HOW TO VINYL WRAP PROPERLY
HTML-код
- Опубликовано: 26 июн 2022
- If you enjoyed the video please like, share and subscribe! Daily tinting, wrapping, and PPF uploads.
Follow us on Facebook: / midnightprotectivefilms
Follow us on Instagram: @midnightprotectivefilms
Follow my personal Tik Tok: @chadmfive
#shorts #mpf #midnightprotectivefilms #tesla #model3 #vinylwrap #averydennison #wrap #porsche #911 #993 #gt2 #911turbo #porscheturbo #lambo #lamborghini #urus #suv #ferrari #812 #812superfast #italian #hummer #hummerev #mercedes #benz #s580 #xpel #ppf #mercedes #benz #s580 #chromedelete #volvo #swedish #bmw #mercedes #benz #bimmer #m3 #m5 #alpina #hummer #hummerev #electric Авто/Мото
Spread it like Riley Reid she says 😂
lol yeah!
We can’t be the only ones who understands this comment 🤣🤣🤣🤣
Forgot her, hahahaha
Can't see these actually lasting unless there is a gallon of primer under there. That much stretch without any heat to relieve the stress will only cause premature failure. Unless you're trying to show people how to incorrectly install vinyl so they screw it up and pay you to do it.
that is exactly what theyre doing bc you can see in their other videos that they use primer
They aren’t experienced
Look up post heating
Yes it is a fail for sure. Thats way too much stretch. As soon as the heat from the sun hits it. It will start to snap back to its original shape smh.
It’s called post heating. You heat it to 180 degrees and it the adhesive pretty much cures and will not peel or shrink. Easy shit I’ve just done my car in satin red
Pulll!! Stretch!!! Let me see those wrap stretch marks baby! Nothing scream great job faster than stretch marks and discoloration on a fresh wrap.
😂😂😂😂
Guys you need to use heat, that SAV will shrink within a month. Cast SAV is supposed to be heated, then wrapped...
Your wrong there
@@Smokey5ohh I bet I'm not, I've built a career knowing all about Cast, Polymeric, Monomeric vinyls (printed or colour)...
P.S. its you're not your
@@redfarn1 ikr the irony of someone writing “your wrong there” and they use the incorrect “your” instead of you’re. I can’t even understand how people can’t grasp the difference. All they have to do is think for 1 second, am i saying your/possessive or you are. It’s that simple. Common sense is not so common.
"Keep spreading Riley Reeds"...🤔🤔🤫
Probably what he said while on the internet. Lol
More like Adriana
Even I know , never doing it and just watching videos that you need heat so it doesn't fail!
This is awful advice, especially for 3m or Avery film. They will have have severely bruised adhesive at the high contact points and aggressive pull up at the non lost heated areas. The edges will split if properly post heated do you over-stretching. Do not do what these fools are doing
Idk what you said but, yes! ! !
Can the wrap be over-stretched and become thin and tear?
“I don’t really need that much pull” “COME ON MAN PULL THAT THANG”😭😂
RILEY RIEDS PART WAS CRAZYY😂
Riley Reid made me jaw drop 💀💀💀
Satisfaction guaranteed
Wrong way to wrap. You can only stretch that much stretch going sideways so that the tension is less towards the front end. Less shrinkage, less unraveling. They are rookies
You sound exactly like i thought you would … dumb lol wrap has stretching properties to an extent Amd also has a memory. Make glass squeegee and post heat .
This is why I'm heistiant to get my car wrapped
you shouldn't, but you need to find someone who knows what he's doing. These guys here are obviously self taught and know absolutely nothing about their material. It's like that with everything you buy that's handmade, there's people who know their job and people who don't. If you find a good wraper, you'll be happy with your wrap for a long time.
Moral of the story SPREAD! 😂
You can do this wrap without stretching. Easy hood, take time and you dont need heat or stretching. Maybe for the corners, but not for the flat areas. So the complete hood
I wanna see how that looked in a week
I’ve only watched videos from wrap academy and ck wraps and I can tell you this is going to fail…
Im just now getting into wrapping, specifically on the inside. Watched a few videos and can already tell you that they shouldn't be stretching it this much.
Holy shitttt fastest hood rap
That needs some heat
I've never seen anyone stretch the vinyl for one little wrinkle. Literally get the vinyl glassed out, get the big wrinkles flowing in the right direction, THEN STOP STRETCHING - especially around edges.
Next min it just goes KAHBOOOM and rips
What brand of wrap do you use? 3M?
Farrr out! 1 month warranty?
Why are you putting so much tension on the edges? Is it a marketing tactic to get DIYers to fail and come to your shop?
the more you pull it... the thinner it is... and I think it makes it less durable. You have to consider the Sun.
One profession where you want to see beef curtains
Felt like i was watching BRF
What kind of vinyl wrap is this cause the kind I had was not this stretchy
cool
What’s the size of the wrap?
