄
No
🌹
😂😂😂
The music junked another video 👎👎👎💩💩💩😬
Take easy bro 💐💐
So WHAT ! JUNK ! WAS THAT ! ?? THEN !
Полная хрень,
Super idea
👍
👍👍👍👍
❤️