Cv boot clamp tool for the metal cable ties, never done it but wetting the wrapping material is sposed to be good to stop the fibre glass itchyness, that carbon bonnet looks sweet
Thoes stainless ties are always like that. I usually put them on, cut the tie down to leave about 1 cm, then with long nose pliers roll it back on itself and this really tightens it, then tap it with a small toffee hammer and flatten it.
I was told that the boot clamp tightening tool is good for doing them properly. I’ll get a set and give it a try with them. See if it makes any difference 😅
please much Infos about Fuse relocation. I want to change a wire from that. How thick (mm²) ist the Wire from the Battery, what he use. I have a Liion Battery and I want use new cable. Thank you. Thanks, interesting content.
Just a note. If you have a wagon and relocate battery to trunk, this is considered in the car and battery box must be sealed and vented outside. I dosent matter what battery you have, even if its a sealed battery ìt won't pass an English M.Ò.T. as someone may change the battery for a vented one and not realise.
Battery relocation starts at 3:24
Just found your channel, instant sub!
Thank you buddy! Much appreciated ❤️
Great video as always! Enjoy watching 💪🏻 waiting for the next one!!
Thank you YA MELECH! ❤️
Pleasure seeing this progress! Dyno day is so near! :)
Yes it is!! 🤗🤗🤗
Look at that smile!! 🤘🏽🤘🏽🤘🏽
Yalla dyno!!
Yalla balagan 🔥🔥🔥
Cv boot clamp tool for the metal cable ties, never done it but wetting the wrapping material is sposed to be good to stop the fibre glass itchyness, that carbon bonnet looks sweet
Thanks bud!
I’ll get that tool for next time and hope for a better result 😅
GREAT WORK
Thank you! 🙏
Thoes stainless ties are always like that. I usually put them on, cut the tie down to leave about 1 cm, then with long nose pliers roll it back on itself and this really tightens it, then tap it with a small toffee hammer and flatten it.
I was told that the boot clamp tightening tool is good for doing them properly. I’ll get a set and give it a try with them. See if it makes any difference 😅
2:10 There's a specific tool for that. Called a Steel Cable Tie Tool aka a "Zip Gun"
Cheers 🙏🏼
Лайк брат!))
Спасибо, братан ❤️
Did you put a fuse in the engine bay? If so, what model/size and amps?
The battery feed goes through the factory main fuse that the alternator was originally connected to.
please much Infos about Fuse relocation. I want to change a wire from that.
How thick (mm²) ist the Wire from the Battery, what he use. I have a Liion Battery and I want use new cable. Thank you.
Thanks, interesting content.
Cable used is 35mm thick.
I'll make sure to do a detailed video when we relocate the fuse box. Cheers!
Just a note. If you have a wagon and relocate battery to trunk, this is considered in the car and battery box must be sealed and vented outside. I dosent matter what battery you have, even if its a sealed battery ìt won't pass an English M.Ò.T. as someone may change the battery for a vented one and not realise.
Good to know! Thanks 🙏🏼
Can you relocate my Tesla battery into your trunk?
Will it make my car faster?
@@TheGCJourney it will make it yellow
@@dooflexible
גם משהו