Wow this has got to be the most insanely technical and brilliant iphone repair I've see!. Technically and artistically brilliant however perhaps too time consuming to be economically useful.
@@matthewJamesKendell thank you very much brother. You're definitely right. It's time consuming. But it's worth to wait the end process. By the way. Really appreciate you☺️☺️☺️
You have done a truly impressive job. Your work and patience with what you have done is admirable. I want your opinion. I have the same problem on my iPhone 13 Pro Max screen. I would like to do the same thing you did, but I would like to know if this solution is permanent and safe to install or simply remains as a "test screen".
@@MarshallElectronics thank you so much brother. you’re words is very overwhelming. and yes. this is permanent. actually this video is already 1yr now. till now my client never message me if she got any problem about her lcd. i think. if you done perfectly like what i’ve done in the video. it’s definitely a permanent solution with a very cheaper cost.
@@MarshallElectronics take note. you must cut and place perfectly the donor flex. not to much not to little. you must observe very carefully the position of the flex before you do jumpers. make sure if you place the lcd fit into frame. the flex doesn’t move even a little.
That is a piece of flex cable of broken lcd. You dont need to buy that strip. Just look into your broken lcd’s specially on andriod. Because it has a thinner flex cable than 13 series. And use a super glue or mighty bond to firm it. 👍👍👍
@@ScjRepairShop-Hi again, could you tell me where the jumper wire is from or the brand, is it enamelled? I just did a similar repair with only 6 connection.
@@ScjRepairShop- Could you give me some website links? I would be happy to give you a donation for your time and help. I need to larger size but I dont think its 1.5mm that seems too big. I'm from the UK.
Nice work!! What kind of Jumper Wires did you use? I know 0,007mm and 1,5mm right? Is the 0,007mm wire a silver wire and the 1,5mm a copper wire? Because I only can find silver wires that are 0,007mm thin...
Coool, so it won’t be as impossible as your case :D If I’m right I can just connect this layer with many traces because there should be one small trace for ground too
@@krismadley9706 absolutely right sir. and jumpering those line is like an ABC’s simple as that. just align those flexes with a proper positioning then you’ll connect those lines one by one gradually and test the result. you will get 101% results if you done the process properly and perfectly so good-luck. 👌👌👌
If you want to change the whole display flex , it’s possible, here in our country will cost you about 159usd to 179usd,, but if you want this kind of process you can spend around 88usd ,
Thanks for sharing this interesting video!! I have a 12 Pro Max incell display. Do you know how many layers does it have? I want want to try to fix it because it has a broken flex cable as well.
There’s 2main layers on incell. But if you have successfully scrape it . You will see there’s 4 layers on it. The 2 thick layers is designed to firmed each of 2 main layers.
No problem brother. You can skip the 2thick layer. If you want. But is bettery to put some wire on it to firmed the 2main layers. Because its design that way.
Can you fix iPhone 12 display flex I think it’s broken because it’s goes black and phone is working but display is working properly after soft reset but then it’s happened and I have to soft restart again can you help me with this
Absolutely right brother, but if you done successfully this kind of work, and the money you got for this , you can use it to take vacation and enjoy, believe me you earn a priceless memory in this short cycle of life,
Wow this has got to be the most insanely technical and brilliant iphone repair I've see!. Technically and artistically brilliant however perhaps too time consuming to be economically useful.
@@matthewJamesKendell thank you very much brother. You're definitely right. It's time consuming. But it's worth to wait the end process. By the way. Really appreciate you☺️☺️☺️
Grabe!!! Proud to be,.. kudos to this technician nakakabilib dahil kapwa pinoy pa gumawa nito,keep up the good work brother,😊😊😊
Maraming salamat po boss😊😊😊
you're either crazy or you tore that flex and the customer is in hurry 😂
Flawless work 👏
@@unknownx9093 actually one of my co technicians did that😂😂😂 and i’m his savior 😂😂😂 thank you thu😘😘😘
Man, you're a star :)
Thank you so much brother😍😍😍
You have done a truly impressive job. Your work and patience with what you have done is admirable. I want your opinion. I have the same problem on my iPhone 13 Pro Max screen. I would like to do the same thing you did, but I would like to know if this solution is permanent and safe to install or simply remains as a "test screen".
