Looks killer man! I had a set of trip 5rs on some star fish wheels on my new edge for awhile. You'd be surprised how much dropping the tire pressure just a few psi will also help as well! I kept a small tire compressor in my truck so I could adjust it 😂. I'd drop it to 25-27 to make it hook depending on the weather and normal driving was around 35 ish. Every setup is different though. Your going to LOVE it once you get it dialed in 👌
🤣😂🤣 beautiful hunk of a man 😂🤣 that cracked me up. Im suprised that after you put the drag pack on that you didn't run over to Onyx and start dry humping him 😂🤣 that would have been really hilarious 😂🤣 but yeah man that setup looks really good. What size motor are you planning on building with the block that you got? Ive got a spare block that im going to build something with it probably another 347 to be honest and find a mustang to puf it in
@@lollis_garage3683 nah it won't take long especially with the amount of coin that you have laying around your house and in the bank. 😜 So go ahead and knock the dust off of some of it and buy your stroker kit😜. Im finally about to have mine running again after having to pull it back out tear it apart and get the block fixed then put it all back together but I decided to go with a bigger cam, bigger ported and milled heads and a ported single plane victor Jr. So it should be pretty decent hopefully and maybe tote the front tires half track in the 1/4 but can only dream of toting them full track 😆🤣
They look great! I'm pretty sure you'll be a little quicker at the track with those. Ive always found with a drag pack I still want to have another street set up for turn burnin'.
He'll ya. I'm finna drop 4k in my 5.0. Aluminum heads, ima get the 650 carb kit just like what you got. And I'm gonna run noss. Already got a xcam, headers and exhaust with 3.73s but im got 4 30s I've been polishing up gettin ready to install. Hopefully I make as much power as yours. You got a clean runnin build. Maybe one day we can race lol. It would be good content
How did the old wheels fit (r350) looking to do this Brembo swap so not sure if my 17’s will clear, but looks promising however I love those wheels. Any need for spacers? Sizes?
Killer on the wheel setup we are gonna need a track video after you get new tires
Drag pack looks good but I do love the SVE rims! CANADIAN SUPERMAN APPROVES
Looks cool 👍🔥!
What size are the front skinys and the back slick Rims?
This is probably still the most slept on
Channel on the tube man
Ayyye that means a lot! 🤟🏼
@@lollis_garage3683 hell yea bro once I found your channel a couple months ago I’ve been watching everything
Gonna miss those 350 wheels but was a good trade. Can’t wait to see how Onyx does at the track.
I’m ready to start hitting the tracks again myself
Looks killer man! I had a set of trip 5rs on some star fish wheels on my new edge for awhile. You'd be surprised how much dropping the tire pressure just a few psi will also help as well! I kept a small tire compressor in my truck so I could adjust it 😂. I'd drop it to 25-27 to make it hook depending on the weather and normal driving was around 35 ish. Every setup is different though. Your going to LOVE it once you get it dialed in 👌
🤣😂🤣 beautiful hunk of a man 😂🤣 that cracked me up. Im suprised that after you put the drag pack on that you didn't run over to Onyx and start dry humping him 😂🤣 that would have been really hilarious 😂🤣 but yeah man that setup looks really good. What size motor are you planning on building with the block that you got? Ive got a spare block that im going to build something with it probably another 347 to be honest and find a mustang to puf it in
Plan on doing a 347 it may take a while to do it but that’s the plan!
@@lollis_garage3683 nah it won't take long especially with the amount of coin that you have laying around your house and in the bank. 😜 So go ahead and knock the dust off of some of it and buy your stroker kit😜. Im finally about to have mine running again after having to pull it back out tear it apart and get the block fixed then put it all back together but I decided to go with a bigger cam, bigger ported and milled heads and a ported single plane victor Jr. So it should be pretty decent hopefully and maybe tote the front tires half track in the 1/4 but can only dream of toting them full track 😆🤣
Looks good! My 97 been running staggered Cobra R's for 4 years. About time I mix it up.
Yeah I like to change my car up so I don’t get tired of it.
