I have been fighting with my printer for months now, thinking it was a clogged printhead,. Cleaning it over and over. Now I see air in the pipes may be the cause of all my stress. I did not know the pipes were supposed to remain filled. Now I see there are other videos about this too, but I had only been searching for printhead helps. I am so sick of cleaning, wasting ink and my waste ink receptacle room, then I finally get a good nozzle check, only to go back to the same problem. ...They say insanity is repeating the same thing over and over, expecting a different result... Well, mine has been a maddening problem alright! Although it is not yet fixed, a glimmer of hope has appeared. I see where others say this video shows it best. I already have the syringes, so I am eager to start. Thanks for posting this and saving the day and my sanity!!
Although my printer is under guarantee, by using your method, I fixed the air removal method from the pipes. This process saved my repair waiting period as well as taking and bringing back the printer from the shop. Thanks for your help.
Thanks a bunch. great detailed instructions. watched a few different ones before but yours was the best. Anyone trying this, don't get discouraged it took me a couple tries at first before it worked. I only used one syringe with little ink loss. Good luck to all.
even after removing all the air from the tubes then again why are you pressing setting no 10 for ink flush no need for it, just press setting and + to number 3 for deep cleaning the head thats it
Thank you for sharing this video however, there is another easy steps which will save your time. Switch on your printer, make sure both the power and WiFi light is on and long press the stop button till the orange light(error light) blink for 5 times, immediately release your finger from the stop button. You will see automatically the ink tube will fill the colour removing air. Try once it will work. Jai Hind! 🙏
My canon G3010 only prints perfectly in Photo Paper Glossy or Photo Paper Matte. However, if i try to use common paper, it will not print black correctly (a lot of text will not be printed) and every other color is fine. Can someone help me out? I've tried all 3 cleaning methods. Thanks in advance.
I have been fighting with my printer for months now, thinking it was a clogged printhead,. Cleaning it over and over. Now I see air in the pipes may be the cause of all my stress. I did not know the pipes were supposed to remain filled. Now I see there are other videos about this too, but I had only been searching for printhead helps. I am so sick of cleaning, wasting ink and my waste ink receptacle room, then I finally get a good nozzle check, only to go back to the same problem.
...They say insanity is repeating the same thing over and over, expecting a different result... Well, mine has been a maddening problem alright! Although it is not yet fixed, a glimmer of hope has appeared. I see where others say this video shows it best. I already have the syringes, so I am eager to start. Thanks for posting this and saving the day and my sanity!!
Thanks for watching my video.this method saves ink and doesn't fill the waste ink pad too early
Although my printer is under guarantee, by using your method, I fixed the air removal method from the pipes. This process saved my repair waiting period as well as taking and bringing back the printer from the shop. Thanks for your help.
Thanks much! I thought Ink Flushes were the only way. Your way saves ink and restores printing!!
Yes sir this procedure saves around 10-15 % of ink
Thanks a bunch. great detailed instructions. watched a few different ones before but yours was the best. Anyone trying this, don't get discouraged it took me a couple tries at first before it worked. I only used one syringe with little ink loss. Good luck to all.
Best tutorial. Solved my problem in 5 minutes.
Very nicely demonstrated. 👌
Thanks a lot 😊
Thank you so much for uploading this video
even after removing all the air from the tubes then again why are you pressing setting no 10 for ink flush no need for it, just press setting and + to number 3 for deep cleaning the head thats it
Thankyou very much sir.This method worked
Thank you for sharing this video however, there is another easy steps which will save your time. Switch on your printer, make sure both the power and WiFi light is on and long press the stop button till the orange light(error light) blink for 5 times, immediately release your finger from the stop button. You will see automatically the ink tube will fill the colour removing air. Try once it will work. Jai Hind! 🙏
thank you so much
Sir, i did only the 2nd part not the syringe part,still problem is solved.
Is it the same method for G3010 ?
Yes sir for saving ink this procedure is good or else you can do ink flushing from printer but it takes a lot of ink
1:44 muje ye chiz pata nahi thi.
thanks:)
My canon G3010 only prints perfectly in Photo Paper Glossy or Photo Paper Matte. However, if i try to use common paper, it will not print black correctly (a lot of text will not be printed) and every other color is fine. Can someone help me out? I've tried all 3 cleaning methods. Thanks in advance.
NICE
Printing bala up down nhi ho rha h
Can we kill the music ?it’s not necessary …
It's not ok.
Because all colours are different
Hindi v bol liya karo India me ho