@@MarshallElectronics thank you so much brother. you’re words is very overwhelming. and yes. this is permanent. actually this video is already 1yr now. till now my client never message me if she got any problem about her lcd. i think. if you done perfectly like what i’ve done in the video. it’s definitely a permanent solution with a very cheaper cost.
@@MarshallElectronics take note. you must cut and place perfectly the donor flex. not to much not to little. you must observe very carefully the position of the flex before you do jumpers. make sure if you place the lcd fit into frame. the flex doesn’t move even a little.
hello ive reached out because i need same repair on my iphone 13 pro would u please do it?
@Tyyronn hello sir . You're in a right path.
ruclips.net/video/yDcWzsYohlU/видео.htmlsi=h_l856cofN6JdB9P
@Tyyronn how can i help you sir?
@@ScjRepairShop- can i somehow send u the lcd? iam from europe
@Tyyronn definitely yes sir
@Tyyronn can we talk in WhatsApp +639673505266
What thread did you use to make the bridges? what measure
0.07mm the silver wire. And the copper is 1.5mm
6:45 Hi, what do you call that black strip that you place underneath? Where can I buy it? I can't find it. Thank you!
That is a piece of flex cable of broken lcd. You dont need to buy that strip. Just look into your broken lcd’s specially on andriod. Because it has a thinner flex cable than 13 series. And use a super glue or mighty bond to firm it. 👍👍👍
Hats off for your tech. Can I pay for my iPhone 13 Pro display cable repair?
@@딜닉 yes sir.. can we talk here ( WHATSAPP +639673505266)
Can you tell me where to buy the thread you used in that repair? Send me the Aliexpress link. I need to do that repair urgently
@@cesarloreto4746 a.aliexpress.com/_opDAQve
I recently tore the flex on my 13 pro max as well
How much would it cost to get this repair by you including shipping cost from and to America
Wow wow no words to express your skills,..
Much appreciated brother .your kindness is priceless 🤝🤝✌️✌️
@@ScjRepairShop- I want to share a video of my iPad air m1 to you, I am facing some issue with my iPad ,pls help me
@@albinrezwan1999 ok brother let’s talk in WhatsApp
+63 967 350 5266
this is absolutely god tier unhumanly possible sent down from the heavens wow...
@@cod4Rlp your amazing sir. You're words touch my heart it's very overwhelming. Thank you so much.
@@ScjRepairShop-Hi again, could you tell me where the jumper wire is from or the brand, is it enamelled? I just did a similar repair with only 6 connection.
@cod4Rlp you mean the size of the wire did i used? It's a 0.007mm you can buy it to alibaba or AliExpress sir and the thick one size is 1.5mm
@@ScjRepairShop- Could you give me some website links? I would be happy to give you a donation for your time and help. I need to larger size but I dont think its 1.5mm that seems too big. I'm from the UK.
U r very talented
Thank you so much brother. Much appreciated 😍😍😍
Hello Do you know how many layers i find at 14pro display cable?
@@nog.6825 same on iphone 13 pro max. 5layers
I need a 0.005 thread? where do I buy it?
Thank you for sharing! Nice cutting skills.
Do you know how many layers i find at 13mini display cable?
Same as 13pro max, if im not mistaken all the 13 series have 5layers flex display.
Nice work!! What kind of Jumper Wires did you use? I know 0,007mm and 1,5mm right? Is the 0,007mm wire a silver wire and the 1,5mm a copper wire? Because I only can find silver wires that are 0,007mm thin...
Just buy a solder wick with 1.5mm size of it. Then cut it. manually separate it just like what i did in the video.
