5:30' use salt will make chlore gas, and it's dangerous if high concentration. You can use lemon juice or vinegar. You should mention safety when using acid sulfuric also.
I've built a few HHO generators, and I see a few issues with his design. If he's intending on producing just hydrogen, then he needs to minimize the amount of negative rods because hydrogen is produced on the positive side and oxygen is produced on the negative side also I noticed that he's not using a spark arrestor or one-way valve. When the Flaming gas backs up into that accumulator tank it's going to explode like a grenade!
You can’t change the amount of hydrogen and oxygen produced by using more rods. They are stoichiometrically related, two liters of hydrogen must produce one liter of oxygen. Giving less surface area to oxygen production will only reduce the reaction rate overall since oxygen will have a bottleneck.
Yo también e realizado experimentos con generadores de hidrógeno y por lo general siempre se produce el doble de oxígeno que de hidrógeno , aparte que te equivocas el diseño si cuenta con un sistema anti retroceso, o también llamado burbujeador , se nota la poca experiencia que tienes en el tema , y yo más que defectos en ese diseño lo que veo es una tremenda inspiración para un muy potente cañón , solo es cuestión de hacer unas pequeñas modificaciones para que soporte una presión mayor de ese modo se obtiene un cañón que nada tiene que envidiarle a un cañón que use pólvora esmas creo que incluso podria superarlo pues la potencia explosiva del hidrógeno es enorme
Hello, great video and good idea to use the inert carbon core of dry cells, but you have left the welds exposed, remember to isolate all the metals inside the HHO reactor otherwise all the metal anodes will disappear and that is why the electrolyte will get dirty and the use of inert carbon cores will lose all sense, but the assembly is nice.
Congratulations, it was very enjoyable. I was also planning to make this device. The idea of this work came to my mind from the alcohol gun. I wanted to make something stronger than the alcohol gun. It works very well for the hydrolysis of baking soda and water solution. Good luck my friend 💯🎉
How long will the generator work until them battery sticks get bad? Also when the battery things be completely dead (no electricity) Is there a way to charge them back into being conductive again? This is the first time I seen your videos. Im so glade youtube recommend me to you. My mind was blown from the creation of this unit. I subscribed right away! Amazing work and cant wait to see more.
Great video! The concept of turning water into hydrogen is fascinating. What are the advantages of this hydrogen generator compared to traditional methods? Are there any safety risks to consider when building and using it? I’d love to learn more about the possible applications of the hydrogen produced. Thanks for sharing!"
I do first time see a face channel whrere these types of vidoes are showing real face - there are a lot of channels where making fake such devices and creator are hiding itself! So this Skill Make channel are legit and awesome!!
A cell like that isn't going to last all that long though as the materials used simply can't withstand the process of breaking the bonds of the water molecules without the water breaking them down in return. The electrodes are all going to breakdown and even the copper wire in contact with the liquid will breakdown into the solution in a short about of time. It's the reason why so many use Stainless Steel, Nickle, or Platinum, or some other material that have a high anticorrosion factor.
With real graphite - not much (although it somewhat depends). However, those rods from batteries are not a graphite, but pressed carbon, and tend to disintegrate disappointingly fast into carbon powder during electrolysis.
That thing is for single show only and will not be durable. Metal parts are exposed to solution and will corrode like hell, especially on anode and especially using sulfuric acid. Carbon rods from batteries are not especially great as electrodes either, but metal parts will fail much faster than them.
Thats not a hydrogen only Browns gas - HHO. He also used KOH which will leat through the solder, metal contacts and copper in no time . Waste of time, use stainless steel and arrestor when burnings the gas.
hence the ability to drive a car on water ! Use the explosion to produce a motion ! IE up and down and tranlare it via gears into circular motion! ... Now we havea n electric car which drives o water ( or Sulpuric acid ! ) and the electric is not driving the car its the hyrogen generated ! hence to make a engine casing for this to make a vehicle ! IN fact in SPACE ! this type if action would be a good long term Feul to drive a ship !
The solder joints will corrode way that acidic environment also the test was pretty useless because you didn't test the joints in that corrosive liquid.
What anger do you have against water melon in the US as one is always use this innocent Cucurbitaceae as a target practice: Btw this is not an hydrogen generator but a O2/H generator. One has to separate them to get the H2 generator.
@@skillmake⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
Beautiful work my ass. Pal, check those wires in soloution regular, less you want a personal grenade ! One spark and boom goes the wet cell. Or find out. Plenty of videoes showing bad results. Check hho for life, if you want a strudier model and a grt flash back arrestor. If the wire was plated s steel of some thickness, I wouldnt worry. But its mere wire that can be corroded, once enough a spark gap will be created. One day you will turn it on unaware, and may loose an eye. Cheap build yes, safe hell no.
