I did it a little different, giving me dig on front as well. Mix 1 is front axle and ESC is plugged into ch3. Throttle is master, ch3 slave. Mix 2 is rear axle, ESC plugged into ch4. Throttle is master, ch4 slave. So on the receiver nothing is plugged into ch2. I assigned sw2 and sw3 to turn the mixes on and off. The thumb wheels tr3 and tr4 do the high side mix values. I got the pro as well but I still have it set up this way.
Yeh there are many ways to do it just depends on what you want to achieve and how you like it to work, to get the same on the pro is so much easier vid on that is next :)
Nice videos as i Need assistance ony moa but how about the wire battery care to share how to solder for both esc battery wire so basically one lipo to power both esc instead.hope you can produce a video as i request.thanks and have nice day ahead
I have a little Redcat Danchee with 4WS, counter steering, crabbing and rear steer. The only thing it doesn't have is dig.....which I would like to have (greedy, I know). The OEM transmitter will not allow the addition of another function so I hope to set up my NB4 to control the Danchee. I purchased a "electronic dig" unit from RC4WD which connects between each motor and the ESC/receiver unit (which of course has 3 channels only.....two for the steering servos and on for the ESC/power lead. I'm hoping that with a new 4 channel flysky receiver and new esc...that I'll be able to have all of the steering functions as well as the new dig capability. I'm pretty much a newbie to this hobby so I apologize if I sound a bit daft. Do you see a way of making this work with one ESC or will it require two...even with the electronic dig unit? Your videos are very helpful and I thank you for your time and effort.
I did it a little different, giving me dig on front as well.
Mix 1 is front axle and ESC is plugged into ch3. Throttle is master, ch3 slave.
Mix 2 is rear axle, ESC plugged into ch4. Throttle is master, ch4 slave.
So on the receiver nothing is plugged into ch2.
I assigned sw2 and sw3 to turn the mixes on and off. The thumb wheels tr3 and tr4 do the high side mix values.
I got the pro as well but I still have it set up this way.
Yeh there are many ways to do it just depends on what you want to achieve and how you like it to work, to get the same on the pro is so much easier vid on that is next :)
Hello Chris. Yes i see your vidéo on Bully FB page and i'm doing has you :)
c. leech , thx , your config worked for me , i can get front and rear dig now .....
Is it possible with a wheel transmitter, to control rear and front motors independently as is doable with a stick transmitter?
Yep just assign the rear motor to one of the dials so you can control it or set up mixing so you can change the off set :)
Is there any way to set up a dual esc on a moa with either the fs gt5 or the fs g7p? Thanks for any info you might have.
G7P would be able to do moa setup easily
@WTFRCCars do you by chance have a video on how to be able to set that up?
ruclips.net/video/g6ZBriI_xAg/видео.html
Some thank u
Awesome, not some
Nice videos as i Need assistance ony moa but how about the wire battery care to share how to solder for both esc battery wire so basically one lipo to power both esc instead.hope you can produce a video as i request.thanks and have nice day ahead
I would just make a y cable from one battery to a plug for each ESC :) that way if you ever need to replace one of the ESC it's really easy
Thank you for the tips and advise and heads up.have a good day ahead.
I have a little Redcat Danchee with 4WS, counter steering, crabbing and rear steer. The only thing it doesn't have is dig.....which I would like to have (greedy, I know). The OEM transmitter will not allow the addition of another function so I hope to set up my NB4 to control the Danchee. I purchased a "electronic dig" unit from RC4WD which connects between each motor and the ESC/receiver unit (which of course has 3 channels only.....two for the steering servos and on for the ESC/power lead. I'm hoping that with a new 4 channel flysky receiver and new esc...that I'll be able to have all of the steering functions as well as the new dig capability. I'm pretty much a newbie to this hobby so I apologize if I sound a bit daft. Do you see a way of making this work with one ESC or will it require two...even with the electronic dig unit? Your videos are very helpful and I thank you for your time and effort.
Electronic dig should work just by cutting power to one motor :)
This was just the video I was looking for. Thanks a bunch for the info. Keep up the excellent work 👏 👍 👌
Happy to help :)
Another cool quick set up video for the collection.... :)
Glad ya like it :)
Tanks! Helped me a lot!
Glad ya like it :)
Yayyyy! Thank you!
Glad ya like it :)