Damn that looks good!👍
Looks great. I still run my quad shocks also
U r really bringing it along sir ,keep it coming sir
MSD 6al-2 box, set up your launch control.
They look great! I'm pretty sure you'll be a little quicker at the track with those. Ive always found with a drag pack I still want to have another street set up for turn burnin'.
Hoping to run some better times when it open back up
Looking good
Looks good bro
Sick bro 😎 👌🏻
Got a question for you on the sn95’s can they run +35mm offset all the way around will there be any issues? If you can help thank you!
Should help you out
Very nice trade man
Car looks bad ass!! U happen to know what size spacer he was running? thx
1 inch
Beautiful
New rims look GREAT 👍
Sweet ride and not afraid to use it 👍
She looks pretty good. Looks like you were down in my neck of the woods in SC.
You should put a nitro NTO5 on the rear or Mickey Thompsons
Looking into new ones now!
Wheels look Awesome !! Have you done anything mods to the T5, to make it hold up ?
No it’s a bone stock t5 they’ll hold up a lot better than people think you just can’t be to crazy on a real sticky tire on a good prepped surface
What steering wheel hub and steering wheel are you using?
What tire size up front? Just got my 17x4.5 wheels
Looking sharp 🔥🔥🔥
He'll ya. I'm finna drop 4k in my 5.0. Aluminum heads, ima get the 650 carb kit just like what you got. And I'm gonna run noss. Already got a xcam, headers and exhaust with 3.73s but im got 4 30s I've been polishing up gettin ready to install. Hopefully I make as much power as yours. You got a clean runnin build. Maybe one day we can race lol. It would be good content
Maybe one day! 💪🏼
Bro just bought a sn95 4.6 im in love with it i use to have a 03 gt thats why i got this lol
R350 wheels nooooo😟! One of my dream wheels. The new wheels look awesome.
I really like the r350s but these are nice as well
Looks great!
I appreciate it! 👍🏼
Any idea how big the wheel spacer in the back was?
On the orange car the wheel spacer I believe was 1 inch on my car I have a 1/4 inch wheel spacer
Those look killer brother
Thank you 🙏🏼
Get some traction bars it’ll fix the body roll problem with the drag pack
The other set up with spacers was the way to go
315s for the rear!
I think it looks great! What is the size of the rims and what are the size of the tires?
It’s a 17x5 front don’t know the tire size I haven’t even looked! 😂 but the rear is 15x8 with 275/60/15
I plan to go with a wider rear wheel and tire though
How did the old wheels fit (r350) looking to do this Brembo swap so not sure if my 17’s will clear, but looks promising however I love those wheels. Any need for spacers? Sizes?
The r350s fit great and they could use a spacer in the rear maybe a 1/2 inch. But they should fit brembos
@@lollis_garage3683 what are the sizes? Looking for something similar to my current with I have 17x10 up front and 17x10.5 in the rear
Honestly I think both wheels look good 👍
@@tyrellhamilton9399 mine is 17x4.5 front runners and 15x8 rears but rear is 275/60/15 and 195/35/17
@@lollis_garage3683 what about the sizes of the old wheels?
They look mean as hell can’t wait to get a drag pack for mine
They definitely make the car look menacing!
I have the same wheels on my SN95... I think they look better with the Jegs black center caps...
Yeah I definitely like this setup, I’ll look into the center caps!
Jegs PN 555-69178 for the backs, and 555-69176 for the fronts...
@@lollis_garage3683 do it
Knock on wood🤣
My Thoughts, THEY LOOK LIKE SHIT, CRAP ,AFTERBIRTH, ELPHANT PIES .and THE STUFF AT THE SEWAGE TREATMENT PLANT////
I just had a great idea, you buy me the wheels you like and I’ll put them and won’t charge you a dime!
@@lollis_garage3683 just a troll. His last comment was about your wallet always being full. Probably some kid.
@@TheModAddict lol my Wallet being full 😂 next joke!!!
Bad asx
Quit trying to be like Taylor! You don't have a newedge mach 1. Said the guy who swapped everything newedge on his 98
😂 he’s going with a different drag pack so leave me alone lol!