думаешь если ты "распушишь, расщепишь, перетасуешь, зачередуешь" два электрода, можно станет в розетку включать через диод? проводимость не проблема вобще для крепких растворов едких щелочей, 20..60% KOH или NaOH водной и не нахватавшейся за день в открытой таре углекислоты из воздуха став некаустической содой(зато не ослепнешь, забыв очки надеть, от брызгов в глаза), я в консервной банке между двух болтов 0.1 Ома получал, газа всёравно столько атомов сколько кулонов электронов тока вдул в одну ячейку, лишняя толщина электролита и недостаточная площадь электродов, неэкономичное форсирование свыше 2..3вольт только опрелеляют трату денег на тепло
надо пакет последовательных пластин, сзазорами по краям не более 1мм а лучше как слайды или компакт диски в держателе вставлены, вариант с кучей средних пластин в океане, работает только двумя крайними, по пути 2вольтового падения потенциала, в обход трассы препятствий промежуточных пластин по 2в вноящих. тоесть "срезать путь в обход" по электролиту не должно быть скраю широкой дороги йонов, идеал примерно как собирают пакеты с резиновыми колечками, или найти крышки вставляющиеся в пластиковую трубу хорошо к внутреннему диаметру,юс зазором между внешним диаметром стальной круглой пластины и внутренним диаметром трубы корпуса 1..2мм, или даже 0мм
я сделал как матрёшку 6слоёв консервных банок, от персиков и меньше, 19в7А подаю, прожигает стальные и алюминиевые банки в любом месте, плавит сталь корпуса АТХ ИБП компьютерного стандартного 350вт системного блока толстая весьма, капля с горошину расплава стали формируется мешая дальше прожигать если ее не стряхивать... прожигает 1мм отверстие в кварцевой трубке лампы R7s очень акуратное не растрескивающееся в отличие от термостойкого стекла
Uou know in this video you can see his pure passion for his craft and the focus and effort its nice to see
5:30' use salt will make chlore gas, and it's dangerous if high concentration. You can use lemon juice or vinegar. You should mention safety when using acid sulfuric also.
Or we can also use Baking Soda
No it doesn't.
There are always hydrogen producing videos on RUclips. There are no hydrogen fuel cell creation videos. I wish you could make a video like this.
You need platinum for fuel cells, very expensive :c
@@aquafox8732 You may be right, platinum being expensive does not prevent video creation.
I've built a few HHO generators, and I see a few issues with his design. If he's intending on producing just hydrogen, then he needs to minimize the amount of negative rods because hydrogen is produced on the positive side and oxygen is produced on the negative side also I noticed that he's not using a spark arrestor or one-way valve. When the Flaming gas backs up into that accumulator tank it's going to explode like a grenade!
Isn't that what that vertical tube of water is for?
Umm.. hydrogen is produced on the negative electrode and oxygen on the positive not vice versa?
You can’t change the amount of hydrogen and oxygen produced by using more rods. They are stoichiometrically related, two liters of hydrogen must produce one liter of oxygen. Giving less surface area to oxygen production will only reduce the reaction rate overall since oxygen will have a bottleneck.
Yo también e realizado experimentos con generadores de hidrógeno y por lo general siempre se produce el doble de oxígeno que de hidrógeno , aparte que te equivocas el diseño si cuenta con un sistema anti retroceso, o también llamado burbujeador , se nota la poca experiencia que tienes en el tema , y yo más que defectos en ese diseño lo que veo es una tremenda inspiración para un muy potente cañón , solo es cuestión de hacer unas pequeñas modificaciones para que soporte una presión mayor de ese modo se obtiene un cañón que nada tiene que envidiarle a un cañón que use pólvora esmas creo que incluso podria superarlo pues la potencia explosiva del hidrógeno es enorme
Exactly!! Very dangerous because of back wave of detonation into a reservoir!
Hello, great video and good idea to use the inert carbon core of dry cells, but you have left the welds exposed, remember to isolate all the metals inside the HHO reactor otherwise all the metal anodes will disappear and that is why the electrolyte will get dirty and the use of inert carbon cores will lose all sense, but the assembly is nice.
Should probably mention which AA battery, because not all of them have that core. People gonna cut into alkaline batteries and make a mistake
And alkalines have mercury right?
it is a graphite/salt batteries
Nice job, excelent project HHO. Congratulation! 🤜🤛 SUBSCRIBED! 👍 Hug and sucess.
Un diseño tremendamente inspirador gracias por compartir la idea ❤ saludos desde Colombia.
