🙏If you found this video helpful, please consider sending a couple bucks my way to say thank you by hitting the THANKS button under the video 💲❤. You can't imagine how much I would appreciate it. 🥰
Great job! Last year I did the exact same job, installing an ATOTO Android unit in my '98 Econoline E-350. BUT... I chose to go full install. It is a pitty that you didn't since the ATOTO unit is a smart one and has a lot of integration on it. I've installed a back-up camera which is activated automatically when I shift in reverse; I've installed a dash camera for the front that is connected to and controlled by the unit; because it is more convenient, I added the ATOTO steering control which very easy to use; I added also external tire sensors that communicate with the unit and display the pressure and the temperature or each tire, also send a warning signal to the speakers if there is a flat tire or it looses pressure below a treshold that you can customize; I've installed an external microphone for a better voice quality. All of these extra things I have added are ATOTO accesories, sold separately. It was well worth the extra money. Now I really have some updated tech in my van that many new modern vehicles are missing from the factory. I also used a different face frame to make the installation clean and neat.
The adaptors to a full install are too expensive for me to invest in for an unpaid video. These kinds of videos get some fews views they barely earn enough to justify the time invested to created them. The companies that send me the products, are just giving me the product, but no money. If I have to invest 2 $200 in parts to do a full install, I am just losing money. For this reason I do not do these kinds of videos that require me to buy parts to complete the video. It is just a loss of time and money for me. Add to this that RUclips is destroying channels like mine by cutting our revenue by 75% in the last year, and it is almost not worth it to create videos for RUclips anymore. People seem to only value mind crack content, while us Creator's who make useful content starve to death.
Oh boy I am so glad you made this video. I wanted a nice double din for a 1998 E350 RV I just purchased and I had been looking at the ATOTO radio what a coincidence! I bought one and I am glad you listed that bracket part I would have never found that. My dash is almost identical but a little different overall however the radio slot is identical so it's all working out beautifully so far. My wiring harness is a little different, it has 2 connectors not one but I'm able to use the old harness off the old radio just fine. I may only have to cut one of the top or bottom tabs off and I don't think I will have to cut the side tabs off at all there is a good bit of space there on both sides so we will see once my bracket comes in. I don't have a small access on the top of my dash like you to bring the wires for the wifi and GPS up there so I have to figure out something there hopefully it won't be to hard to get those in the same position. I wanted those up front on the top of the dash near the windshield too. Thanks for your video.
Thanks for visiting my channel and watching this video. If you enjoyed it, please punch the 👍 thumbs up button under the video. If you want to be notified when I release a new video, hit the SUBSCRIBE button and ding the BELL 🔔. Thanks for the support
I have a 1998 E150. I cut off the top and sides of the hole where the receiver slides in, just like in the video. The top and bottom had to come off. The sides were tight, so i cut them off too, just like in the video. The sides should not be cut off. When the sides are cut off, there is nothing to lock the mounting kit in place. Meaning, if you push on the receiver, it falls through the hole. I strongly advise, thinking twice before removing the sides. In hindsight, i think you should attempt bending and wiggling the receiver from side to side to get it in.
I have a 98 as well. Would love to pick your brain on some things. Not that I’m trying to completely overhaul but definitely want to make it better for when we’re driving it. Lol
Well Done nice Video I'am doing the same work in my Winnie minnie rv 1999. Thank you Greate help!! The only question I have is the harness connector to the radio connection comes with the radio.
Thank you for a very helpful video. I have one question about the microphone: you plugged it into the rear of the unit but where did the other end go? I looks like it should be accessible from the cab.
The model I got did not come with one, but they do sell one for it. I did not need one because the vehicle already had a rearview mirror unit installed.
Thanks for the great video! I am installing almost the same model of radio and was looking at the mounting kit. Its instructions say that once it clicks into place, you must remove the dash to remove the radio. But, you trimmed the sides! That's awesome, but how well does the radio hold into place? I noticed you had a little trouble seating it, is that because it no longer snapped into place? I want to be confident before I slide mine into place because I haven't a clue how to take the dash apart!
Hi. There is barely enough room in the dash for the android head unit I installed and it went very tight. Since the installation, the vehicle has traveled over 15,000 miles with no problems. The unit is still secure in the dash and has not worked loose. It is a very tight fit to get it though. Once in, it will be even more difficult to get it out. I hope this helps.
Thank you for your comment. I make these videos to help people. I am glad it was helpful to you. Can I ask you a favor? Covid has hit everyone hard, including me. I would really appreciate it if you could help me too. If you found this video helpful, I would sincerely appreciate it if you could share it or my channel one time with someone else that it might help. Thanks again.
