RC Rescue boat build FeiLun FT012
HTML-код
- Опубликовано: 22 авг 2024
- My old rescue boat system uses nylon string and ping pong balls which always got tangled up.
So after doing some research online i decided to build this rescue boat which i think is a much better solution.
If you notice any flaw in the design do share your views in the comments below.
PVC pipe size correction: 1/2 inch used not 3/4 inch
FT012 mod video series here: bit.ly/2HnaSSM
just wanted to say awesome video! the best one on youtube for fabricating a rescue boat, i just bought the ft009 to rescue my ft011....cant wait to get my ft009 to start making it into a rescue boat thanks to you video!!!!!
Thank you, glad you found it helpful.
Wow is that awesome, I just happen to have this boat. But I have a Spartan that is a awesome design I will be making one for sure thank you for sharing this info I'll be watching for more
Thank you, glad you found it helpful.
do you think it would be possible to fabricate this with 1/2 inch pvc pipe for less weight on the boat?
if it can fit the pool noodle, i guess it would be ok but the worry is drag issue. There is a significant drag with this design. I have another design but have not started working on it yet to test how much drag is reduced. Once i have the time to do so I will upload it. You can have an idea of the performance for this design in this video bit.ly/2uofPG5
TOP STUFF TOP JOB
Thank you kind sir!
If that is PVC it is 1/2 inch not 3/4 inch. How does the rig retreive a boat?
it is 1/2 inch not 3/4 inch, thank you for correcting but both size can be use depending on your need and preference. The boat that needs rescue is collected between the fork and pushed back to land.
hi, where did you get the pvc pipe? home depot carries minimum 1 1/2 inch....i cant find smaller diameter...
Home depot do have 3/4 inch pvc pipe, maybe you could make query with them, as it might be momentarily out of stock when you last checked. I got most of my items from a giant rubbish bin of a house under renovation.
www.homedepot.com/p/JM-eagle-3-4-in-x-10-ft-PVC-Schedule-40-Conduit-67454/100129197
hi..... can u help me do 1 set...i have the ft012 .....i will pay u for the items... can? 98949090 whatapp me ok..
@@hwmate10projt40 This is a DIY project, i shared it so others interested to DIY built it may get some ideas, if you have any questions i will try my best to answer them.
hey would this fit the ft009 model?
Yes because FT012 and FT009 is the same design just one is brushed motor and the other is brushless