Pulling a transmission and transfer case WITHOUT a lift - Trailblazer Envoy 4x4

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 49

  • @supersawyer358
    @supersawyer358 2 года назад +4

    Yes installing it is far worse. I pulled and rebuild a 4R75E Ford transmission. Rebuilding it yourself isn't bad. Works like a charm and saved a ton of money.

  • @anthonywelsh481
    @anthonywelsh481 Год назад +2

    You did a good job.

  • @adrianshumate4564
    @adrianshumate4564 2 года назад +3

    Another great step by step Dan. Automatic trans remove and replace is a job alot of people think is impossible, but it's totally doable with the right tools!

    • @TheDaninator
      @TheDaninator  2 года назад +3

      Thanks Adrian. Was thinking it was going to be horrible but it wasn’t bad at all. A little messy, if you’re an idiot like me. LOL

    • @adrianshumate4564
      @adrianshumate4564 2 года назад +3

      @@TheDaninator I've never changed one that didn't turn into the Exonn Valdez.

    • @TheDaninator
      @TheDaninator  2 года назад

      @@adrianshumate4564 😂

    • @donaldchaplin2564
      @donaldchaplin2564 6 месяцев назад

      You made it look like the way I would try to do it. I've got a 2001 blazer that I'm debating about pulling the trans out of and it too would be on the driveway. But I've only got gravel. Wish me luck. Thanks for all the useful tips. Don C.

  • @jewski27
    @jewski27 2 года назад +5

    It'll be easier to remove transfer case first then the trans. future reference

  • @designsinorbit
    @designsinorbit Год назад +3

    I'm living this nightmare right now.

  • @robertgentry7752
    @robertgentry7752 2 года назад +1

    You made that look so easy I have been procrastinating about doing a transmission swap forever

  • @robjohnston5292
    @robjohnston5292 2 года назад +2

    You made it look so easy! I can't imagine doing that on my back.

  • @scottschmidtmann2540
    @scottschmidtmann2540 2 года назад +1

    You sold me on the ratcheting box end wrenches! Pick up a set last weekend.

    • @TheDaninator
      @TheDaninator  2 года назад +1

      Awesome! Will not regret that purchase 👍

  • @oldbiker9739
    @oldbiker9739 2 года назад +1

    well done young man ,well done .

  • @waltschannel7465
    @waltschannel7465 2 года назад +1

    I'm impressed how much work you got done with the Harbor freight impact driver! I just discovered your channel and loving it.

    • @TheDaninator
      @TheDaninator  2 года назад

      Thank you. That little driver can’t do everything, but it can do a lot. 👍

    • @waltschannel7465
      @waltschannel7465 2 года назад +2

      @The Daninator I was impressed with the specs. 1300 in lbs of torque. I didn't believe them, though. That's more than my 3 year old DeWalt. I believe more now.

  • @damxgopak457
    @damxgopak457 2 года назад +1

    Get a set of the extra long flex head ratcheting with offset wrenches you will love them.

  • @bluebyrdnit
    @bluebyrdnit 9 месяцев назад +1

    what a great video...now that's how you do a video for Diyr's...thanks

  • @bradc9491
    @bradc9491 2 года назад

    The tranny on my Envoy went out last month. I'll be doing this soon. Thanks for showing me what I'm in for.

  • @living9377
    @living9377 6 месяцев назад +1

    Nice job! Surprised you forgot to drain the tranny but all and you made it look easy. Thanks for sharing! 💯👍

    • @TheDaninator
      @TheDaninator  6 месяцев назад

      Yeah, shoulda remembered to drain the trans! Won’t make that mistake again. 😂

  • @donaldhalls2189
    @donaldhalls2189 2 года назад +6

    If you split the transmission and transfer case, it'll make it easier

    • @LongDefiant
      @LongDefiant Год назад

      Yeah, I pulled mine separately.

  • @markb3129
    @markb3129 2 года назад +1

    I agree the 1/4" impacts are worth the money.. seems like the Bauer cordless tools are pretty good!!! ✌🏻

    • @TheDaninator
      @TheDaninator  2 года назад

      So far, so good. I’m happy with it 😎👍

    • @wild8757
      @wild8757 Год назад

      Their Hercules line is even better

  • @TheDaninator
    @TheDaninator  2 года назад

    Have you pulled a transmission? How did it go?

  • @bluebyrdnit
    @bluebyrdnit 9 месяцев назад

    I have a 2005 TrailBlazer and it's grinding bad when I put it in reverse, what do you think it could be?

  • @donaldhalls2189
    @donaldhalls2189 2 года назад +1

    I useualy let the transmission hang down so I can reach things easier, and get to the top with long extensions and swivels,from over top of the transmission, all the best to you and your loved ones

    • @TheDaninator
      @TheDaninator  2 года назад +1

      Yep, letting it hang made it much more manageable to get the bell housing bolts!

  • @wild8757
    @wild8757 Год назад +2

    At least your deep tranny pan came with a drain plug, my 06 has a deep pan with no damn drain plug, if you’re not careful you get to take a shower at the same time you change your transmission filter and fluid.

  • @MBFH7811
    @MBFH7811 Год назад +1

    Great video thanks very much

  • @thrillbilly9785
    @thrillbilly9785 2 года назад +1

    I’ve dropped out manual transmissions on a couple firebirds for clutch disk repairs, far easier than what you went through. Automagics are tough but can be done by a DIY dude for sure.

  • @chemicalspore
    @chemicalspore 2 года назад +3

    You ever see a tree bark??

    • @TheDaninator
      @TheDaninator  2 года назад

      They don’t only bark, they’ve been branching out.

    • @davidgrisco1939
      @davidgrisco1939 2 года назад +1

      @@TheDaninator Okay, I'm "leaving" now... :)

  • @Mike_The_Hog_A_Nator
    @Mike_The_Hog_A_Nator Год назад

    My beautiful 02' Blazer ZR2 reads as a Trailblazer on my scanner & my mechanics scanner for some reason.
    Aren't these 2 different vehicles?
    I had my 4L60e rebuilt a few years back. $2200
    The "Sunshield" or whatever they call it snapped, I hear this is a major issue if you have a stock Shield. It's located right in the middle of your tranny, so you might as well rebuild it. Great info.
    About to tackle my drivers side rear bearing tomorrow.

  • @samking3920
    @samking3920 2 года назад +1

    Been watching your videos a while now. Have 4 trailblazers myself great suvs . Wondering Why you parted out that ext ?

    • @TheDaninator
      @TheDaninator  2 года назад +1

      I bought it for the parts. It had a blown motor.

    • @rickbaker9053
      @rickbaker9053 7 месяцев назад

      How come you didn't just replace the motor if that was it?

    • @rickbaker9053
      @rickbaker9053 7 месяцев назад

      It was pretty clean underneath

  • @thehammermanduke
    @thehammermanduke 9 месяцев назад +1

    Oh Yeah 🎉🎉🎉🎉

  • @TBD3.0
    @TBD3.0 Год назад +1

    I love these kinds of videos better than watching some movies. These types of videos are raw real life events with all the mistakes a person can make it's perfect it doesn't sugar coat anything and that's what I like I want to know what I may encounter and watching it happen the good the bad the ugly 👍🏻GREAT STUFF👍🏻
    Greetings from CommieFornia a.k.a. California U.S.A.🇺🇸
    TBD3.0(Toothless Bull Dog 3.0)

  • @jazzridez
    @jazzridez Год назад

    WHERE IS PART 2 AND 3 AND 4???????