@@thejungleexplorer It's been 2 years, how are you liking it, I finally replaced mine with a better one, went with a Kenwood, can't get used to having my phone connected.
If you want to remove the head is it easy to take out? I may want to put in a rear view camera just not yet? Deciding which one to choose. Thanks I shared. Great video.
Mine is a very old model that is not made anymore. If you will look in the description of the video, I have a link to a modern version of the tool in the video. I always provide links to the exact item if it is available, but in cases where the item is not available, I will link to something similar.
Home Depot has a good one... Ryobi. It works well and is reliable. I bought it and the guys at work beat it all the time. If it can stand up to those barbarians, you should be good :)
🙏If you found this video helpful, please consider sending a couple bucks my way to say thank you by hitting the THANKS button under the video 💲❤. You can't imagine how much I would appreciate it. 🥰
Great job! Last year I did the exact same job, installing an ATOTO Android unit in my '98 Econoline E-350. BUT... I chose to go full install. It is a pitty that you didn't since the ATOTO unit is a smart one and has a lot of integration on it. I've installed a back-up camera which is activated automatically when I shift in reverse; I've installed a dash camera for the front that is connected to and controlled by the unit; because it is more convenient, I added the ATOTO steering control which very easy to use; I added also external tire sensors that communicate with the unit and display the pressure and the temperature or each tire, also send a warning signal to the speakers if there is a flat tire or it looses pressure below a treshold that you can customize; I've installed an external microphone for a better voice quality.
All of these extra things I have added are ATOTO accesories, sold separately. It was well worth the extra money. Now I really have some updated tech in my van that many new modern vehicles are missing from the factory.
I also used a different face frame to make the installation clean and neat.
The adaptors to a full install are too expensive for me to invest in for an unpaid video. These kinds of videos get some fews views they barely earn enough to justify the time invested to created them. The companies that send me the products, are just giving me the product, but no money. If I have to invest 2
$200 in parts to do a full install, I am just losing money. For this reason I do not do these kinds of videos that require me to buy parts to complete the video. It is just a loss of time and money for me. Add to this that RUclips is destroying channels like mine by cutting our revenue by 75% in the last year, and it is almost not worth it to create videos for RUclips anymore. People seem to only value mind crack content, while us Creator's who make useful content starve to death.
Do you have a link or name for the different face frame you used?
Great tip with the multitool, made trimming the dash a breeze! Whole install took about an hour.
Oh boy I am so glad you made this video. I wanted a nice double din for a 1998 E350 RV I just purchased and I had been looking at the ATOTO radio what a coincidence! I bought one and I am glad you listed that bracket part I would have never found that. My dash is almost identical but a little different overall however the radio slot is identical so it's all working out beautifully so far. My wiring harness is a little different, it has 2 connectors not one but I'm able to use the old harness off the old radio just fine. I may only have to cut one of the top or bottom tabs off and I don't think I will have to cut the side tabs off at all there is a good bit of space there on both sides so we will see once my bracket comes in. I don't have a small access on the top of my dash like you to bring the wires for the wifi and GPS up there so I have to figure out something there hopefully it won't be to hard to get those in the same position. I wanted those up front on the top of the dash near the windshield too.
Thanks for your video.
Thanks for the help. I bought the basic ATOTO radio for my 1998 E150. The thing is an awesome upgrade.
Thanks for visiting my channel and watching this video. If you enjoyed it, please punch the 👍 thumbs up button under the video. If you want to be notified when I release a new video, hit the SUBSCRIBE button and ding the BELL 🔔. Thanks for the support
Thanks this will help me a lot I thought you needed to remove the whole dash cover to replace it
Thanks for the links. Ill have mine in in no time! :)
Found yah
Great video. Im about to do the same to my 2000 Coachman RV with E350 chassis. Thank you.
You're welcome.
I have a 1998 E150. I cut off the top and sides of the hole where the receiver slides in, just like in the video. The top and bottom had to come off. The sides were tight, so i cut them off too, just like in the video. The sides should not be cut off. When the sides are cut off, there is nothing to lock the mounting kit in place. Meaning, if you push on the receiver, it falls through the hole. I strongly advise, thinking twice before removing the sides. In hindsight, i think you should attempt bending and wiggling the receiver from side to side to get it in.
👍
I have a 98 as well. Would love to pick your brain on some things. Not that I’m trying to completely overhaul but definitely want to make it better for when we’re driving it. Lol
Love it! But not having a physical volume knob is criminal
👍
Excellent video. Thanks for the guidance!
