How To Joint A Patio Using Easy Joint From Azpects With Johnyboy!
HTML-код
- Опубликовано: 1 авг 2017
- www.azpects.co.uk/
How to Use Easy Joint the brush in grout from Azpects. These are the same guys that have brought us the Easy Seal and deck magic products.
In our hands on review we discuss the pros of using the brush in formula over conventional jointing and grout methods.
Channel:ttps://ruclips.net/channel/hUCqjAkl0Kj2W...
WebSite: greentoplandscapes.co.uk
www.greentoplandscapes.co.uk
Twitter: /twitter.com
Facebook: /GreentopUK / greentoplandscapes.co.uk
www.google.co.uk/webhp?source...
Did not know that's why I did a 6x1 mix when doing my path 👏👊
Really helpful I enjoy watching your videos always learn something nee
Good video matey, I'm a traditional man my self and have used mortar toner to alter the colour before, but there no doubt easy joint is a good product and look great with certain types of slabs and reall is so much quicker than being on your hands and knees.
Top work lads good information Jonny 👍👍
Great info john.
Looks like a great job on the patio laying..should u think after laying any should be loose..if any we're loose what do u think that issue would be after laying with dry mix..exact same slabs 4 sizes
Weve been using easy joint for over a year now what Ive found is the lighter shades tend green up over time so you end up with green jointing also the tubs are small at only 12.5 kg compares to joint it 20kg for the same money but these products do have a place but not on every job depends on the weather & what the customer wants to pay for. personally i prefer JB,s way of cement pointing
Johnnyboy, I'm tring to work out whats best to use for my parents patio regrouting job. My dad tells me the base is concrete on clay. So sand and cement mix (with or without lime?), EASY JOINT or Sika fast fix. It's the concern with the permeability of the easy joint and Sika that water will penetrate down to base of the grout, have nowhere to go and freeze when temps drop; leading to cracks. Tha, as well as when doing the grouting, will the deeper areas 50mm dry out well enough from having them really wet from the amount of water needed when installing the EasyJoint. Any advice will be very welcome!
really interesting point re mix strength. I've used a few sweep in products and have wondered about water dispersal before. I've traditionally laid on a 4:1 mix for patio and mostly point with sand and cement as I prefer the look of it but again the points you make are totally valid. (I'm currently enjoying an afternoon off laying a patio due to the rain today!)
Great video and great tip about the 6:1 mix ratio. One question I do have is soon I'll be laying a new patio on top of an old one and I'm a bit worried about the drainage reqd, again going back to why you say you use that mix ratio. Do you think this will cause a problem for EJ?
My builder used something similar to this. Don’t know if he did something wrong or if it was the weather but it’s all cracked and lifted. I can pick it off in long chunks now. Of course he will not come back to take look.
Having had so many problems with traditional pointing, as you said with the weather and low temperatures, I'm always using easyjoint now. Pointing's not so much of a bitch anymore, it's a shame you can't finish it as smooth though.
Hey! Watched a few of your videos now and appreciate all the info. Have a question.. I have the easy point and also a wet look patio treatment. What's the best order to apply these? TIA
Hey. Good job. What is the brand name for the pavers? They look great! Thank you!
Hi johny I have just fitted easy joint a couple of days ago I sealed my sandstone flags before I used easyjoint would you seal again in a few weeks once fully set and seal over easy joint or not to keep it permeable. Thanks
Great advice 😎👍
I've just finished laying a 20m2 smooth Indian Sandstone patio (DIY job). I'm going to grout using Easy Joint. Is this something I could do shortly after laying the patio?
Hi john, I’ve just laid 22sqm of sandstone at 3 sharp 1 soft and 1 cement, I’ve just bought a few tubs of mushroom easy joint but now I’m worried that the bed mix is too strong and the water won’t disperse. You said on the vid it needs to be at least 6 / 1. Cheers
Hi, iv layed an autumn brown Indian sandstone over the summer but managed to mess up the pointing, is their a way of fixing this or will I have to just take it all out and redo using that stuff your using in this video?
Can we mix jointing sand with dry cement to fill the gaps then wet it after?