I can imagine how much sanding it’s doing by pulling it against the surface.
Sanding FTW
What about the dips n stuff
Wouldnt the stretching weaken the Vinyl when its set on the car and rip later on.
Yup
Any adhesive needed?
how long will this wrap last after all the spreading!!!!!! under a year and it will start pealing, and pealing and keep pealing riley reads
Pull it and spread...words to live by.
I have never wrapped anything other that some interior trim pieces and this does NOT look right to me lol
Hey guys I’m new to wrapping cars and have a question. I thought you Can stretch the wrap up to 10 percent and everyone’s saying this is wrong. Why is this wrong? I’m just asking so I don’t make the same mistakes
The sound of vinal wrapping could put me to sleep
Thats a little tooo much stretch 😭 U want the film as relaxed as possible obviously in some scenarios its ok for some stretch in order to gain glass but in this case its a little too much for my liking but hey if you heat gun it and it dont shrink ig you’ll be ightt
About how much
How much for ah wrap
How can I get material for rap please 🙏
Riley who now?
yeah, yalls wraps fasho fail. Cold stretching that much LMAO would never take my shit there. im an installer myself, this is horrendous
Same here bro. They fighting all the shit where all they had to do is cut back the extra bleed. Heat to relax it, glass it and cut it smh they trash
I beg your pardon?
I can tell that’s 3M or Avery or Cheetah based on how thin it is ( I can tell by how pliable it is without heat. ) that being said, way too much stretch, also not supposed to stretch and edge or it’ll recede.
Surely that's too much stretch. The heat from the sun will make that snap back around the edges 😢
damn, that shit is gonna stick like a wet piece of cheese and lift in a week
We still talking about wrapping?
Riley Reid 😅😅😅
Like 90% of the install is done just by rolling it on. Pretty good method
Terrible method
Where to get vinyl wrapping this big and pink?
tinybot
This is actually how not to wrap properly 😂
That wrap is now uneven and high contrast points
They messed up the original piece so now they are stretching leftovers to make it fit
Keep spreading 😂
Boss, we are a car wrap factory, can do wholesale and retail. our products are diversified, professional paint protection film and automotive insulation film. You can learn about our products.🎉
this only works if ur using chinese vinyl and expecting the wrap to fail after a month
this is why you cant just pay any shop to wrap your car lol sucks th customer either doesnt know or woud be mad if he knows
God loves you!!! Stay safe!!!! ✝️💜✝️💜 don’t forget to thank Him for the day!!! I hope you get everything you want and more!!!! Stay blessed!!! ✝️😇💜🙏🏽
Most of us won't have 2 people... aren't they doing everything other have said not to do, like severely stretching pass the edge
Wait what..? Keep spreading Riley reids? Lmao
Wtf!! Why are you stretching like that???
I have 06 vw beetle, can someone let me know how much vinyl I would need to wrap the entire vehicle?
2.5k minimum for a decent job
Who wraps a beetle tho😂
#AndSpreadX3
“Pull the bad boy”. WTF
Why wouldn’t you just do stealth of since the cars already black…
You meant “how NOT to wrap a car”. Stretching the paper like that is not the way to do that job
Not the right way to wrap lol but ok the tighter you pull that the more it changes the color and you’ll see lighter and darker spots you’re high if you think that’s proper
NOOOO! Don't fucking stretch it
Spread it like a prom date
That was unnecessary 🤣🤣
Way too much tension
Is this for real? Cant be. No way this shop makes money wrapping vehicles.
Too much tension on the edges
Way to much stretch for a hood 😂😂
If you want it to lift in a couple months u pull that hard 🤦♂️ always make sure to pre heat
Dont overstretch
Don’t take your car here lol
That wrap is gonna start peeling up once the heat hits it horrible way of wrapping…
👁️👄👁️
😂😂😂
I don’t understand why people want this thing on cars. Yeah yeah you will say it keep your paint in mint condition and keep your resale value if this this being done the right way and a lot of people don’t keep there car long enough and at the cost of 2000$+ there’s your resale value down the drain.
To make the car look better duh
Will fail. Over stretched on edges. Needs enge primer also. RUclips wrappers 😂
Buy nice car put this. Shit on it y😩😧😖
Terrible to introduce so much memory into the film. Not a good technique.
This is the perfect example for NOT how to wrap your car.
This is way over stretched
This hurt to watch
this is wrong ,🙅🏽... I can teach you best way of wrapping that bonnet
omg, you have no idea what you are doing ^^
Overstretched.
Pull th badboy. Lol. This computer voice is sick. Literally makes me sick 🤢
That’s fucked up
no no no no
You can tell the difference in their skill level. Can we see the whole installation? Satisfying.
what difference? This will fail in few weeks mate..
This is awful, this is not how you wrap😂