Making a DIY Metal Band Saw - The Band Saw Wheels!
HTML-код
- Опубликовано: 5 фев 2025
- This is the fourth part of my DIY Metal Band Saw project. This time I show two ways of how to make a band saw wheel. One of these wheels were made by PCBWay.com. I sent them a drawing and they sent me this part for this project to show you their possibilities. The second one will be made out of scratch by me
If you have a part you'd need but you don't have the possibilities to make it at home - send a drawing to PCBWay.com. They probably will be able to make it for you. Worth to check it out.
If you'd like to check out their manufacturing possibilities - link available below:
👉 www.pcbway.com
If you find my channel interesting or helpful - you can consider becoming my Patron on Patreon.com or a Member of my RUclips Channel Support!
Subscribe and hit the like button if you like the video and want more!
👉 / gbwm
👉 / @gbwm_cnc
Questions? - Comment down below.
Thanks for watching!
CNC Conversion of a Milling Machine: 👉 • CNC Conversion - Manua...
Milling Machine Restoration: 👉 • FUS 200 Universal Mill...
DIY CNC Metal Lathe Build: 👉 • DIY CNC Metal Lathe Build
Machine Builds: 👉 • Machine Builds (full v...
CNC Videos: 👉 • CNC
Welding Videos: 👉 • Welding
DIY: 👉 • DIY HowTo
Facebook Page 👉 / gbwmcnc
RUclips Channel 👉 / gbwmweldingmachiningcnc
Twitter 👉 / gbwm6
Instagram 👉 / gbwm_cnc
Tumblr 👉 / gbwm-cnc
TikTok 👉 / gbwm_cnc
good job GBWM
Thank you Michel! :)
Good job✌️
thank you! :)
Kawał dobrej roboty 👨🏭👍
Dzięki 😁💪
Always excited to see this🥳🥳
The part fits perfectly! :)
@@GBWM_CNC ✌✌Let's do something BIGGERRRR💥
Wow that's amazing
How much this motor.
3 phase
I want that but my house only 2 phase
I can't found metal saw here
I bought an used one :)
The same but here overkill the price
@@mr.ranyhomemade2466 Yes, it's not cheap but it's hard to obtain these speeds without the reductor. works really smooth! :)
👍 Luksior, ja bym jeszcze dodał twardą sprężynę lub zestaw podkładek sprężystych do śruby napinającej taśmę żeby miała możliwość pracy bo przy nagrzewaniu od cięcia może cię wydłużać minimalnie. Ja niedawno wyhaczyłem i kupiłem jak nową BS260G cormaka w cenie i nie będę już budował. z jednej strony cieszę się z maszyny a drugiej szkoda że nie będzie chellengu z budowy :(
Tak czy inaczej dzięki za tipy i wymiary, może kiedyś się przydadzą, może zbuduję większą od tej co mam😀
Kolejne etapy obejrzę z przyjemnością jak i inne filmy. Powodzenia👍💪
Jeżeli będzie potrzeba to pomyślę nad sprężyną :D No pewnie bardziej opłaca się kupić gotową piłę, bo ja już dość sporo spędziłem czasu na budowie a wciąż napotykam problemy... Dzięki za follow i komentarze - bardzo mi miło :)
So cooool🎉
glad you like it! :)
Exelente video
I'm glad you like it! :)
Jaki koszt zamówienia takiego koła z pcbway?
Korzystałem z ich usług w zakresie pcb nie wiedziałem że mają obróbkę CNC w ofercie 😮
Jak dobrze pamiętam to koło 800zł. Warto podesłać model + rysunek to wycenią zlecenie.
Muito bom !
obrigado meu amigo! :)
Can you give me the file you sent to pcbway?
I shared it with all my patrons :)
Good,ı like it .ı make it
i'm glad u like it! :)
Next time motoreduktor electrical wiring.
Thanks for watching!
I will be there
@@dawidwrona4793 Hope so!
💪🏻😁
😎
Pierwszy
Hahah! :D
Gj
240 mm outher diameter. 5mm of wall gap depth. So it is 10 mm from both sides. The inner diameter is 230mm. Cut velocity is then 79 meters per minute. Am I right or? I am so, so ashamed that I do not know that. Yikes to me.
You're exactly right!
@@GBWM_CNC I am building similar machine, it will have 40meters per minute cutting speed. 79 is a little bit on the upper side for me. Thank you for your response.
@@MarioAPN from what I saw the bimetal blades should run at about 75 m/min for structural steel, about 80-100 for aluminium and like 50-60 for stainless. I don't cut much stainless so I should be fine but if you do cut harder materials you should definitely go for the 40 mpm setup :)
Mi pregunta es de que país sos ? Xq si tomas mate es Uruguay o argentina
:)
:D