Thank you for commenting Nicholas Morrissey Kepha! I am so glad the video was helpful.
Well Done nice Video I'am doing the same work in my Winnie minnie rv 1999. Thank you Greate help!! The only question I have is the harness connector to the radio connection comes with the radio.
There is an antenna cable adaptor that came with the unit I received, but I did not need it as the factor antenna cable was the right size already.
Thank you for a very helpful video. I have one question about the microphone: you plugged it into the rear of the unit but where did the other end go? I looks like it should be accessible from the cab.
I ran the mic up to the top left corner of the windshield.
May I know if the Atoto unit comes with backup cam n if you have it installed?
Thanks for the very detail video guide.
The model I got did not come with one, but they do sell one for it. I did not need one because the vehicle already had a rearview mirror unit installed.
I like your video. Could you make another one showing how to set everything up and how it work's like the blue tooth, nav, wifi etc.....
👍
Thanks for the great video! I am installing almost the same model of radio and was looking at the mounting kit. Its instructions say that once it clicks into place, you must remove the dash to remove the radio. But, you trimmed the sides! That's awesome, but how well does the radio hold into place? I noticed you had a little trouble seating it, is that because it no longer snapped into place? I want to be confident before I slide mine into place because I haven't a clue how to take the dash apart!
Hi. There is barely enough room in the dash for the android head unit I installed and it went very tight. Since the installation, the vehicle has traveled over 15,000 miles with no problems. The unit is still secure in the dash and has not worked loose. It is a very tight fit to get it though. Once in, it will be even more difficult to get it out. I hope this helps.
Great Video, excellent . I do wonder what would it take to remove this radio?
Thank you for commenting Phillip Poirier! I am so glad the video was helpful.
Thx for the vid, Could the WiFi and GPS ends be double sided taped to under that access pannel and still work? Would have been a cleaner look......
Yes
Hello what kind of cable is the one you connected to the touch screen radio
Are you talking about this one? amzn.to/49mJXnj #AD
Hello! Where did you get your mounting brackets from. Trying to find mounting kits for a 2001 E250 is like looking for a needle in a haystack.
Here is a link the the kit used in this video.
amzn.to/3cr1H4T #ad
Thank you so much! You just don’t know how much of a great help you are.
I like your video... Could you make another one showing how everything works ... Like connecting your phone to blue tooth etc.
👍
Great video. Super helpful.
Thank you.
Glad it was helpful!
Did u hav issues with rebooting when powering on?
No. I occasionally have issue with it freezing up and needing to be rebooted when running navigation apps for a long time.
Thanks for the video good information.
Thank you for your comment. I make these videos to help people. I am glad it was helpful to you.
Can I ask you a favor? Covid has hit everyone hard, including me. I would really appreciate it if you could help me too. If you found this video helpful, I would sincerely appreciate it if you could share it or my channel one time with someone else that it might help. Thanks again.
I ran my head unit usb across the dash, dropping it into the door panel pouch.
Thank you for commenting Maples01!
@@thejungleexplorer It's been 2 years, how are you liking it, I finally replaced mine with a better one, went with a Kenwood, can't get used to having my phone connected.
@@Maples01 This install was not for me, it was for a friend. He still has it and likes it though.
If you want to remove the head is it easy to take out? I may want to put in a rear view camera just not yet? Deciding which one to choose. Thanks I shared. Great video.
It can be taken out. The fit was a little tight on my installation and may require a little force to get it out, but it can be taken out.
Is the ignition ran through the radio creating a no start issue?
I am sorry. I don't understand what you are asking.
What was the tool you used to trim out the opening? Milwaukee of some sort or ??? Have not seen that one as yet.
Mine is a very old model that is not made anymore. If you will look in the description of the video, I have a link to a modern version of the tool in the video. I always provide links to the exact item if it is available, but in cases where the item is not available, I will link to something similar.
Home Depot has a good one... Ryobi. It works well and is reliable. I bought it and the guys at work beat it all the time.
If it can stand up to those barbarians, you should be good :)
Now, how do you remove it after the install?
The same way you install it, only in reverse.
@@thejungleexplorer Nothing to grab in to to pull it out.
@@jaygold4467 At 8:02 in the video I talk about how to get it out.
Thanks.
Hey my new car that I got came with that exact same atoto but it doesn’t turn on
Thank you for commenting Fierros RJ5! I am so sorry to hear that.
Does any double din stereo work or it has to be that one specifically?
I would imagine that this method would work for most standard size double sin units.