How to Install LED Resistors Fix Turn Signal Hyper Flash/Error Code?
HTML-код
- Опубликовано: 2 авг 2024
- How to install LED resistors to fix turn signal light hyper flash or headlights, fog, brake tail lights flickering or error code?
Here are 2 types LED resistors popular in the market: plug-n-play version and the other Universal resistors", below is the time line:
Here is the plug and play resistor version is for dual filament turn signal resistors, if just headlights or fog lights, or single filament, just one side connecting the stock harness, and the other side connecting the bulb, and attach the resistor's metal part to the vehicle's metal part, and avoid any touch of the vehicle's wiring or plastic part.
Time Line:
Introduction: (0:00)
Plug-n-Play Resistor Installation: (1:12)
Universal Resistor: (2:05)
Due to LED bulbs draw much less power than stock lamps, when replace | install LED blinker, brake tail, fog light, headlight, DRL bulbs, load resistors maybe required to fix signal hyper flash or error code for cars, motorcycles, trucks, etc.
CANBUS LED turn signal lights bulbs options as below:
BAU15S/7507/PY21W: allalighting.com/products/can...
BAY15D/7528/1157: allalighting.com/products/can...
T20/7440/7443: allalighting.com/products/can...
T25/3156/3157: allalighting.com/products/can...
This video covers a lot information as below, hopefully it is helpful for you:
1. The reasons for LED lights bulbs' hyperflash, flickering or error code: due to the led bulbs draw much less power than stock lamps.
2. Two ways to installing the load resistors: One is installing plug-n-play load resistors (restricted in socket type and stock lamp's bulb size), the other is installing universal load resistors (compatible for all vehicles) step by step
3. How to tell CK or standard socket roughly for 3157 or 7443 socket type bulbs
4. How to tell wiring of the signal light and brake light and easily help to install correctly
5. Load resistors products' options link is: allalighting.com/collections/...
Thanks for your watching, if you like our videos, please thumbs up, and subscribe with us with more installation videos for you. 
Авто/Мото
This videos shows how to install the load resistor step by step to avoid the signal hyper flash or error code on the dashboard when you upgrade the auto light to LED, thanks for your watching, if you like our videos, please thumbs up, and subscribe with us with more installation videos for you.
I just realize the mileage of this Ford crown Vic is almost or probably already surpassed 1M miles. Ford use to make great cars. As a Toyota/Scion fanatic, this is amazing.
Modern ford that they lost the quality of their vehicles will not reach this mileage now. Unless they drive on the freeway every single day.
That’s incredible for the crown Vic. Pure bullet proof.
Thank you for the info
Thanks so much.
Awesome vid thx!
That is great, we are glad that is helpful for you. Thanks for your watching as well.
Do I need a resistor for each light or one per side?
@AllaLightingAutomotiveLEDBulbs
U did say that the load equalizer resistors plug-and-play version kit will work fine on 3157 from any vehicle. But it’s made for standard socket only.
Then again, if the led bulb is compatible for both CK socket and standard socket, than the plug-and-play version load equalizer kit can definitely work correct?
Meaning that we have 2017 Toyota sienna LE with a front 3157A with a CK socket.
And putting load equalizer resistor plug-and-play kit that had a standard socket on to the CK socket.
If we put an led turn signal bulbs that’s compatible for both CK socket and Standard socket, it will function well between dim function and turn signal function?
Hi! I’m trying to do install this to my ‘14 Chevy Sonic. I don’t know which to go with and am not really experienced with this kind of thing
@AllaLightingAutomotiveLEDBulbs
Also do we need the dual resistors version of the plug-and-play load equalizer resistor for 3157A because of the two separate circuits for dim function and turn signal function?
Or just one load equalizer resistor for each side, is enough for both dim function and turn signal function?
Do you still need to install resistors to the front signal bulbs if there led or does putting the rear resistor effect the front as well 🧐
Yes, unless it is CANBUS Error free LED signal lights bulbs
@AllaLightingAutomotive
For 2017 Toyota sienna LE, would a pair of fix plug-and-play version load equalizer resistors that has 50 watts, will be enough to delete the hyperflash for front and rear?
Or do I need another pair of fix L.E.R. For one pair for the front, and another pair for the rear?
i just did that like weeks ago when i hit the brake on my wv jetta works good flash 3x and then solod and the signals all good , but when i try to turn on the parking lights start to flashing
I have a 2017 Chevrolet Silverado 1500, with aftermarket led tail lights.. My turn signal lights up on the top and bottom of the tail light.. My question is do I need 2 resistors for both upper and lower bulbs??? Thank you
Hi 👋 so i install this on my crv, the plug n play. So you said its goin to be super hot the both heatsink housing.. so its true.. so it mean keep away all the wirings? And you can really smell it inside the car, is that still okay?
Where would I Mount on a 2015 jeep Grand Cherokee?
For a 2017 GMC Sierra where do I put the 4 resistors?
what plug and play load resistor do you sell for a 2012 camaro rear turn signal?
use the plug in play alla lighting resistors the ones in this videos i have a 2010 camero 2ss an had the same problem plugged the plug in play resistors in an never had any warning on the dash or anything they work great 👍🏽
I have the plug and play set how do I remove them out of the headlight housing
Have you installed them already? or are you going to install the plug and play load resistors set?
Alla Lighting Automotive LED Bulbs yes and I’m trying to remove them.
@@kevinbradwell659 If so, just please power the vehicle off, and then disconnect the wiring between the load resistors and bulbs, and then you can remove the load resistors, please make sure not touch the metal load resistors part when it is hot for it may hurt
Wont work on my gmc canyon still flashing fast and it warm
If one resistor make it flash you need two resistors..i just went through same thing on a camry..you also don't need another resistor at the front..the two resistor will make up for the front..hope this helps
Do you sell canbus ready Leds?
Thanks for your question, yes, we do have some canbus LED, would you please advise your vehicle's maker, year and model for further assistance? and also please advise what type of the bulb you are looking for, like headlight? front turn signal light? rear turn signal light,etc. thanks in advance.
Can I cut the unnecessary resistor out of the plug & play?
Yes
wrong hardware for that... looked like a wood screw