5:20 The movie was great, well done man
Beautiful work 👏🏻
Congratulations, it was very enjoyable. I was also planning to make this device. The idea of this work came to my mind from the alcohol gun. I wanted to make something stronger than the alcohol gun. It works very well for the hydrolysis of baking soda and water solution. Good luck my friend 💯🎉
thanks for sharing this, i have an idea to make something,
How long will the generator work until them battery sticks get bad? Also when the battery things be completely dead (no electricity) Is there a way to charge them back into being conductive again?
This is the first time I seen your videos. Im so glade youtube recommend me to you. My mind was blown from the creation of this unit. I subscribed right away! Amazing work and cant wait to see more.
I don’t think the graphite rods would loose conductivity, but byproducts of the sulfuric acid could collect on the rod
Why didn't the flame travel into the pipe as HOO is being created? Thanks
You should keep the graphite, it can be used for other projects.
Didn't anticipate that explosion was gonna be planned and have a use.
great design
Great video! The concept of turning water into hydrogen is fascinating. What are the advantages of this hydrogen generator compared to traditional methods? Are there any safety risks to consider when building and using it? I’d love to learn more about the possible applications of the hydrogen produced. Thanks for sharing!"
I think better method is using acid and zinc or any other metal which dissolves in acids.
Dont suppose those rings you used were 3d printed were they ?
If so anychance in getting an stl for them ?
Using a battery rod, how long can the water last before it changes color?
BOOM !!!!!!!!!!!! ......... thanks for the video dude
Better than coil gun
Keren banget karya anda
Smart. Neve thought about using acid
It was wonderful, man❤
Also making copper sulphate solution.
That was awesome! 👍🏻🇺🇸
مهندس چه عجب ویدئو گزاشتی
I do first time see a face channel whrere these types of vidoes are showing real face - there are a lot of channels where making fake such devices and creator are hiding itself! So this Skill Make channel are legit and awesome!!
Your category name please❤
1st i thought.. Tony's Heart❤
Под конец стало интересно! Подписка и лайк
Amazing ❤️
Nice video. Love it🤩
May I know how many amps the current reading is during this electrolysis process
A cell like that isn't going to last all that long though as the materials used simply can't withstand the process of breaking the bonds of the water molecules without the water breaking them down in return. The electrodes are all going to breakdown and even the copper wire in contact with the liquid will breakdown into the solution in a short about of time. It's the reason why so many use Stainless Steel, Nickle, or Platinum, or some other material that have a high anticorrosion factor.
How did the syringe needle stop the fire from blowing up the bubbler
Why use the coil electrodes, if anyway the metal wires is deeped in electrolyte?
❤بسیار عالی .
So nice . So good . Very interesting video
ممنون 🤗
Find a cone-shaped can so that the explosive gas will be more concentrated and more powerful?
This is not a Hydrogen generation but a mix of Hydrogen and Oxygen.
For those reading comments, stainless steel works just fine dont go opening batteries 😭
what are the dimensions of the blue circle
Please make a video on making high powered air gun
this is parts maked by 3d printer?
Nice 🎉
Does sulphuric acid not react with the graphite rods??
With real graphite - not much (although it somewhat depends). However, those rods from batteries are not a graphite, but pressed carbon, and tend to disintegrate disappointingly fast into carbon powder during electrolysis.
This great
plz do video with solar panel, hydrogen fuel cell, hydrogen container, hydrogen fuel cell, then light. (storing solar power in hydrogen battery.
❤️🔥
Maaaaahhhn....you have a tungsten balls to press those button...
Amazing good
Thank you so much 😀
یه همچین ویدئو با کیفیتی قطعا زمان و تلاش زیادی میطلبه ... واقعا دست مریزاد
نمی خواستم کامنت فارسی بزارم ، ولی نشد، ببخش😊😂
Go out into the field and shoot at a variety of things, you will be successful.
Using butane or propane is cheaper. 90% isopropyl alcohol (disinfectant for first aid) and kerosene can work too.
А вы знали, оказывается продаются электроды для сварочного аппарата из графита☝️
Странно что в фалаут так и не сделали самодельную водородную пушку😅
Energi listrik yang di butuhkan berapa volt ampere
О, известнейшие батарейки пенонсинг, фуджисоник и панасканик...😂
Where r the plans ,i want to make one
Or: how to blow your hands away when the gas presure reduces, and the gas flow is slower than the burn speed.
That sir.. Is a timed grenade
wow
I would think that making a dry cell unit would be easier than this.
RUclips allows this but takes down brandons prim minister shotty.
That’s a bomb waiting to go off
عالی❤
Just how to make a voltage step up circuit
Я один ждал, когда у него Верхняя колба Бахнет в дребезги, это Опасно...
should make one for a potato cannon, no one has done it
Доктор Дью! Ау)
how much hight voltage. ????????
i want this
When I see someone revitalizing nuts with pliers, I ask myself, does he not have the right key???