Super legend ❤
Thanks bro. Much appreciated 😍😍😍
How many layers does iPhone 12 has? I have display with 2 flexes torn, and I’m not sure if it is worth it..
@@krismadley9706 each flex has a two layers .
And one whole layer of these two is ground ?
@@krismadley9706 yes sir
Coool, so it won’t be as impossible as your case :D If I’m right I can just connect this layer with many traces because there should be one small trace for ground too
@@krismadley9706 absolutely right sir. and jumpering those line is like an ABC’s simple as that. just align those flexes with a proper positioning then you’ll connect those lines one by one gradually and test the result. you will get 101% results if you done the process properly and perfectly so good-luck. 👌👌👌
merbhi 13 pro max me orange lining blink krra h display me jumping se thk ni hua to flex change krna padega kya aur uska cost kitta padega
If you want to change the whole display flex , it’s possible, here in our country will cost you about 159usd to 179usd,, but if you want this kind of process you can spend around 88usd ,
Brother please tell me which jumper wire did you used because I use 0.009 very hard for me thanks
0.007mm and 1.5mm brother.
@@ScjRepairShop- thanks brother other question is iPhone 14 Pro max flex is 3 layers ???
hi master.. please make a video for LCD iphone 14 pro Display Flex repair Fixed.
thank you
I'm working on it brother☺️☺️☺️
Estaño 138 o 183?
@@cesarloreto4746 183
I cut my phone flex can you fix it !
Where is your shop ?
+639673505266 let's talk in WhatsApp so we can manage how to fix your problem sir,
Thanks for sharing this interesting video!!
I have a 12 Pro Max incell display. Do you know how many layers does it have? I want want to try to fix it because it has a broken flex cable as well.
There’s 2main layers on incell. But if you have successfully scrape it . You will see there’s 4 layers on it. The 2 thick layers is designed to firmed each of 2 main layers.
Thanks for the fast reply!!🎉
So I sholud only do the 2 thicker layers?
How do I know which are the 2 correct layers?
Thanks!!
No problem brother. You can skip the 2thick layer. If you want. But is bettery to put some wire on it to firmed the 2main layers. Because its design that way.
You can Analyze the 2main layers cause they have more lines than the 2thick layers have one wider lines.
Thanks you my friend!! You helped me a lot!!❤️
Bro will true tone be ok?or it will be gone?
True tone perfectly restored also☺️☺️☺️
Price for repair?
Can you fix iPhone 12 display flex I think it’s broken because it’s goes black and phone is working but display is working properly after soft reset but then it’s happened and I have to soft restart again can you help me with this
@@Yvngxan999 have you try to change a new display to make sure the display is truly the issue ?
Tell me those Jump wire size please
1.5mm and 0.007mm , good luck brother ✌️✌️👨🔧👨🔧👨🔧
Wow🤩🖤
It will take your priceless 10 hours
Absolutely right brother, but if you done successfully this kind of work, and the money you got for this , you can use it to take vacation and enjoy, believe me you earn a priceless memory in this short cycle of life,
I broke my iphone 15 lcd cable flex. Can u fix it?
@@maxbrand2939 yes i can. Let's talk in WhatsApp +639673505266
@@ScjRepairShop-can u fix also mine ? And where are u from ?
this is hell and doing great
really appreciate men!!! ☺️☺️☺️
Can i ship my display your place to fix and you send me back?
Okay. Message me on WhatsApp so i can give you instructions. On how we start that shipping process
i have a 14 pro display and 13p display and live in germany. Can you help me too?
iPhone 12 strip join videos
fix mine
Okay bro. Let me do what i can do.
contact?
@@jackfrostjr1756 drop your whatsapp number bro.
oled 13 pro max screen launched
Here in our country only original . No replacement. And even if replacement is available. It should better to use original screen than oled. ✌️✌️✌️
I cut my phone flex can you fix it !
Where is your shop ?