Like a nuckler reaktor
That thing is for single show only and will not be durable. Metal parts are exposed to solution and will corrode like hell, especially on anode and especially using sulfuric acid. Carbon rods from batteries are not especially great as electrodes either, but metal parts will fail much faster than them.
as a jobless Mallu I got an idea from E waste
My FREE ENERGY installation will charge these batteries
There’s no free energy bro.For everything in this world first you should give,then get.
Bro must be from Asia .. only they beleive in free energy
Free energy doesnt exist.
Now tell this to electroboom 😂😂😂
@@Din9mir its a joke bruh
There is something else in the video and something else on the thumbnail. This is misleading
А что если разлогать воду это грех??
Conectar con nikel en el interior
hydroxygen generator not only hydrogen !
Hydrogen are known to be very explosive, your lucky you didn't over fill the combustion chamber
battery "Penonsing" O_o??? ok XD
Thats not a hydrogen only Browns gas - HHO. He also used KOH which will leat through the solder, metal contacts and copper in no time . Waste of time, use stainless steel and arrestor when burnings the gas.
La percentuale di acido ?? Il resto tutto ok !!
hence the ability to drive a car on water ! Use the explosion to produce a motion ! IE up and down and tranlare it via gears into circular motion! ... Now we havea n electric car which drives o water ( or Sulpuric acid ! ) and the electric is not driving the car its the hyrogen generated !
hence to make a engine casing for this to make a vehicle !
IN fact in SPACE ! this type if action would be a good long term Feul to drive a ship !
The solder joints will corrode way that acidic environment also the test was pretty useless because you didn't test the joints in that corrosive liquid.
Te robaste mi idea. El rifle de hidrógeno iba a desarrollarla yo mismo
Sirve para los comunistas? 😅
What anger do you have against water melon in the US as one is always use this innocent Cucurbitaceae as a target practice: Btw this is not an hydrogen generator but a O2/H generator. One has to separate them to get the H2 generator.
ما ک دسترسی به سولفوریک اسید نداریم چیکار کنیم
پودر لوله باز کن استفاده کن جوابه
@@skillmake⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
You can use baking soda
@@2N2-DIY tnx
Naoh
Second comment pls pin
Robinson Frank Martinez Jeffrey Gonzalez Anthony
Actor Wi-Fi router banai dekha
Дешевле разобрать карандаш
misleading though cause this is an hho generator not an h generator
All these efforts to cut a watermelon?...
Beautiful work my ass.
Pal, check those wires in soloution regular, less you want a personal grenade ! One spark and boom goes the wet cell.
Or find out. Plenty of videoes showing bad results.
Check hho for life, if you want a strudier model and a grt flash back arrestor.
If the wire was plated s steel of some thickness, I wouldnt worry. But its mere wire that can be corroded, once enough a spark gap will be created.
One day you will turn it on unaware, and may loose an eye.
Cheap build yes, safe hell no.
думаешь если ты "распушишь, расщепишь, перетасуешь, зачередуешь" два электрода, можно станет в розетку включать через диод? проводимость не проблема вобще для крепких растворов едких щелочей, 20..60% KOH или NaOH водной и не нахватавшейся за день в открытой таре углекислоты из воздуха став некаустической содой(зато не ослепнешь, забыв очки надеть, от брызгов в глаза), я в консервной банке между двух болтов 0.1 Ома получал, газа всёравно столько атомов сколько кулонов электронов тока вдул в одну ячейку, лишняя толщина электролита и недостаточная площадь электродов, неэкономичное форсирование свыше 2..3вольт только опрелеляют трату денег на тепло
надо пакет последовательных пластин, сзазорами по краям не более 1мм а лучше как слайды или компакт диски в держателе вставлены, вариант с кучей средних пластин в океане, работает только двумя крайними, по пути 2вольтового падения потенциала, в обход трассы препятствий промежуточных пластин по 2в вноящих. тоесть "срезать путь в обход" по электролиту не должно быть скраю широкой дороги йонов, идеал примерно как собирают пакеты с резиновыми колечками, или найти крышки вставляющиеся в пластиковую трубу хорошо к внутреннему диаметру,юс зазором между внешним диаметром стальной круглой пластины и внутренним диаметром трубы корпуса 1..2мм, или даже 0мм
я сделал как матрёшку 6слоёв консервных банок, от персиков и меньше, 19в7А подаю, прожигает стальные и алюминиевые банки в любом месте, плавит сталь корпуса АТХ ИБП компьютерного стандартного 350вт системного блока толстая весьма, капля с горошину расплава стали формируется мешая дальше прожигать если ее не стряхивать... прожигает 1мм отверстие в кварцевой трубке лампы R7s очень акуратное не растрескивающееся в отличие от термостойкого стекла
???